Citroen-2CV / ACDY / wheel bearings

Hub nut rear, 44ties. Suitable for Citroen 2CV, all years of construction. Reproduction, poor quality. Tightening torque: 343-392Nm.

Quality: 4

• Suitable for this article
• Grease cap rear, synthetic, for Citroen 2CV + DS. Cover for the wheel bearing, rear in the drum
  2,93 €
• 44 socket thin-walled, for the drum rear (release the hub nut). Suitable for Citroen 2CV. Mount
  22,71 €
• Ratchet reduction. From 3/4 inch (socket wrench) on 1/2 inch (ratchet).
  7,93 €
• Combination tool for wheel bearing nut and 44mm rear hub nut. Combination tool. Semi profession
  38,58 €

Rear axle nut, 44 mm wrench size. Suitable for Citroen 2CV, all years of construction. Tightening torque: 343-392Nm. Original Citroen! The better choice.

Quality: 2

• Suitable for this article
• Grease cap rear, synthetic, for Citroen 2CV + DS. Cover for the wheel bearing, rear in the drum
  2,93 €
• 44 socket thin-walled, for the drum rear (release the hub nut). Suitable for Citroen 2CV. Mount
  22,71 €
• Ratchet reduction. From 3/4 inch (socket wrench) on 1/2 inch (ratchet).
  7,93 €
• Combination tool for wheel bearing nut and 44mm rear hub nut. Combination tool. Semi profession
  38,58 €

Lubricating grease, color red, 400g cartouche. Original one by TOTAL! Red lubricating grease was particularly developed for high-speed bearings (wheel bearings). Extremely acid-resistant! (Seawaters)

Quality: 1

Multi-purpose grease, cartridge 400g, suitable for our lubricating gun.

Quality: 2

• Suitable for this article
• Grease gun, for lubricating grease cartridge. Hobby quality!
  23,71 €
• Lubricating gun small, 120cc. Optimally for on the way and difficult attainable lubrication nip
  18,74 €

Molybdenum universal grease in tube, 230g. High performance rolling bearing grease for lubricating wheel bearings, cardan joints etc.

Quality: 3

• Suitable for this article
• Lubricating gun small, 120cc. Optimally for on the way and difficult attainable lubrication nip
  18,74 €

Grease cap rear, out of sheet metal. Suitable for all Citroen 2CV + Citroen DS. Cover for the wheel bearing, rear in the drum.

Quality: 4

• Suitable for this article
• Rear axle nut, 44 mm wrench size. Suitable for Citroen 2CV, all years of construction. Tighteni
  6,89 €

Grease cap rear, synthetic, for Citroen 2CV + DS. Cover for the wheel bearing, rear in the drum Caution: ring nuts may have different inside diameters. Maybe the grease cap should be wrapped with insulating tape to get it fixed in the ring nut!

Quality: 3

• Suitable for this article
• Rear axle nut, 44 mm wrench size. Suitable for Citroen 2CV, all years of construction. Tighteni
  6,89 €

Wheel bearing suitable for Citroen AK, ACDY, AMI 6+8, AZAM 6. Not suitable for the normal Citroen 2CV. Manufacturer "Der Franzose". Measurement: 36 x 76 x 29mm. The wheel bearing fits for the front axle + rear axle.

Quality: 3

• Suitable for this article
• Wheel bearing shaft seal for Citroen 2CV, Ak, ACDY, AMI. The shaft seals are identically constr
  2,43 €

Wheel bearing set for Citroen AK/ACDY/AMI 6+8, in front. (inclusive shaft seals). Suitable for all years of construction. Original SNR/IBR. Dimension: 36 x 76 x 29mm. Good substitute product to SKF bearings. IBR is a spanish producer, who was Citroën official supplier. Made in Spain

Quality: 2

Wheel bearing set rear, suitable for Citroen AK, ACDY, AMi 6+8, AZAM 6. Not suitable for normal 2CV! Measurements: 36 x 76 x 29mm. Good reproduction from the European Union. Original manufacturer SNR.

Quality: 2

• Suitable for this article
• Rear axle nut, 44 mm wrench size. Suitable for Citroen 2CV, all years of construction. Tighteni
  6,89 €

Wheel bearing shaft seal for Citroen 2CV, Ak, ACDY, AMI. The shaft seals are identically constructed at the front axle and at the rear axle. Youi need 2 shaft seals per wheel bearings at the front axle and 1 shaft seal per bearing at the rear axle. Dimension: 45 x 62 x 8mm. Made in Germany.

Quality: 3

Ring nut for the wheel bearing largely, suitable for Citroen AK, ACDY, AMI 6+8, AZAM 6. The ring nut does not fit for a normal Citroen 2CV! Measurement: M78 x 1,5. Tightening torque: 343-392Nm.

Quality: 3

• Suitable for this article
• Wheel bearing shaft seal for Citroen 2CV, Ak, ACDY, AMI. The shaft seals are identically constr
  2,43 €