Citroen-2CV / AMI6+8 / suspension, spring struts, suspension cylinder

Suspension pot big (130mm), new part. Suitable for Citroen AK400, AMI8. Optically like original.

Quality: 3

Suspension pot locking cap, for large suspension pot. Suitable for Citroen AK, ACDY, Ami 6+8. per piece. Reproduction.

Quality: 4

Suspension pot casing of large diameters, produced from high-grade steel. 130-135mm. Suitable for Citroen AK400, ACDY, AMI6+8. the suspension pot casing is supplied without locking caps.

Quality: 4

Suspension pot casing of large diameters, produced made of metal. 130-135mm. Suitable for Citroen AK400, ACDY, AMI6+8. The suspension pot casing is supplied without locking caps.

Quality: 4

• Suitable for this article
• Suspension pot locking cap, for large suspension pot. Suitable for Citroen AK, ACDY, Ami 6+8. p
  38,58 €

Suspension pot hinged tie bar short. (593mm, for the front axle). Suitable for 2CV starting from year of construction 06/1972. Very good reproduction from the European Union.

Quality: 3

• Suitable for this article
• Friction disk (plate) for the small suspension pot. 110mm diameter. Suitable for Citroen 2CV.
  21,72 €

Suspension pot hinged tie bar short. (600mm, for the front axle). Suitable for 2CV starting from year of construction 06/1972. Reproduction

Quality: 4

• Suitable for this article
• Friction disk (plate) for the small suspension pot. 110mm diameter. Suitable for Citroen 2CV.
  21,72 €

Suspension pot hinged tie bar long. (632mm, for the rear axle). Suitable for 2CV starting from year of construction 06/1972. Very good reproduction from the European Union.

Quality: 3

• Suitable for this article
• Friction disk (plate) for the small suspension pot. 110mm diameter. Suitable for Citroen 2CV.
  21,72 €

Suspension pot hinged tie bar long. (640mm, for the rear axle). Suitable for 2CV starting from year of construction 06/1972. Reproduction

Quality: 4

• Suitable for this article
• Friction disk (plate) for the small suspension pot. 110mm diameter. Suitable for Citroen 2CV.
  21,72 €

Spring hinged tie bar adjustment (from high-grade steel) with eye. New version (Installed starting from year of construction 11/1971 to 1990). These adjustment eyes are produced completely from high-grade steel (type 304). Additionally they have a small bore, so that they can be lubricated. Top quality and best processing. Produced in Europe! Suitable for all Citroen 2CV, Dyane, AMI. (Securement eye for the triangle pin at the radius arm). Per piece.

Quality: 1 360°

• Suitable for this article
• Fixing clip for the triangle pin. (fitting for small and large triangle pins). For Citroen 2CV,
  0,79 €
• Triangle pin small, top quality. Suitable for Citroen 2CV in front. (Securement the suspension
  10,82 €
• Triangle pin largely, top quality. Suitable for Citroen 2CV in the rear. (Securement the suspen
  10,82 €

Hinged tie bar adjustment with eye. Old version (Installed to year of construction 11/1971, fits however on all 2CV to year of construction 1990). Suitable for all Citroen 2CV, Dyane, AMI. (Securement eye for the triangle pin at the radius arm). Per piece.

Quality: 4

• Suitable for this article
• Triangle pin small, galvanizes. Suitable for Citroen 2CV front. (Securement of the suspension p
  4,42 €

Threadet pipe of large diameter, for the suspension pot. (Securement at the chassis). The Threadet pipe are supplied without nut. Suitable for Citroen AK, ACDY, AMI 6 + 8. (for the large suspension pot)

Quality: 4

• Suitable for this article
• Nut largely for threadet pipe (spring pot securement), suitable for Citroen AK, ACDY, AMI 6 + 8
  7,70 €

Nut largely for threadet pipe (spring pot securement), suitable for Citroen AK, ACDY, AMI 6 + 8. Only suitable for large suspension pot. (50mm)

Quality: 4

Rubber stop sheet metal plate at the suspension pot (for large suspension pot). Suitable for Citroen AK, AMI, ACDY. That is only the metal plate, without rubber!

Quality: 3

Rubber stop with metal plate, at the suspension pot (for large suspension pot). Suitable for Citroen Ami 6 +8, ACDY, AK400.

