Citroen-2CV / AMI6+8 / special tools for motor vehicles

44 socket thin-walled, for the drum rear (release the hub nut). Suitable for Citroen 2CV. Mounting ratchet: 3/4 inch.

Quality: 2

• Suitable for this article
• Ratchet reduction. From 3/4 inch (socket wrench) on 1/2 inch (ratchet).
  7,93 €

Kingpin thread restores M22x1 (thread down in the wheel hub). Suitable for Citroen 2CV, Dyane, Mehari, AMI.

Quality: 3

Kingpin reamer (hobby tool) (quick adjustable), for Citroen 2CV, Dyane, AMI, Mehari. Adjustment range: 17.0mm - 19.0mm. Receptacle: square. With this tool the swing arm and the bushings of the hub can be reamed to the exact size. This reamer is a "hobby tool". The quality should be sufficient for one-time use. We also have a professional tool under no. 12393 in our programme.

Quality: 1

• Suitable for this article
• Kingpin (original) for Citroen 2CV, completely with all sleeves. Per side. Suitable for all yea
  57,42 €
• Outside micrometer 0-25mm. Optimal for the actual dimension determination of kingpins.
  26,68 €

Kingpin reamer (fast adjustable), for Citroen 2CV, Dyane, AMI, Mehari. Range of adjustment: 15,5mm - 18,0mm (39/64 45/64 inch). Cutting material: HSS. Gumption length: 60mm. Mounting: Square. Professional tool. With this tools the radius arm and the hub can be reamed on the accurate measurement.

Quality: 1

• Suitable for this article
• Kingpin (original) for Citroen 2CV, completely with all sleeves. Per side. Suitable for all yea
  57,42 €
• Outside micrometer 0-25mm. Optimal for the actual dimension determination of kingpins.
  26,68 €

King Pin tool, manual pressing version . Suitable for 2CV, Dyane, Mehari, Ami. Made by Franzose. An improved reconstruction of the genuine Citroen tool 1858-T resp. MR. 630-22/14. This tool has two different pressure pieces. So you are able to press out/press in the original and the rebuilt king pins, which had different diameters/guides of the full length inner hole. This tool is able to resist a torque of 200 Newton meter. If there is no movement of the king pin until 200 Nm, you have to dismantle the complete pivot arm and have to press out the king pin with a hydraulic press. For correct use of this tool please have a look into the original Citroen workshop manual.

Quality: 1

Punch, particularly for the kingpin. Suitable for Citroen 2CV. Made in Germany

Quality: 1

32 socket for front drive shaft, workshop quality, 2cv, connection 1/2

Quality: 2

Exhaust pipe cutter, for 28 to 67mm diameter. The pipe cutter has a ratchet function. Cutting depth up to 3mm.

Quality: 3

• Suitable for this article
• Exhaust pipe cutter: Cutting wheel as replacement for pipe cutter 20940
  12,79 €

Exhaust pipe cutter: Cutting wheel as replacement for pipe cutter 20940

Quality: 3

Exhaust tubingfar tool. For diameter 29 - 44mm. Only for tubing strengths upto max. 1,5mm. Not for high-grade steel pipes suitable. The exhaust pipe must be heated before processing! The tool must be introduced completely!

Quality: 3 360°

Exhaust tubingfar tool. For diameter 38 - 64mm. Only for tubing strengths upto max. 1,5mm. Not for high-grade steel pipes suitable. The exhaust pipe must be heated before processing! The tool must be introduced completely!

Quality: 3 360°

Autoskop, for the search for abnomal vibrations or liquid leakage. Delivery with one sensing head

Quality: 3

Battery Service Screwdriver (for the caps of the battery cells). Indispensable! Finally a tool that fits and not always a too narrow screwdriver that destroys the caps. Length: approx. 100mm.

Quality: 1

Battery terminals cleaning + milling cross. Indispensable for vintage cars! Trim once, and the electrical contact is back in order.

Quality: 3

Mini Dent Puller. This mini suction puller its strong pulling power is ideal for minor car panel dents. 55mm diameter suction disc. Can be used in pairs if necessary provides strong pulling power.

Quality: 1

Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and aluminum lines. Bends up to 90°. Suitable for pipe Ø: 3/16 " (4,75mm), 1/4 " (6,35mm), 5/16 " (7,93mm), 3/8 (9.52mm).

