Citroen-2CV / 2CV6 / rear axle

Cap for the radius arm bearing rear (for vehicles with a brake line spiral in the rear axle). Suitable for Citroen 2CV, Dyane, AK, AMI, starting from year of construction 06/1970.

Quality: 3

Fixing bolt set (2x screw + 1x safety sheet), for the axles. Suitable for Citroen 2CV.

Quality: 3

Axle fixing bolt safety sheet. Suitable for Citroen 2CV. Per piece. The sheet metals are easily bended at the end. So it`s easy to mount. Made in Germany.

Quality: 3

• Suitable for this article
• Fixing bolt suitable for the axles, for Citroen 2CV, AK, DYane, ACDY, AMI. Length: 135 mm. Galv
  2,96 €

Fixing bolt suitable for the axles, for Citroen 2CV, AK, DYane, ACDY, AMI. Length: 135 mm. Galvanized. Tensile strength 10.9. Fits for the front and rear axle! Note: The screws must absolutely have this high tensile strength. A lot of people offer a normal screw with 8.8 tensile strength.

Quality: 1 360°

• Suitable for this article
• Axle fixing bolt safety sheet. Suitable for Citroen 2CV. Per piece. The sheet metals are easily
  2,93 €

Hub nut rear, 44ties. Suitable for Citroen 2CV, all years of construction. Reproduction, poor quality. Tightening torque: 343-392Nm.

Quality: 4

• Suitable for this article
• Grease cap rear, synthetic, for Citroen 2CV + DS. Cover for the wheel bearing, rear in the drum
  2,93 €
• 44 socket thin-walled, for the drum rear (release the hub nut). Suitable for Citroen 2CV. Mount
  22,71 €
• Ratchet reduction. From 3/4 inch (socket wrench) on 1/2 inch (ratchet).
  7,93 €
• Combination tool for wheel bearing nut and 44mm rear hub nut. Combination tool. Semi profession
  38,58 €

Rear axle nut, 44 mm wrench size. Suitable for Citroen 2CV, all years of construction. Tightening torque: 343-392Nm. Original Citroen! The better choice.

Quality: 2

• Suitable for this article
• Grease cap rear, synthetic, for Citroen 2CV + DS. Cover for the wheel bearing, rear in the drum
  2,93 €
• 44 socket thin-walled, for the drum rear (release the hub nut). Suitable for Citroen 2CV. Mount
  22,71 €
• Ratchet reduction. From 3/4 inch (socket wrench) on 1/2 inch (ratchet).
  7,93 €
• Combination tool for wheel bearing nut and 44mm rear hub nut. Combination tool. Semi profession
  38,58 €

44 socket thin-walled, for the drum rear (release the hub nut). Suitable for Citroen 2CV. Mounting ratchet: 3/4 inch.

Quality: 2

• Suitable for this article
• Ratchet reduction. From 3/4 inch (socket wrench) on 1/2 inch (ratchet).
  7,93 €

Brake tube protection (scoring protector)rear axle, for Citroen 2CV4+6. For vehicles with rear brake tubes on rear axle. This protector has to be put around the brake tube on rear axle in front of 3 path link.

Quality: 3

Brake drum rear (new part), with mounted wheel bearing. The brake drum is ready for assembly mounted. Consisting of: New brake drum, new wheel bearing, new shaft seal, new wheel bearing screw. Suitable for Citroen 2CV.

Quality: 3

• Suitable for this article
• Rear axle nut, 44 mm wrench size. Suitable for Citroen 2CV, all years of construction. Tighteni
  6,89 €
• Grease cap rear, synthetic, for Citroen 2CV + DS. Cover for the wheel bearing, rear in the drum
  2,93 €

Drum rear, new part. 180mm diameter. Suitable for Citroen 2CV, Dyane, ACDY, Mehari. The drum is supplied without wheel bearings. Or. No. 96995256

Quality: 3 360°

• Suitable for this article
• Wheel bearing for Citroen 2CV. The wheel bearings are in front and rear identically constructed
  22,71 €
• Wheel bearing shaft seal for Citroen 2CV, Ak, ACDY, AMI. The shaft seals are identically constr
  2,43 €
• Ring nut suitable for the wheel bearing, for 2CV. (Not suitable for AK, ACDY, AMI). Very proper
  8,91 €
• Rear axle nut, 44 mm wrench size. Suitable for Citroen 2CV, all years of construction. Tighteni
  6,89 €
• Grease cap rear, out of sheet metal. Suitable for all Citroen 2CV + Citroen DS. Cover for the w
  4,71 €

Rear brake drum puller. Specially made for Citroen 2CV. Made in Germany.

Quality: 3

Aluminium spacer under the rear axle. Suitable for Citroen 2CV. Dimension: 132 x 20mm. 10mm heavy.

