Citroen-2CV / AMI6+8 / heating + ventilation

2CV6, heat exchanger, left + right (1 pair). Good reproduction made of stainless steel. The heat exchangers are like the original, and also have the foam on the flaps. But the 2CV with stainless steel heat exchanger sounds slightly different (louder, more metallic). Attention: The heat exchangers fit only on the Citroen 2CV6 (Dyane, Mehari, AK, AMI8), until 1990, not suitable for 2CV4.

Quality: 3

• Suitable for this article
• 2CV6, exhaust clip 49mm, for transition manifold to heat exchanger and transition heat exchange
  2,93 €
• Screening plate at the exhaust, for the protection for the parking brake cable. Suitable for Ci
  17,76 €
• 2CV6, exhaust clip 49mm. The clip is extremely stable and from cast iron. The clip seizes comp
  11,85 €

2CV6, heat exchanger, left + right (1 pair). Good replica. The heat exchangers are like the original, and also have the foam on the flaps. The heat exchangers are black powder coated. Attention: The heat exchangers fit only on the Citroen 2CV6 (Dyane, Mehari, AK, AMI8), until 1990. Not suitable for 2CV4.

Quality: 3

• Suitable for this article
• 2CV6, exhaust clip 49mm, for transition manifold to heat exchanger and transition heat exchange
  2,93 €
• Screening plate at the exhaust, for the protection for the parking brake cable. Suitable for Ci
  17,76 €
• 2CV6, exhaust clip 49mm. The clip is extremely stable and from cast iron. The clip seizes comp
  11,85 €

2CV6, heat exchanger (heat exchanger), exhaust pipe on the left in the heat exchanger. As substitute for through-rusted pipes. Caution, it is only the pipe, not the kompette heat exchanger.

Quality: 4

• Suitable for this article
• 2CV6, exhaust clip 49mm, for transition manifold to heat exchanger and transition heat exchange
  2,93 €

2CV6, heat exchanger, exhaust pipe on the right in the heat exchanger. As substitute for through-rusted pipes. Caution, it is only the pipe, not the kompette heat exchanger.

Quality: 4

• Suitable for this article
• 2CV6, exhaust clip 49mm, for transition manifold to heat exchanger and transition heat exchange
  2,93 €

Foam material plate on the flap of the heat exchanger, per piece! For Citroen 2CV 4+6.

Quality: 3

Spring for heating clap adjustment at the heating exchanger. For Citroen 2CV6 + 2CV4.

Quality: 3

Exhaust air hose for Citroen Mehari + Ami. Diameter 80mm, length 170mm.

Quality: 3

• Suitable for this article
• Hose clamp 70 - 90mm. Suitable for exhaust air hose, for Citroen 2CV4 + 2CV6.
  1,98 €

Label for the heater adjustment (red + blue spot). Suitable for Citroen 2CV + HY.

Quality: 3

Heating air fan for the installation into the heating hose of Citroen 2CV. The hose is cut through and mounted then the fan between the heating hose ends. Optically almost invisibly. The mounting material is provided. The fan has the following dimensions: 80mm diameter, construction length 50mm.

Quality: 3

Heater cable sheet metal holder, securement of the heater cable on the heat exchanger. This sheet metal holder is for both heater cables. Suitable for Citroen 2CV.

Quality: 3

Heater cable tension force clamp (wide) on the heat exchangers, for Citroen 2CV. With this tension force clamp the two heater cables are adjusted. Significant after production from the European Union. Or.Nr. AZU 644-101

Quality: 3

Cable tie made of rubber, for 2CV/DS, like the original. Length: 270mm, breadth:12mm. Made in Germany.

Quality: 3

Cable tie made of rubber, for 2CV/DS, like the original. Length: 320mm, breadth: 12mm. Made in Germany.

Quality: 3

Clamp for attaching the heating cable to the heat exchanger. The clips are at the end of the heater cable and are clipped onto the heat exchanger. Suitable for Citroen 2CV, old version. On a 2CV6, the cables on the heater exchanger have been screwed on since 1977.

Quality: 3

Clip for the securement heater cable at the heat exchanger. Suitable for Citroen 2CV, old version. With a 2CV6, since 1977, the cable are screwed on to the heat exchanger.

Quality: 3

Clip heater cable on the left, securement on the heat exchanger. (narrow clip). Significant reproduction from the European Union, yellow galvanizes. Note: The clip has 5,0mm hole (new version). For Citroen 2CV. Or.Nr. AZ124.12

Quality: 3

Clip heater cable on the right, securement on the heat exchanger. (wide clip). Significant reproduction from the European Union, yellow galvanizes. Note: The clip has 5,0mm hole (new version). For Citroen 2CV. Or.Nr. AM14212

Quality: 3

Knob round, colour grey, screwable, for heating adjustment and air distribution, bench lock. Reproduction made of metal! Suitable for Citroen 2CV, DS, HY.

Quality: 1

Knob round, colour black, screwable, for heating adjustment and air distribution. Reproduction made of metal! Suitable for Citroen 2CV, DS, HY.

Quality: 1

Knob round, chrome plated, screwable, for heating adjustment and air distribution. Reproduction made of metal! Suitable for Citroen 2CV, DS, HY.

Quality: 1

Collars clip strap with lock (made from metal). Overall length: about 500mm. Width: 5,0mm. These universal clip straps were in former times Installed at many French car´s. So also at radiator hoses, collar drive shafts etc.

Quality: 3

Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band with raised edges. This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

Quality: 1

• Suitable for this article
• Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with raised edges.
  24,69 €

Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band with raised edges. This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

Quality: 1

• Suitable for this article
• Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with raised edges.
  24,69 €

Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band with raised edges. This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

Quality: 1

• Suitable for this article
• Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with raised edges.
  24,69 €

Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band with raised edges. This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

Quality: 1

• Suitable for this article
• Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with raised edges.
  24,69 €

Hose clamp 22-32mm, especially for radiator hose. Vintage look. Embossed band with raised edges. This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

Quality: 1

• Suitable for this article
• Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with raised edges.
  24,69 €

hose clamp for 15-20mm.

Quality: 3

hose clamp for 40-60mm.

Quality: 3

Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with raised edges.

Quality: 1

• Suitable for this article
• Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band with raised edges
  3,56 €
• Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band with raised edges
  3,62 €
• Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band with raised edges
  3,72 €
• Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band with raised edges
  3,82 €
• Hose clamp 22-32mm, especially for radiator hose. Vintage look. Embossed band with raised edges
  3,92 €
• Hose clamp 26-38mm, especially for radiator hose. Vintage look. Embossed band with raised edges
  4,17 €
• Hose clamp 32-44mm, especially for radiator hose. Vintage look. Embossed band with raised edges
  4,26 €
• Hose clamp 38-50mm, especially for radiator hose. Vintage look. Embossed band with raised edges
  4,42 €
• Hose clamp 40-56mm, especially for radiator hose. Vintage look. Embossed band with raised edges
  4,71 €
• Hose clamp 57-75mm, especially for radiator hose. Vintage look. Embossed band with raised edges
  5,40 €