Quality: 4

Fixing clip for the triangle pin. (fitting for small and large triangle pins). For Citroen 2CV, Dyane, AMI, AK, AZU, ACDY.

Quality: 3

Triangle pin + spring hinged tie bar adjustment set (4 fittings), top quality. Suitable for Citroen 2CV. Consisting of: 2x triangle pin largely, 2x triangle pin small, 8x clip, 4x spring hinged tie bar adjustment from high-grade steel. 100% like original spare part. Same material. Rust protection such as original. Surface such as original, no sharp edges. Durability such as original! Better it does not go. Co-operation from Germany and the Netherlands. The triangle pins are produced from sinter metal (like original). The triangle pins must be put before the assembly, for a half hour into warm oil!

Quality: 2

Triangle pin largely, top quality. Suitable for Citroen 2CV in the rear. (Securement the suspension pot hinged tie bar at the radius arm). Measurement: 45 x 14,29mm. 100% like original spare part. Same material. Rust protection such as original. Surface such as original, no sharp edges. Durability such as original! Better it does not go. Co-operation from Germany and the Netherlands. Or. No. AM434-84A. The triangle pins are produced from sinter metal (like original). The triangle pins must be put before the assembly, for a half hour into warm oil!

Quality: 2 360°

• Suitable for this article
• Fixing clip for the triangle pin. (fitting for small and large triangle pins). For Citroen 2CV,
  0,79 €

Triangle pin largely, galvanizes. Suitable for Citroen 2CV rear. (Securement of the suspension pot hinged tie bar at the radius arm). Measurement: 45 x 14mm. Reproduction from South America.

Quality: 4

• Suitable for this article
• Fixing clip for the triangle pin. (fitting for small and large triangle pins). For Citroen 2CV,
  0,79 €

Triangle pin small, top quality. Suitable for Citroen 2CV in front. (Securement the suspension pot hinged tie bar at the radius arm). Measurement: 42 x 12,21mm. 100% like original spare part. Same material. Rust protection such as original. Surface such as original, no sharp edges. Durability such as original! Better it does not go. Co-operation from Germany and the Netherlands. Or. No. A434-84. The triangle pins are produced from sinter metal (like original). The triangle pins must be put before the assembly, for a half hour into warm oil!

Quality: 2 360°

• Suitable for this article
• Fixing clip for the triangle pin. (fitting for small and large triangle pins). For Citroen 2CV,
  0,79 €

Triangle pin set (4 fittings), top quality. Suitable for Citroen 2CV. Consisting of: 2x triangle pin largely, 2x triangle pin small, 8x clip. 100% like original spare part. Same material. Rust protection such as original. Surface such as original, no sharp edges. Durability such as original! Better it does not go. Co-operation from Germany and the Netherlands. Or. No. A434-84 + AM434-84A. The triangle pins are produced from sinter metal (like original). The triangle pins must be put before the assembly, for a half hour into warm oil!

Quality: 2

Collar suspension pot - hinged tie bar. (Seal of the hinged tie bar to the Threadet pipe). Suitable for all Citroen 2CV, AK, Dyane, AZU. (small + large suspension pot) property reproduction, optically like original! Or.Nr.: A434.286.

Quality: 3

Collar suspension pot - hinged tie bar. (Seal of the hinged tie bar to the Threadet pipe). Suitable for all Citroen 2CV, AK, Dyane, AZU. (smaller + large suspension pot). This collar is from a improved rubber silicone mixture and has on the inside small splines, so that it cannot slip from the Threadet pipe. Or. No.: A434.286.

Quality: 1 360°

Friction lining in the suspension pot (big suspension pot). Without metal plate. Material: Synthetic. The friction lining is riveted on the metal plate. Suitable for Citroen AK, ACDY, AMI, Azam6.

Quality: 4

Friction disk (plate) for the large suspension pot. About 128mm diameter. Suitable for Citroen AK, ACDY, Ami 6+8.

Quality: 4

Ricipot lubricant for the suspension pot (400ml in spray can). Suitable for Citroen 2CV, Dyane, AMI, AK, AZU, Mehari... Ricipot lubricant is supplied with a suitable cavity probe, making it very easy to apply to the suspension pot. It is based on technical castor oil and manufactured according to Citroen specifications at the time of production. Ricipot prevents creaking and squeaking of the suspension pots and prevents the risk of internal rusting of the suspension pots.

Quality: 1