Quality: 3

Molykote grease in cartouche for lubricating gun. 400g (graphite grease). Heavy duty roller bearing grease for lubricating universal joints etc.. By the high proportion of Molykote is this grease also outstanding suitable for lubricating sliding fits from cardan shaft`s, ... Water-rejecting! Caution not for high-speed bearings (wheel bearings).

Quality: 3

• Suitable for this article
• Grease gun, for lubricating grease cartridge. Hobby quality!
  23,71 €
• Lubricating gun small, 120cc. Optimally for on the way and difficult attainable lubrication nip
  18,74 €

Grease cap rear, out of sheet metal. Suitable for all Citroen 2CV + Citroen DS. Cover for the wheel bearing, rear in the drum.

Quality: 4

• Suitable for this article
• Rear axle nut, 44 mm wrench size. Suitable for Citroen 2CV, all years of construction. Tighteni
  6,89 €

Grease cap rear, synthetic, for Citroen 2CV + DS. Cover for the wheel bearing, rear in the drum Caution: ring nuts may have different inside diameters. Maybe the grease cap should be wrapped with insulating tape to get it fixed in the ring nut!

Quality: 3

• Suitable for this article
• Rear axle nut, 44 mm wrench size. Suitable for Citroen 2CV, all years of construction. Tighteni
  6,89 €

Grease gun, for lubricating grease cartridge. Hobby quality!

Quality: 4

• Suitable for this article
• Multi-purpose grease, cartridge 400g, suitable for our lubricating gun.
  6,34 €
• Molykote grease in cartouche for lubricating gun. 400g (graphite grease). Heavy duty roller bea
  8,32 €
• Lubricating grease, color red, 400g cartouche. Original one by TOTAL! Red lubricating grease wa
  7,93 €

Grease gun, for lubricating grease cartridge. Workshop quality from Liqui Moly!

Quality: 2

• Suitable for this article
• Multi-purpose grease, cartridge 400g, suitable for our lubricating gun.
  6,34 €
• Molykote grease in cartouche for lubricating gun. 400g (graphite grease). Heavy duty roller bea
  8,32 €
• Lubricating grease, color red, 400g cartouche. Original one by TOTAL! Red lubricating grease wa
  7,93 €

Rubber stop buffer for the radius arm, rear in the wheel housing. Conically. Suitable for Citroen 2CV, to year of construction 01/1973. (The rubber stop has a lowering bore for the securement)

Quality: 3

Rubber stop buffer for the radius arm, rear in wheel housing. Suitable for Citroen 2CV, of year of construction 1973 to 1990.

Quality: 3

Wheel bolt rear (in the drum), suitable for Citroen 2CV. Made in Germany!

Quality: 3

Combination tool for wheel bearing nut and 44mm rear hub nut. Combination tool. Semi professionally. Suitable for the wheel bearing nut in front + rear, and the rear hub nut. (Citroen 2CV)

Quality: 3

Rear wheel hub: Threating die for recutting the thread of the rear wheel hub - brake drum (where the 44 nut is mounted). Suitable for all Citroen 2CV, Dyane, AK, AZU, ACDY, AMI 6+8, Mehari. Very good workshop quality!

Quality: 3

• Suitable for this article
• Rear wheel hub: die holder (winch) for recutting the thread of the rear wheel hub - brake drum.
  34,61 €

Rear wheel hub: die holder (winch) for recutting the thread of the rear wheel hub - brake drum. Very good workshop quality!

Quality: 3

• Suitable for this article
• Rear wheel hub: Threating die for recutting the thread of the rear wheel hub - brake drum (wher
  79,23 €

Radius arm bearing for Citroen 2CV. Good reproduction. The radius arm bearings are identically constructed over the total construction period (also for Dyane, AK, AMI). They fit for the front axle and for the rear axle.

Quality: 3

• Suitable for this article
• Radius arm bearing shaft seal, suitable for Citroen 2CV. The shaft seal renews the felt washer!
  3,23 €

Radius arm bearing set, suitable for Citroen 2CV, Dyane, Ami. Consisting of: 4x radius arm bearing, 4x shaft seal radius arm bearing, 2x split pin for radius arm nut.

Quality: 3 360°

Radius arm bearing locknut, suitable for Citroen 2CV. Measurement: 63 x 150mm

Quality: 3

Radius arm bearing shaft seal, suitable for Citroen 2CV. The shaft seal renews the felt washer! Suitable for all year of construction and all series. (2CV, AK, AZU, ACDY, Dyane, AMI). Measurement: 72 x 95,6 x 7mm. Made in Germany.

Quality: 3

Radius arm bearing wrench (1833-T), to the loosening of the crown nut. Particularly produced for Citroen 2CV.

Quality: 3