Citroen-2CV / Dyane / oil feed + oil cooling + oil filter

Rubber hose between air filter and oil filler neck, for 2CV. Inside diameter: ca 17-19mm, length: ca 280mm

Quality: 3

• Suitable for this article
• Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band with raised edges
  3,82 €

Inspection kit for Citroen 2CV6. Consisting of: 1x oil filter + seal, 1x V-belt, 2x valve cover gasket, 1x air cleaner element, 1x set of ignition cables silicone, 1x condenser, 1x ignition contact, 2x spark plug.

Quality: 3

• Suitable for this article
• Engine oil 20W50 HTX von TOTAL/elf (2 liters tin can). Special oil for vintage cars, starting f
  24,69 €
• Engine oil HTX 20W-50, from TOTAL/elf. Special oil for classic cars with petrol engine from 195
  52,46 €
• Engine oil Castrol Classic 20W50, filled up in a beautiful sheet metal can. Special oil for cla
  58,41 €
• Spark Indicator. This non-contact spark tester will test for the presence of power in spark plu
  17,76 €

Copper sealing ring, diameter inside 14,3mm. (14,3x19x1,5)

Quality: 3

Oil drain screw magnetically, suitable for Citroen 2CV, HY, DS, 11CV (with oil pan out of sheet metal). Interior square. The suitable tool has our number 20221. Or. No. A1321M, thread M16x1,5x20

Quality: 3

• Suitable for this article
• Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw, mea
  0,48 €
• Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of the original oil
  31,14 €
• Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €
• Special tool for the oil drain screw. Square 8 + 10mm. Suitable for Peugeot + Renault.
  10,81 €

Oil drain screw (engine + gearbox) suitable for Citroen 2CV, DS, HY, GS. Thread M16.

Quality: 4

• Suitable for this article
• Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw, mea
  0,48 €
• Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of the original oil
  31,14 €
• Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €

Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of the original oil drain screw. Simply remove protecting cap - tighten hose - then the valve opens. Protecting cap mount - valve closed. Everything without tool. No dirty and burned hands. No oil on the floor. 10637 is a neccesary item. And only 1 time mounting. That preserves the thread in the oil pan (those are often no longer supplyable). Completely manufactured in Germany! The thread M16 x 1.5 was Installed in: Citroen 2CV, DS, HY, 11CV, GS. Nearly all classical Peugeot (403, 404, 504, 304, 204)

Quality: 1 360°

• Suitable for this article
• Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw, mea
  0,48 €
• Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €

Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.

Quality: 1

Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw, measure: 16,3x22x2mm. Version C, curved with a seal inside. (PTFE)

Quality: 3

Oil pressure switch for Citroen 2CV starting from year of construction 1965. Response pressure 0,50 - 0,60. Thread M12 x 1,50. Electrical connection: Flat plug 6,35mm.

Quality: 3 360°

Oil pressure switch for Citroen 2CV6, Installed starting from year of construction 1965. Response pressure 0.50 bar. Thread M12 x 1,50. Electrical connection: Round plug 4mm.

Quality: 3 360°

Oil pressure valve - ball for Citroen 2CV6. Installed starting from year of construction 1973. Per piece.

Quality: 3

Oil pressure valve repair set for Citroen 2CV6. Installed starting from year of construction 1973. Consisting of spring, ball, ball fixture, slip piece (11,24mm diameter, 16mm long, 1 Version). Or. No. 1A 5411408C

Quality: 3

Oil pressure valve repair set for Citroen 2CV6. Installed starting from year of construction 1971. Consisting of spring, ball, ball fixture, slip piece (11,40mm diameter, 16mm long, 2 version). Or. No. 1A 5411409N

Quality: 3

Oil pressure valve repair set for Citroen 2CV6. Installed starting from year of construction 1973. Consisting of spring, ball, ball fixture, slip piece (11,74mm diameter, 16mm long). Or. No. 75508466

Quality: 3

Oil filler neck rubber cap, suitable for Citroen 2CV from 03/1963 to 1970. Reproduction. Or.Nr.: AZ17199

Quality: 4

M7 x 25 screw. For the securement oil filler neck on the engine block. Suitable for Citroen 2CV6.

Quality: 3

Rubber, between oil filler neck and engine oil dipstick. Suitable for Citroen 2CV4 + 2CV6.

Quality: 3

Oil filler neck seal down. (Connector on the engine block). Suitable for Citroen 2CV4+6. center hole diameter about 28,5mm. Connector center to center, about 49mm

Quality: 3

Oil filler neck, suitable for Citroen 2CV6, Dyane 6, Mehari. (includes crankcase ventilation). Made by "Franzose/CiPeRe" in Europe. Good quality.

