Citroen-2CV / AMI6+8 / screws + nuts

Fender rear, screw from high-grade steel (round head M5x16).

Quality: 1

Soft top hood, push-button completely, for riveting. Universal fitting.

Quality: 2

Sheet metal nut, 2,9. For sheet metal driving screw with 2,9mm core diameter. Dimension: 12.0 x 11,0mm.

Quality: 3

Sheet metal nut, 3,5. For sheet metal driving screw with 3,5mm core diameter. Dimension: 16,50 x 11,0mm.

Quality: 3

• Suitable for this article
• Soft top hood, sheet metal driving screw from high-grade steel. For the push-button lower part
  0,42 €
• Sheet metal driving screw with large head, black galvanizes. Measurements: 3,5 x 16mm.
  0,45 €

Sheet metal nut, 3,9. For sheet metal driving screw with 3,9mm core diameter. Dimension: 16,50 x 11,30mm.

Quality: 3

Sheet metal nut, 4,2. For sheet metal driving screw with 4,2mm core diameter. Dimension: 16,50 x 11,20mm.

Quality: 3

• Suitable for this article
• Sheet metal driving screw with large head, black galvanizes. Measurements: 4.2 x 19 mm.
  0,38 €

Sheet metal nut, 4,8. For sheet metal driving screw with 4,8mm core diameter. Dimension: 16,50 x 14,50mm.

Quality: 3

• Suitable for this article
• Rosette nickel plated. For 5mm screw. Outside diameter: 13mm. Height: 3,0mm. These rosettes we
  0,94 €
• Screw cross lens head (4.8x22) in stainless steel. Per piece.
  0,38 €
• Screw cross lens head (4.8x32) in stainless steel. Per piece.
  0,39 €
• Screw chrome, for mounting the indicators. Suitable for Citroen DS, starting from year of const
  0,56 €

Clamp made of metal, for up to 10mm lines. (Cable harness, gasoline line, water hose etc.). The clip can be inserted on each sheet metal seam up to the maximum strength by 2mm.

Quality: 3

Sheet metal driving screw with large head, black galvanizes. Measurements: 3,5 x 16mm.

Quality: 3

Sheet metal driving screw with large head, black galvanizes. Measurements: 4.2 x 19 mm.

Quality: 3

Spring Assortment, 200 pcs. Compression and extension springs, popular sizes

Quality: 3

R-Clip Assortment, 150 pcs. 6 popular sizes, 2.4 x 31 mm, 2.0 x 33 mm, 2.0 x 40 mm, 2.8 x 42 mm, 3.5 x 45 mm, 4.0 x 75 mm.

Quality: 3

Screw gauge metric + Whitworth. Angle of pressure 60° with 24 upward gradients 0,25-6mm. Angle of pressure 55° with upward gradients 4-62 gear on 1 ".

Quality: 3

Universal Thread Gauge - 4pc. For individual gauges measuring pith and thread in Imperial, US and metric sizes. Identifies: bolts and spark pluga from 10 to 18mm. Range 5/16 to 3/4, 10tpi - 44tpi, metric 2,5 - 22mm. Pitch 035 - 2,5mm.

Quality: 1

Heli coil application M7. Length: 10,5mm (Thread repair)

Quality: 2

Heli coil application M7. Length: 14,0mm (Thread repair)

Quality: 2

Heli coil application M7. Length: 7,0mm (Thread repair)

Quality: 2

Helicoil repair set for M7. Consisting of: Twist drill (to M12), hand taps from HSS, mounting spindle, insertion pin breaker (to M12). In each case, 10 theaded inserts M7 in the lengths: 7,0mm, 10,5mm, 14,0mm. Original Helicoil, no reproduction.

Quality: 2

Roll Pin Assortment, 450 pcs. Diameter from 2 > 10mm, lenght 5>50mm.

Quality: 3

Cable tie assortment (black). 75 pieces. Content: 25 cable ties 3.0 x 100 mm, 25 cable ties 3.0 x 120 mm, 25 cable ties 3.6 x 200 mm

Quality: 3

Box nut M5 (casing nut). External dimension: 13.5 x 13,5mm. Suitable for Citroen DS, 2CV, HY ......

Quality: 3

Castle nut, M14X1,5. Low version

Quality: 3

Copper sealing ring, diameter inside 14,3mm. (14,3x19x1,5)

Quality: 3

Copper seal type A, (full copper). 16x22x1,5mm.

Quality: 3

LOCTITE 243, liquid screw protection, middle sttrong, indispensable for all car work

Quality: 2

Loxx, snap fastener, upper part, on textile. Very simple and clever system, german invention from 1928. It works like a trailer coupling. The upper part catches a small ball and the system is locked. To open just pull up the upper part. No more broken fingernails! Just perfect.

Quality: 2

Loxx lower part for sheet metal. Sheet metal driving thread 4.2 x 16mm.

Quality: 2

• Suitable for this article
• Loxx, lower part for textiles. Original one, no reproduction.
  1,69 €

Loxx, lower part for textiles. Original one, no reproduction.

Quality: 2

• Suitable for this article
• Loxx lower part for sheet metal. Sheet metal driving thread 4.2 x 16mm.
  1,46 €

spring washer M10, galvanized

Quality: 3

Nut M10, galvanized

Quality: 3

Nut M10x1. Flat design. For fastening brake hoses.

Quality: 3

Srew M10x70

Quality: 3

Spring washer M12

Quality: 1

Washer Stainless steel M12

Quality: 3

Nut M12x1,5. Flat design. For fastening brake hoses.

Quality: 3

Nut M3 galvanized (chrome trim ventilation shutter)

Quality: 3

Nut M4 galvanized

Quality: 3

Screrw M4x10 / machine screw

Quality: 3

screw M4x12, galvanized (machine screw)

Quality: 3

M4x6/ screw round head, per piece!

Quality: 3

M5, cover for bolt heath

Quality: 3

M5 weld nut (spot weld nut), like original! Suitable for Ctroen 2CV, DS, HY

Quality: 3

Nut M5, galvanized

Quality: 3

Washer corrugated M5x12 (French name: Striees). Content: 60 units. These grooved washers were original Installed at French vehicles!

Quality: 2

Washer corrugated M5x16 (French name: Striees). Content: 60 units. These grooved washers were original Installed at French vehicles!

Quality: 2

Washer set original Citroen "Strie". Contents: M5x12, M5x16, M6x14, M6x18, M7x14, M7x18, M8x18, M8x22. Range with 480 units, for all Citroen, Peugeot and Renault.

Quality: 1

M5x10, screw galvanizes.

Quality: 3

M5x16/screw from high-grade steel (1 piece)

Quality: 1

Screw M5x16, galvanized

Quality: 3

M5x16, screw galvanizes, with Chevrons. Thread pitch: ISO 0.80 (Citroen starting from year of construction 04/1970). For the original-faithful restoration! Made in Europe.

Quality: 3