Citroen-2CV / Dyane / crankshaft-camshaft-piston-flywheel

Piston + liner (2 pieces) for Citroen 2CV4, (425ccm). Citroen AZL, AZU, Dyane (425cc). Inclusive piston rings. 66mm bore. Liner fit measurement in the engine block 80 mm . Suitable for 16/18HP + 12 HP (the pistons are curved, this is not original for a 12HP engine). Diameter piston pin: 20,0mm.

Quality: 3 360°

• Suitable for this article
• Piston rings for Citroen 2CV4, 66mm bore. (1 set for 2 pistons). Reproduction. Measurements: 2,
  32,17 €

Piston + liners for 2CV4, 435cc, inclusive piston rings + piston pins. Bore: 68,5mm. Piston pin: 20 x 58,3mm. Piston rings: 1,75 + 2.0 + 4,0. Original supplier.

Quality: 2 360°

Piston + liner (2 pieces). Suitable for Citroen 2CV6/Club, Charleston, Special. Dyane 6, Ami 6 + 8. Engine capacity: 602ccm. Engine: M28, R6, 627. Compression 8,5:1. Inclusive Piston rings. Piston pin: 20 x 63,5mm. High-quality reproduction from the European Union.

Quality: 2

• Suitable for this article
• 2CV6, 602ccm, engine gasket set inclusive. Shaft seals and ventil stem sealing. Suitable for Ci
  28,66 €

Piston + liner (2 pieces). Suitable for Citroen 2CV6/Club, Charleston, Special. Dyane 6, Ami 6 + 8. Engine capacity: 602ccm. Engine: M28, R6, 627. Compression 9:1 (32HP). Inclusive Piston rings. Piston pin: 20 x 63,5mm. High-quality reproduction from the European Union.

Quality: 2

• Suitable for this article
• Piston rings, for 2 pistons, original, 602cc engine as from 1976. Measure: 1,75 + 2,0 + 3,5mm.
  39,57 €
• 2CV6, 602ccm, engine gasket set inclusive. Shaft seals and ventil stem sealing. Suitable for Ci
  28,66 €
• Piston rings for Citroen 2CV6 starting from year of construction 1976. (1 set for 2 pistons). R
  29,70 €

Piston pin for Citroen 2CV6. Measurement: 20 x 64mm. Or.Nr.: AZ 1214

Quality: 3

Piston pin retaining ring, suitable for 2CV.

Quality: 0

Piston rings for Citroen 2CV4, 68,5mm bore, 435ccm. (1 set for 2 pistons). Label manufacturer. Measurements: 1,75 + 2.0 + 4,0mm. Engine A79/1, AYA2

Quality: 2

Piston rings for Citroen 2CV6 starting from year of construction 1976. (1 set for 2 pistons). Reproduction. Measurements: 1,75 + 2.0 + 3,5mm. Or.Nr.: 5503402.

Quality: 4

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €

Piston rings, for 2 pistons, original, 602cc engine as from 1976. Measure: 1,75 + 2,0 + 3,5mm. 74mm bore. Improved version with 2 steel rings! The benefits are: Higher running performance, resistant, improves adaptation to the liner, less friction, reduction of the oil consumption!

Quality: 1

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €

Piston rings for Citroen 2CV6 to year of construction 1976. (1 set for 2 pistons). Bore 74mm. Label manufacturer! Measurements: 1,5 + 2.0 + 4,0mm

Quality: 2

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €

Crankshaft for 2CV6. New part. We only import the crankshafts from South America, which are made on the original tools and with the original materials (this factory produce the 2CV for the South American market). Attention, there are also cheaper crankshafts from China, but we do not offer them for quality reasons. The crankshaft is supplied without pilot bearings! A brass bush is included, but its inner diameter does not fit. So remove the brass bush and fit the pilot bearing.

Quality: 3 360°

• Suitable for this article
• 2CV6, 602ccm, engine gasket set inclusive. Shaft seals and ventil stem sealing. Suitable for Ci
  28,66 €

Crankshaft gear wheel narrowly, for Citroen AMI8 + 2CV6. 22 teeth. Gear-wide: 13,6mm. Wide one completely: 15,6mm.

Quality: 2

• Suitable for this article

Camshaft completely with bearings. Suitable Citroen for 2CV6. Original Citroen, no reproduction! We could find a stock, with supported over 400 original camshafts. These are now in our existence.

