Citroen-2CV / ACDY / rear wheel brake without hydraulic parts

Hub nut rear, 44ties. Suitable for Citroen 2CV, all years of construction. Reproduction, poor quality. Tightening torque: 343-392Nm.

Quality: 4

• Suitable for this article
• Grease cap rear, synthetic, for Citroen 2CV + DS. Cover for the wheel bearing, rear in the drum
  2,93 €
• 44 socket thin-walled, for the drum rear (release the hub nut). Suitable for Citroen 2CV. Mount
  22,71 €
• Ratchet reduction. From 3/4 inch (socket wrench) on 1/2 inch (ratchet).
  7,93 €
• Combination tool for wheel bearing nut and 44mm rear hub nut. Combination tool. Semi profession
  38,58 €

Rear axle nut, 44 mm wrench size. Suitable for Citroen 2CV, all years of construction. Tightening torque: 343-392Nm. Original Citroen! The better choice.

Quality: 2

• Suitable for this article
• Grease cap rear, synthetic, for Citroen 2CV + DS. Cover for the wheel bearing, rear in the drum
  2,93 €
• 44 socket thin-walled, for the drum rear (release the hub nut). Suitable for Citroen 2CV. Mount
  22,71 €
• Ratchet reduction. From 3/4 inch (socket wrench) on 1/2 inch (ratchet).
  7,93 €
• Combination tool for wheel bearing nut and 44mm rear hub nut. Combination tool. Semi profession
  38,58 €

Spring laterally, for the brake shoes (spring for locking pin brake shoes). Suitable for Citroen 2CV + Citroen DS. Or. Nr. A 5185

Quality: 3

• Suitable for this article
• Spring plate laterally, for the pressure spring at the brake shoes. Suitable for Citroen 2CV +
  1,29 €

Spring plate laterally, for the pressure spring at the brake shoes. Suitable for Citroen 2CV + Citroen DS. Or.Nr. ZC9438157U

Quality: 3

• Suitable for this article
• Spring laterally, for the brake shoes (spring for locking pin brake shoes). Suitable for Citroe
  1,83 €

Brake shoes supporting pin rear (mounts in the anchor plate). Suitable for Citroen 2CV. Or.Nr.A45187

Quality: 3

Brake shoes rear, safety sheet for the nut of the lower eccentric cams. Suitable for Citroen 2CV. Made in Germany.

Quality: 3

Rear brake shoes. Suitable for Citroen 2CV, Dyane, AK, ACDY, AMI. Reproduction from Europe. Used until year of construction 1990. On vehicles before year of construction 07/1968 the brake shoes were pressed back by springs. These vehicles must be converted to the spring clip (which can be done without any problems, our item number 13072). Without this conversion, operational safety is not guaranteed (year of manufacture 1948 to 07/1968).

Quality: 4

• Suitable for this article
• Rear axle nut, 44 mm wrench size. Suitable for Citroen 2CV, all years of construction. Tighteni
  6,89 €
• Grease cap rear, out of sheet metal. Suitable for all Citroen 2CV + Citroen DS. Cover for the w
  4,71 €
• Brake centering tool, for the rear drum. Suitable for Citroen 2CV, Dyane + Mehari.
  44,53 €
• Centering cam for the brake shoe rear. Suitable for Citroen 2CV. Diameter of the cam: 20mm. Bor
  3,63 €
• Brake shoes mounting set rear, suitable for Citroen 2CV. Scope of delivery: 4x locking pin with
  15,72 €

Rear brake shoes. Suitable for Citroen 2CV, Dyane, AK, ACDY, AMI. Original manufacturer quality. Made in Spain, Italy, fitted up to 1990. On vehicles built before 07/1968 the brake shoes were pushed back by springs. These vehicles must be converted to the spring clip (which can be done without any problems, our item number 13072). Without this conversion, operational safety is not guaranteed (year of manufacture 1948 to 07/1968).