Quality: 3

Accelerator and Brake Pedal depressor. Convenient tool for one-man operations. For depressing the brake pedal, e.g. wheel alignment jobs, checking brake lights or trailor brakes. For depressing the accelerator, e.g. setting the engine spped or measuring omissions. 1 men operation. Finely adjustable, with high-speed release function!

Quality: 3

Brakes bleeder device! Working pressure 5-8 bar, max. vacuum 60%, capacity 1L,

Quality: 3

Brake liner centering tool in front, for the drum brake. Suitable for Citroen 2CV, to year of construction 1981. AMI, Dyane, Mehari.

Quality: 3

Brake spring pliers for drum brake. 215mm long. One end grips on the brake lining, the other hooks onto the spring

Quality: 3

Brake line wrench. 10mm + 11mm. Workshop quality.

Quality: 3

• Suitable for this article
• Brake line wrench. 8mm + 9mm. Workshop quality.
  8,88 €

Brake line wrench. 8mm + 9mm. Workshop quality.

Quality: 3

• Suitable for this article
• Brake line wrench. 10mm + 11mm. Workshop quality.
  8,88 €

Rear brake drum puller. Specially made for Citroen 2CV. Made in Germany.

Quality: 3

Drum spring draw hook from HAZET. Extremely helpfully.

Quality: 2

Outside micrometer 0-25mm. Optimal for the actual dimension determination of kingpins.

Quality: 3

CO tester (exhaust tester). Digitally. Optimally for the experienced mechanician, in order to adjust the carburetor. We use it since years for our classic cars! English operating instructions are attached. For the language German, Dutch, Spanish, Italian, French can be down-load the operating instructions of our homepage.

Quality: 3 Pdf

Crimping pliers for round plugs. Suitable for the uninsulated round plugs 3mm + 4mm. Brand quality KNIPEX

Quality: 2

• Suitable for this article
• Round plug 4mm. Stuffing contents: 10x plug, 10x sleeve. With suitable rubber sleeve and color
  19,09 €
• Round plug 3mm. Stuffing contents: 10x plug, 10x sleeve. With suitable rubber sleeve and color
  19,09 €
• round pin plug 4mm, male, like original.
  0,62 €
• Round pin plug, 4mm, feminine
  0,51 €
• round pin plug 3mm, male, like original.
  1,24 €
• Round pin plug, 3mm, feminine
  1,24 €

Roundings/minute-Indicator (laser).Very easy to use: just select a level and confirm to . Ideal for engine adjustment!

Quality: 3

pressure spray gun cavity with hook and cavity nozzle, incl. pre-heating device for Mike Sander grease

Quality: 3

• Suitable for this article
• Semi-fluid grease 4kg, for preserving the cavity, Mike Sander - corrosion inhibitor !
  72,29 €
• Semi-fluid grease 750g, for preventing the cavity, Mike Sanker - corrosion inhibitor
  18,79 €
• Cavity preservation on wax basis, for cavity pistol, 1 litre.
  19,73 €
• Fertan rust converter, 1 litre, Fertan the market leader with rust-converting primer!
  42,54 €

Rivet nut assortment made of aluminium. Consisting of: 40x M3, 35x M4, 25x M5, 25x M6, 15x M8, 10x M10. Rivet nuts are ideal for creating a thread in sheet metal. A typical example is the mirror assembly on the doors or on the fenders (often the old threads are worn out or torn out). You will find the suitable riveting pliers under the number 21082.

Quality: 3

• Suitable for this article
• Rivet nut pliers for M3, M4, M6, M8. With 2 lever arms (2 hand operation) for relatively easy i
  69,32 €

Rivet nut pliers for M3, M4, M6, M8. With 2 lever arms (2 hand operation) for relatively easy insertion of rivets with optimum force transmission. You will find a suitable range of aluminium rivet nuts under our number 21083. Rivet nuts are ideally suited for creating a thread in sheet metal. A typical example is the mirror assembly on the doors or on the fenders (often the old threads are worn out or torn out).