Quality: 2 360°

Connecting rod bush for Citroen 2CV (not suitable for 2CV6). Inside diameter: 19,5mm, outside diameter: 22,1mm, height length: 25mm

Quality: 3

Flywheel screw M8x1, lenght aboaut 28mm. Suitable for Citroen 2CV starting from 1967. Reproduction, per piece. Note: Flywheel screws are necked-down bolts and should be always changed, if it released.

Quality: 3

Fly wheel, bearing in the fly wheel. Mounting (guide) for the primary shaft. Suitable for Citroen 2CV. Inside diameter: 12mm, outside diameter: 18mm, height: 16mm.

Quality: 3

Flywheel / crankshaft, bearing in the flywheel. Mounting (guide) for the primary shaft. Suitable for Citroen 2CV4 + 2CV6, up to year of construction 02/1972. Design = needle bearing. Inner diameter: 12mm, outer diameter: 18mm, height: 10mm. Or. No. ZC9620 322U

Quality: 3

Flywheel / crankshaft, bearing in the flywheel. Mounting (guide) for the primary shaft. Suitable for Citroen 2CV6, from year of construction 03/1973 to 1990. design = needle bearing. Inner diameter: 12mm, outer diameter: 18mm, height: 16mm. Or. No. AM9121 100L

Quality: 3

• Suitable for this article
• Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly wheel. Suitable for
  2,46 €

Flywheel, new part (heavy version). Suitable for Citroen 2CV6, from 1970 to 02/1982. Weight: approx. 12kg. Also suitable for Citroen Dyane, AK, AMI. All 602cc engines with front drum brake. Or. No. AY8312-000.

Quality: 3

• Suitable for this article
• Clutch set for Citroen 2CV6 + 2CV4, of year of construction 1970 to 1982. (For vehicles with dr
  127,83 €
• Flywheel screw M8x1, lenght aboaut 28mm. Suitable for Citroen 2CV starting from 1967. Reproduct
  3,56 €

Fly wheel, new part. Suitable for Citroen 2CV 6, starting from year of construction 03/1982. We let produce again the complete fly wheel with gear rim, since the old gear rims are often worn. The fly wheel is fine-heaved and ready for assembly. Or. No. 95559486. Produced in Europe.

Quality: 3

• Suitable for this article
• Clutch completely, for Citroen 2CV6, of year of construction 03/1982 to 1990 (disc brake in fro
  128,82 €
• Flywheel screw M8x1, lenght aboaut 28mm. Suitable for Citroen 2CV starting from 1967. Reproduct
  3,56 €

Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly wheel. Suitable for Citroen for 2CV6. Size: 11,9x18x4mm. Or. No. 95495074. Made in Germany.

Quality: 3

Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly wheel. Suitable for Citroen for 2CV6. Size: 12x18x3mm. Or. No. 7903078053. Made in Germany.

Quality: 3

• Suitable for this article
• Flywheel / crankshaft, bearing in the flywheel. Mounting (guide) for the primary shaft. Suitabl
  9,82 €

Shaft seal crankshaft rear, for 2CV4. Oversize, for polished crankshafts. Measurements: 47.5 x 65 x 10mm.

Quality: 3

Shaft seal crankshaft rear for 2CV6. Measurements: 56x69x10mm. Original manufacturers! The best choice!

Quality: 2

Shaft seal crankshaft rear, for Citroen 2CV4. Measurements: 48x65x10mm. Or.Nr.: A121-80

Quality: 3

Shaft seal crankshaft rear, for Citroen 2CV6. Measurements: 56x69x10mm

Quality: 4

Shaft seal crankshaft in front, for Citroen 2CV (all engines). Improved version from silicone. Measurement: 30x42x8mm

Quality: 1

Shaft seal crankshaft in front, for Citroen 2CV + Visa 652. Suitable for all engines. Measurement: 30x42x8mm.

Quality: 3

Cam follower 2CV6, measurement: 24x42,5mm. Or.Nr.AZ1241. Made in France. High quality!

Quality: 3 360°

Cam follower 2CV6. Dimension: 24x42,5mm. Or.Nr.: AZ1241

Quality: 4 360°

Centrifugal weight securement sheet metal on the camshaft. Suitable for Citroen 2CV6.

Quality: 4

Centrifugal weights ignition timing, reproduction, original not available any more, per piece, bad reproduction. 2CV after 1967.

Quality: 4

Distributor cam of the ignition, for Citroen 2CV6. Very bad reproduction. We recommend the replacement on an electronic ignition.

Quality: 5

• Suitable for this article
• Electronic ignition system 12 Volt. For Citroen 2CV6. This electronic ignition system is very e
  197,83 €
• Ignition contact for Citroen 2CV 4+6, from manufactor Valeo!
  6,89 €