Quality: 2

• Suitable for this article
• Rear axle nut, 44 mm wrench size. Suitable for Citroen 2CV, all years of construction. Tighteni
  6,89 €
• Grease cap rear, out of sheet metal. Suitable for all Citroen 2CV + Citroen DS. Cover for the w
  4,71 €
• Brake centering tool, for the rear drum. Suitable for Citroen 2CV, Dyane + Mehari.
  44,53 €
• Centering cam for the brake shoe rear. Suitable for Citroen 2CV. Diameter of the cam: 20mm. Bor
  3,63 €
• Brake shoes mounting set rear, suitable for Citroen 2CV. Scope of delivery: 4x locking pin with
  15,72 €
• Copper paste 100gr.
  9,82 €

Brake shoes mounting set rear, suitable for Citroen 2CV. Scope of delivery: 4x locking pin with spring + plate, 2x safety sheet for eccentric, 2x spring bow for the brake shoes.

Quality: 3

Locking pin brake shoe (pin by the anchor plate), suitable for rear (all 2CV) + in front (2CV with drum brake in front). Also suitable for Citroen DS (drum brake rear). 39mm overall length. Or. No. A451-83

Quality: 3

Axle on the anchor plate, for the mounting from the lower eccentrics of the brake liners. Suitable for Citroen 2CV. Or.Nr.: AZ 451 202A

Quality: 3

• Suitable for this article
• Centering cam for the brake shoe rear. Suitable for Citroen 2CV. Diameter of the cam: 20mm. Bor
  3,63 €
• Brake shoes mounting set rear, suitable for Citroen 2CV. Scope of delivery: 4x locking pin with
  15,72 €
• Brake shoes rear, safety sheet for the nut of the lower eccentric cams. Suitable for Citroen 2C
  3,13 €
• Nut M7, galvanized
  0,18 €

Brake shoes adjustment cam above. Suitable for Citroen 2CV + Citroen DS. Only the adjustment cam is supplied (without axle). Made in Germany.

Quality: 3

• Suitable for this article
• Brake shoes centering cam axle, suitable for Citroen 2CV + Citroen DS. For all rear drums at 2C
  5,86 €
• Brake shoes centering cam axle distance ring (Installed between centering cam and anchor plate)
  3,87 €
• Brake shoes centering cam axle washer, suitable for Citroen 2CV. (Installed between centering c
  1,88 €
• Brake shoes centering cam axle in front. Suitable for Citroen 2CV, with front drum brake. Overa
  4,91 €

Brake shoes centering cam axle, suitable for Citroen 2CV + Citroen DS. For all rear drums at 2CV and DS. Overall length 24mm. Note: the axle must be shortened for Citroen DS a little bit. This axle has a small screw, in order to simplify mounting.

Quality: 1 360°

• Suitable for this article
• Brake shoes centering cam axle distance ring (Installed between centering cam and anchor plate)
  3,87 €
• Brake shoes centering cam axle washer, suitable for Citroen 2CV. (Installed between centering c
  1,88 €
• Brake shoes adjustment cam above. Suitable for Citroen 2CV + Citroen DS. Only the adjustment ca
  2,77 €

Brake shoes centering cam axle distance ring (Installed between centering cam and anchor plate). Suitable for all Citroen 2CV + Citroen DS.

Quality: 3

• Suitable for this article
• Brake shoes centering cam axle, suitable for Citroen 2CV + Citroen DS. For all rear drums at 2C
  5,86 €
• Brake shoes centering cam axle washer, suitable for Citroen 2CV. (Installed between centering c
  1,88 €
• Brake shoes adjustment cam above. Suitable for Citroen 2CV + Citroen DS. Only the adjustment ca
  2,77 €
• Brake shoes centering cam axle in front. Suitable for Citroen 2CV, with front drum brake. Overa
  4,91 €

Brake shoes centering cam axle washer, suitable for Citroen 2CV. (Installed between centering cam axle and anchor plate). Dimension: 9.5 x 27mm.