Quality: 3

• Suitable for this article
• Rivet nut assortment made of aluminium. Consisting of: 40x M3, 35x M4, 25x M5, 25x M6, 15x M8,
  19,73 €

Lock stamp "double Chevron". Height of 7mm. Optimal for mark from sheet metal parts.

Quality: 3

Lubricating gun small, 120cc. Optimally for on the way and difficult attainable lubrication nipples!

Quality: 3

Grease gun, for lubricating grease cartridge. Hobby quality!

Quality: 4

• Suitable for this article
• Multi-purpose grease, cartridge 400g, suitable for our lubricating gun.
  6,34 €
• Molykote grease in cartouche for lubricating gun. 400g (graphite grease). Heavy duty roller bea
  8,32 €
• Lubricating grease, color red, 400g cartouche. Original one by TOTAL! Red lubricating grease wa
  7,93 €

Grease gun, for lubricating grease cartridge. Workshop quality from Liqui Moly!

Quality: 2

• Suitable for this article
• Multi-purpose grease, cartridge 400g, suitable for our lubricating gun.
  6,34 €
• Molykote grease in cartouche for lubricating gun. 400g (graphite grease). Heavy duty roller bea
  8,32 €
• Lubricating grease, color red, 400g cartouche. Original one by TOTAL! Red lubricating grease wa
  7,93 €

Universal Thread Gauge - 4pc. For individual gauges measuring pith and thread in Imperial, US and metric sizes. Identifies: bolts and spark pluga from 10 to 18mm. Range 5/16 to 3/4, 10tpi - 44tpi, metric 2,5 - 22mm. Pitch 035 - 2,5mm.

Quality: 1

Parking brakeadjust tool, for Citroen 2CV with disc brake. Thus the eccentric of the hand brake handles can be adjusted optimally.

Quality: 3

szction pump (hand pump) for eG fuel, hydraulic liquid

Quality: 3

Heli coil application M7. Length: 10,5mm (Thread repair)

Quality: 2

Heli coil application M7. Length: 14,0mm (Thread repair)

Quality: 2

Heli coil application M7. Length: 7,0mm (Thread repair)

Quality: 2

Thread Repair Kit M7x1, for repairing damaged threads. For plating threads in materials with low shearing strength 1 twist drill, 1 tap, 1 installation tool, 1 tang breaker, 25 x M7x1 coil.

Quality: 3

Helicoil repair set for M7. Consisting of: Twist drill (to M12), hand taps from HSS, mounting spindle, insertion pin breaker (to M12). In each case, 10 theaded inserts M7 in the lengths: 7,0mm, 10,5mm, 14,0mm. Original Helicoil, no reproduction.

Quality: 2

Heli coil spark plug thread repair set. For all M14 spark plugs. Contents: 1 bore + cutting tool, installation spindle. 10x heli coil insert M14x1,25x17,5. (Spark plugs with long threads). 10x heli coil insert M14x1,25x12,7. (Spark plugs with short threads, 2CV, R4).

Quality: 2

Hone segment 100x10mm (3 fittings) for engine cylinder hone 20918.

Quality: 2

Hone segment 30x4mm (2 fittings) for brake cylinder hone 20916.

Quality: 3

Hydraulic line and Brake line flaring tool for use at the vehicle! For all lines with 3,5mm, 4,5mm + 6,35mm (1/4 "). (Citroen)

Quality: 1 Pdf

• Suitable for this article
• Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and aluminum lines.
  24,40 €

Hydraulic line Brake line flaring tools for use at the vehicle (to use at the car). For all flanging! For all Citroen lines with 3,5mm, 4,5mm + 6,35mm (1/4 "). For all lines after DIN/CSAE, for flanges of the types CD, E, F, F180 in the usual quantities 4,75mm, 6mm, 8mm, 9mm and 10mm.

Quality: 1 Pdf

• Suitable for this article
• Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and aluminum lines.
  24,40 €

Brake line flaring tool, for brake and hydraulic lines. Particularly for Citroen connectors. With thrust pieces for 3,5mm + 4,5mm lines (8,0mm + 9,0mm Clinch screws).

Quality: 3 360°

• Suitable for this article
• Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and aluminum lines.
  24,40 €

Hog Rings (500 per pack) for 21048 automatic pliers (coverings). Suitable for Citroen, Peugeot, Renault. The suitable pliers have our number 21048.

Quality: 1