Quality: 3 360°

• Suitable for this article
• Oil filler neck seal down. (Connector on the engine block). Suitable for Citroen 2CV4+6. center
  0,67 €
• Rubber, between oil filler neck and engine oil dipstick. Suitable for Citroen 2CV4 + 2CV6.
  2,24 €
• M7 x 25 screw. For the securement oil filler neck on the engine block. Suitable for Citroen 2CV
  0,50 €

Oil filter for Citroen 2CV. Original or brand supplier (Valeo or Mecafilter-Purflux). (No replica). Suitable for Citroen 2CV + Visa 652, from model year 09/1971 on

Quality: 2 Video

• Suitable for this article
• Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw, mea
  0,48 €
• Engine oil HTX 20W-50, from TOTAL/elf. Special oil for classic cars with petrol engine from 195
  52,46 €

Oil filter for Citroen 2CV. Reproduction. Suitable for Citroen 2CV + Visa 652, starting from year of construction 09/1971.

Quality: 4 360°

• Suitable for this article
• Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw, mea
  0,48 €
• Engine oil HTX 20W-50, from TOTAL/elf. Special oil for classic cars with petrol engine from 195
  52,46 €

Oil filter largely, for oil filter adapter 2CV. (For item 10006 = summer cartridge).

Quality: 2

• Suitable for this article
• Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw, mea
  0,48 €

Oil filter small, for oil filter adapter 2CV. (For item 10006 = winter cartridge).

Quality: 2

• Suitable for this article
• Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw, mea
  0,48 €

Oil filter adapter screw for Citroen 2CV. For replacement to use of a larger oil filter in the summer and a small oil filter in the winter. Scope of delivery: 1x adapter screw, 1x oil filter largely, 1x oil filter small.

Quality: 1 Pdf

• Suitable for this article
• Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw, mea
  0,48 €

Oil filter flange, O-ring. Suitable for Citroen 2CV, Dyane. Dimension: 34 x 37.8 x 1,9mm. Made in Germany.

Quality: 3

Oil filter tool (76mm inside diameter) , particularly for PURFLUX oil filter with 6 or 12 slots. (Citroen 2CV)

Quality: 2

Tool universal for oil filtre, fits for all oil filter, also to remove spheres!

Quality: 2

Distance bush for the connector the oil cooler at the engine block. Suitable for Citroen 2CV. Per piece.

Quality: 3

Screw (M7x100) for the oil coolers securement at the engine block. Suitable for Citroen 2CV.

Quality: 3

• Suitable for this article
• Distance bush for the connector the oil cooler at the engine block. Suitable for Citroen 2CV. P
  4,95 €

Oil cooler line seal, from rubber. Per piece! The rubber seals the oil cooler line in the connector in the engine block. Suitable for Citroen 2CV6 + 2CV4. Measurement: 10,5x13,6x12,5mm

Quality: 3

Oil cooler tool (to release the connector nut of the oil line, which goes into the engine block). Suitable for Citroen 2CV6 + 2CV4. Dyane, Mehari, AMI

Quality: 3

Oil cooler for Citroen 2CV4. Or. no.: 5440575

Quality: 4

• Suitable for this article
• Oil cooler line seal, from rubber. Per piece! The rubber seals the oil cooler line in the conne
  0,48 €
• Oil cooler tool (to release the connector nut of the oil line, which goes into the engine block
  14,86 €

Oil cooler. Suitable for Citroen 2CV6, Dyane 6, ACDY, Mehari. For engines with 602cc. Reproduction

Quality: 3 360°

• Suitable for this article
• Oil cooler line seal, from rubber. Per piece! The rubber seals the oil cooler line in the conne
  0,48 €
• Distance bush for the connector the oil cooler at the engine block. Suitable for Citroen 2CV. P
  4,95 €
• Screw (M7x100) for the oil coolers securement at the engine block. Suitable for Citroen 2CV.
  4,91 €
• Oil cooler tool (to release the connector nut of the oil line, which goes into the engine block
  14,86 €

Oil line double seal M7 for the hollow bolt. (Connector of the oil line at the cylinder head). Suitable for Citroen 2CV.

