Citroen-2CV / ACDY / rear body components

ACDY, Rear end panel cross-beam completely for Citroen ACDY. The cross-beam has 2 holes for the bumper. Made in Europe.

Quality: 4

• Suitable for this article
• AK/AZU/ACDY, closing sheet from downside, for the rear end cross-beam (our number 15380, 15398,
  14,86 €

ACDY, cross-beam crosswise rear, under the box body for Citroen ACDY.

Quality: 3

ACDY, cross-beam crosswise in front - center, under the box body for Citroen ACDY. (Height of spare wheel fixture). 1 version, length about 124cm.

Quality: 3

ACDY, cross-beam crosswise in front, under the box body (direct behind the driver's cabin) for Citroen ACDY

Quality: 3

ACDY, interior fender completely (inclusive rear axle stop + bulkhead) at the rear left in the box body. Suitable for Citroen Acadyane. 1617mm lengthens. Made in Europe.

Quality: 3

ACDY, interior fender completely (inclusive rear axle stop + bulkhead) at the rear right in the box body. Suitable for Citroen Acadyane. Length=1617mm. Made in Europe.

Quality: 3

ACDY, baggage compartment floor completely for box body. For Citroen ACDY.

Quality: 3

ACDY, backwall at the rear left in the box body. From top to bottom. Suitable for Citroen ACDY. Manufactured in manual work in the European Union.

Quality: 3

ACDY, backwall at the rear right in the box body. From top to bottom. Suitable for Citroen ACDY. Manufactured in manual work in the European Union.

Quality: 3

ACDY, sheet metal between spare wheel + wheel housing on the right. Suitable for Citroen Acadyane. Made in Europe.

Quality: 3

ACDY, front panel sheet metal (height of B-support) for left wheel house. For Citroen Acadyane. Made in Europe.

Quality: 3

ACDY, front panel sheet metal (height of B-support) for right wheel house. For Citroen Acadyane. Made in Europe.

Quality: 3

AK400, interior fender at the rear right in the box body (without rear axle stop)! Suitable for Citroen AK400. Length=1617mm. Or.Nr. AK821-5C. Manufactured in manual work in the European Union.

Quality: 3

• Suitable for this article
• AK 400, rear axle stop repair sheet metal, for Citroen AK400. Made in Europe.
  79,23 €
• ACDY, rear axle stop repair sheet metal, for Citroen ACDY.
  78,24 €

AK400, repair sheet metal on the left, for the tail lamps. Suitable for Citroen AK400. Made in Europe.

Quality: 4

AK400, repair sheet metal on the right, for the tail lamps. Suitable for Citroen AK400. Made in Europe.

Quality: 4

AK400, square profile (square cross-beam) on the left, centrically, lengthwise over the box body. Suitable for Citroen AK400. Made in Europe.

Quality: 4

AK400/ACDY, rear end panel for Citroen AK400 + ACDY. It is only the rear sheet metal of the cross-beam, not the whole cross-beam. 4 holes for the bumper securement. Made in Europe.

Quality: 3

AK400/ACDY, edge of baggage compartment floor rear (the final 10cm). Suitable for Citroen AK400 + ACDY. Made in Europe.

Quality: 4

AK400/ACDY, square profile (square cross-beam) on the right, centrically, lengthwise over the box body. Suitable for Citroen AK400 + ACDY. Made in Europe.

Quality: 4

AK400/ACDY/AZU/HY, spare wheel hood, spring for the latching pin.

Quality: 4

AK400/AZU, backwall centrically over the tail gates, in the box body. Suitable for Citroen AK400 + AZU. The sheet metal does not have a license plate mounting! Very good processing. Inclusive sheet metal brackets for the cable harness, rainwater gutter, cross-beam etc. Made by "Der Franzose". Made in Europe.

Quality: 3

AK/ACDY, spare wheel hood for Cotroen AK400 + ACDY. Large corrugated sheet, reproduction. Made in Europe.

Quality: 3

AK/ACDY, tank panel for Citroen AK400 + ACDY. Large corrugated sheet, reproduction. Made in Europe.

Quality: 3

AK/AZU/ACDY, closing sheet from downside, for the rear end cross-beam (our number 15380, 15398, 15445). Suitable for Citroen AZU, AK, ACDY. Or. No. AZU832-5

Quality: 3

AK/AZU/ACDY/HY, spare wheel hood, actuation handle for the latching pin.

Quality: 4

AK/AZU/ACDY/HY, latching pins for the spare wheel hood.

Quality: 4

• Suitable for this article
• AK400/ACDY/AZU/HY, spare wheel hood, spring for the latching pin.
  4,91 €
• AK/AZU/ACDY/HY, spare wheel hood, actuation handle for the latching pin.
  9,82 €