Quality: 3

• Suitable for this article
• Brake shoes centering cam axle distance ring (Installed between centering cam and anchor plate)
  3,87 €
• Brake shoes adjustment cam above. Suitable for Citroen 2CV + Citroen DS. Only the adjustment ca
  2,77 €
• Brake shoes centering cam axle in front. Suitable for Citroen 2CV, with front drum brake. Overa
  4,91 €
• Brake shoes centering cam axle, suitable for Citroen 2CV + Citroen DS. For all rear drums at 2C
  4,15 €

Brake shoes centering cam axle, suitable for Citroen 2CV + Citroen DS. For all rear drums at 2CV and DS. Overall length 34mm. Note: the axle must be shortened for Citroen DS a little bit. Reproduction.

Quality: 3

• Suitable for this article
• Brake shoes centering cam axle distance ring (Installed between centering cam and anchor plate)
  3,87 €
• Brake shoes centering cam axle washer, suitable for Citroen 2CV. (Installed between centering c
  1,88 €
• Brake shoes adjustment cam above. Suitable for Citroen 2CV + Citroen DS. Only the adjustment ca
  2,77 €

Centering cam for the brake shoe rear. Suitable for Citroen 2CV. Diameter of the cam: 20mm. Bore: 10mm. Tool mounting: 24mm. These cams can be used also for Citroen DS, the bore must be changed to 12mm!

Quality: 2

Brake spring pliers for drum brake. 215mm long. One end grips on the brake lining, the other hooks onto the spring

Quality: 3

Rear brake drum, new part. 180mm diameter, for the large wheel bearing. Suitable for Citroen AZU, AK, ACDY, AMI. The brake drum is supplied without wheel bearing.

Quality: 3

• Suitable for this article
• Wheel bearing shaft seal for Citroen 2CV, Ak, ACDY, AMI. The shaft seals are identically constr
  2,43 €
• Rear axle nut, 44 mm wrench size. Suitable for Citroen 2CV, all years of construction. Tighteni
  6,89 €
• Ring nut for the wheel bearing largely, suitable for Citroen AK, ACDY, AMI 6+8, AZAM 6. The rin
  15,82 €
• Grease cap rear, out of sheet metal. Suitable for all Citroen 2CV + Citroen DS. Cover for the w
  4,71 €
• Wheel bearing suitable for Citroen AK, ACDY, AMI 6+8, AZAM 6. Not suitable for the normal Citro
  31,23 €

Rear brake drum puller. Specially made for Citroen 2CV. Made in Germany.

Quality: 3

Grease cap rear, out of sheet metal. Suitable for all Citroen 2CV + Citroen DS. Cover for the wheel bearing, rear in the drum.

Quality: 4

• Suitable for this article
• Rear axle nut, 44 mm wrench size. Suitable for Citroen 2CV, all years of construction. Tighteni
  6,89 €

Grease cap rear, synthetic, for Citroen 2CV + DS. Cover for the wheel bearing, rear in the drum Caution: ring nuts may have different inside diameters. Maybe the grease cap should be wrapped with insulating tape to get it fixed in the ring nut!

Quality: 3

• Suitable for this article
• Rear axle nut, 44 mm wrench size. Suitable for Citroen 2CV, all years of construction. Tighteni
  6,89 €

Rear wheel hub: Threating die for recutting the thread of the rear wheel hub - brake drum (where the 44 nut is mounted). Suitable for all Citroen 2CV, Dyane, AK, AZU, ACDY, AMI 6+8, Mehari. Very good workshop quality!

Quality: 3

• Suitable for this article
• Rear wheel hub: die holder (winch) for recutting the thread of the rear wheel hub - brake drum.
  34,61 €

Rear wheel hub: die holder (winch) for recutting the thread of the rear wheel hub - brake drum. Very good workshop quality!

Quality: 3

• Suitable for this article
• Rear wheel hub: Threating die for recutting the thread of the rear wheel hub - brake drum (wher
  79,23 €