Quality: 2

• Suitable for this article
• Oil line hollow bolt 2CV6, M7, for the connector at the cylinder head. (small bore 0,4mm). Leng
  4,95 €
• Oil line hollow bolt 2CV6, M7, for connector at the engine block. (large bore 2,0mm). Significa
  4,95 €

Oil line for 2CV 4. (from the engine block to the cylinder heads). Reproduction. Or.Nr.: AM2213C

Quality: 4

• Suitable for this article
• Oil line double seal M7 for the hollow bolt. (Connector of the oil line at the cylinder head).
  0,95 €

Oil line for 2CV6, significant reproduction from the European Union. Produced from cuprous nickel! (Oil line from the engine block to the cylinder heads)

Quality: 1

• Suitable for this article
• Oil line double seal M7 for the hollow bolt. (Connector of the oil line at the cylinder head).
  0,95 €
• Oil line hollow bolt 2CV6, M7, for the connector at the cylinder head. (small bore 0,4mm). Leng
  4,95 €
• Oil line hollow bolt 2CV6, M7, for connector at the engine block. (large bore 2,0mm). Significa
  4,95 €

Oil line fixture at the engine block. Suitable for Citroen 2CV. This fixture is laterally, mounted below the ignition. Produced from high-grade steel. Made in Germany.

Quality: 3

Oil line hollow bolt (extends, for defective thread) 2CV6, M7, for the screwed joint at the cylinder head (small bore. 0,4mm). Length: 26mm. Thus a deeper thread can be bored, if the original thread is defective. High-quality reproduction from the European Union.

Quality: 3

• Suitable for this article
• Oil line double seal M7 for the hollow bolt. (Connector of the oil line at the cylinder head).
  0,95 €

Oil line hollow bolt 2CV6, M7, for the connector at the engine block (large bore 2,0mm).

Quality: 4

• Suitable for this article
• Oil line double seal M7 for the hollow bolt. (Connector of the oil line at the cylinder head).
  0,95 €

Oil line hollow bolt 2CV6, M7, for the connector at the cylinder head (small bore 0,4mm).

Quality: 4

• Suitable for this article
• Oil line double seal M7 for the hollow bolt. (Connector of the oil line at the cylinder head).
  0,95 €

Oil line hollow bolt 2CV6, M7, for the connector at the cylinder head. (small bore 0,4mm). Lenght: 18mm, like original. Significant reproduction from the European Union.

Quality: 3

• Suitable for this article
• Oil line double seal M7 for the hollow bolt. (Connector of the oil line at the cylinder head).
  0,95 €

Oil line hollow bolt 2CV6, M7, for connector at the engine block. (large bore 2,0mm). Significant reproduction from the European Union.

Quality: 3

• Suitable for this article
• Oil line double seal M7 for the hollow bolt. (Connector of the oil line at the cylinder head).
  0,95 €

Engine oil dipstick guide tube. Suitable for Citroen 2CV6 + 2CV4 (602cc + 435cc)

Quality: 3

• Suitable for this article
• Rubber, between oil filler neck and engine oil dipstick. Suitable for Citroen 2CV4 + 2CV6.
  2,24 €
• Engine oil dipstick rubber application above in the guide tube. (Fixture + guide rubber engine
  3,37 €

Engine oil dipstick rubber application above in the guide tube. (Fixture + guide rubber engine oil dipstick). Suitable for Citroen 2CV old + 2CV4. Lenght: 40mm. Or.Nr. A221-95a

Quality: 4

Engine oil dipstick, suitable for Citroen 2CV6 (602cc) + 2CV4 (435cc). Reproduction.

Quality: 3

• Suitable for this article
• Engine oil dipstick rubber application above in the guide tube. (Fixture + guide rubber engine
  3,37 €

Suction screen engine oil, mounts in the oil pan. Reproduction. Suitable for 2CV6 starting from year of construction 10/1970. Or.Nr.: AM2226A

Quality: 4 360°

Oil pump for 2CV6 (from year of construction 11/1970), inclusive Aluminum casing + cover plate. Made in Europe. The pump impeller is 10.5 mm heavily. For all 602cc engines. 2CV, Dyane, Mehari, AMI8.

Quality: 3

• Suitable for this article
• Oil pump seal (paper gasket) for Citroen 2CV6, starting from year of construction 11/1970. Moun
  1,39 €

Oil pump for 2CV6, reproduction, inclusive Aluminum casing. Pump impeller is 10.5 mm heavily. For all 602cc engines. 2CV, Dyane

Quality: 4 360°

• Suitable for this article
• Oil pump seal (paper gasket) for Citroen 2CV6, starting from year of construction 11/1970. Moun
  1,39 €

Oil pump for Citren 2CV6. Reproduction. The pump is supplied without cases. Suitable for all 602cc engines. 10,5mm heavily.

Quality: 4

• Suitable for this article
• Oil pump seal (paper gasket) for Citroen 2CV6, starting from year of construction 11/1970. Moun
  1,39 €

Oil pump seal (paper gasket) for Citroen 2CV6, starting from year of construction 11/1970. Mounting holes 5x8mm.

Quality: 3