Citroen-2CV / ACDY / brake line prefabricated + hydraulic lines

Brake line + fuel line fixture. Mounted laterally at the chassis. Suitable for Citroen 2CV4 + 2CV6. (Vehicles with light brake lines. 3,75mm). Reproduction, optically and technically like original.

Quality: 3

Brake line + hydraulic line connector, for lines with 3,50mm diameters. Suitable for Citroen 2CV, Citroen DS, Citroen HY etc. The connector operates with cutting rings. No Brake line flaring tool are required! There are pipes with 3,50mm + 3,75mm diameter. For 3,75mm you require the connector 32349!

Quality: 3

• Suitable for this article
• Brake + hydraulic line. Diameter: 3,5mm. Length: 7,62m. Material: Kunifer (copper - nickel allo
  49,48 €
• Brake + hydraulic line. Diameter: 3,50mm. Length: 25m. Material: Kunifer (copper - nickel alloy
  161,54 €

Brake line from high-grade steel. Connection from the right brake caliper to the left brake caliper. Brake system LHM. Suitable for Citroen 2CV6 starting from year of construction 1981 (vehicles with disc brake in front). Corresponds to DIN EN 10217 /05.05, TCI

Quality: 1 Pdf

Brake line from high-grade steel. Connection of that 3 path link to the left rear wheel brake cylinder (spiral in the rear axle tube). Brake system LHM. Suitable for Citroen 2CV6 starting from year of construction 1981 (vehicles with disc brake in front). Corresponds to DIN EN 10217 /05.05, TCI

Quality: 1 Pdf

Brake line from high-grade steel. Connection of that 3 path link to the right rear wheel brake cylinder (spiral in the rear axle tube). Brake system LHM. Suitable for Citroen 2CV6 starting from year of construction 1981 (vehicles with disc brake in front). Corresponds to DIN EN 10217 /05.05, TCI

Quality: 1 Pdf

Brake lines + hydraulic line connectors, for lines with 3.5 - 3.75 mm diameter. Thread on both sides: M8x1.25. Optimal if 2 lines are to be connected to each other.

Quality: 3

• Suitable for this article
• Brake line seal + hydraulic line seal (socket) red. For DOT brake fluid + LHS (red hydraulic fl
  0,49 €
• Clinch screw, for 3,5mm - 3,75mm braking or hydraulic line. Thread: M8. Suitable wrench likewis
  0,75 €

Brake pipe seal + hydraulic line seal (socket) green. For LHM (green hydraulic fluid), 3,75mm line (connector 8mm). Suitable for Citroen 2CV6 (for the brake hoses), Installed starting from year of construction 1981 (2CV with disc brake). Citroen DS, GS, CX, etc. for hydraulic lines.

Quality: 3

Brake line seal + hydraulic line seal (socket) red. For DOT brake fluid + LHS (red hydraulic fluid), 3,75mm line (connector 8mm). Suitable for Citroen 2CV (for the brake hoses), Installed to year of construction 1981 (2CV with drum brake in front). Citroen DS to year of construction 1967, for the hydraulic lines.

Quality: 3

Brake tube protection (scoring protector)rear axle, for Citroen 2CV4+6. For vehicles with rear brake tubes on rear axle. This protector has to be put around the brake tube on rear axle in front of 3 path link.

Quality: 3

Brake hose seal + hydraulic line seal (socket) green. For LHM (hydraulic fluid green), 4,5mm line (connector 9mm). Suitable for Citroen DS, HY with hydraulics, GS, CX etc.

Quality: 3