Citroen-2CV / 2CV6 / brake line prefabricated + hydraulic lines

Brake line + fuel line fixture. Mounted laterally at the chassis. Suitable for Citroen 2CV4 + 2CV6. (Vehicles with light brake lines. 3,75mm). Reproduction, optically and technically like original.

Quality: 3

Brake line + hydraulic line connector, for lines with 3,50mm diameters. Suitable for Citroen 2CV, Citroen DS, Citroen HY etc. The connector operates with cutting rings. No Brake line flaring tool are required! There are pipes with 3,50mm + 3,75mm diameter. For 3,75mm you require the connector 32349!

Quality: 3

• Suitable for this article
• Brake + hydraulic line. Diameter: 3,5mm. Length: 7,62m. Material: Kunifer (copper - nickel allo
  49,48 €
• Brake + hydraulic line. Diameter: 3,50mm. Length: 25m. Material: Kunifer (copper - nickel alloy
  161,54 €

Brake line set from high-grade steel. Brake system DOT. Suitable for Citroen 2CV4 + 2CV6 to year of construction 1981 (vehicles with drum brake in front). This brake line set is completely preformed and is supplied with DOT seals. Brake line diameter: 3,75mm. Brake line connector: 8mm. Manufactured in Scandinavia. Corresponds to DIN EN 10217 /05.05, TCI ¦

Quality: 1 Pdf

Brake line set from high-grade steel. Brake system LHM. Suitable for Citroen 2CV6 starting from year of construction 1981 (vehicles with disc brake in front). This brake line set is preformed and with LHM seals. Manufactured in Scandinavia. Corresponds to DIN EN 10217 /05.05, TCI

Quality: 1 Pdf

• Suitable for this article
• LHM+ green, hydraulic fluid. 1 liter. Suitable for Citroen 2CV starting from year of constructi
  8,90 €
• Brake tube protection (scoring protector)rear axle, for Citroen 2CV4+6. For vehicles with rear
  4,71 €

Brake line from high-grade steel. Connection from the right brake caliper to the left brake caliper. Brake system LHM. Suitable for Citroen 2CV6 starting from year of construction 1981 (vehicles with disc brake in front). Corresponds to DIN EN 10217 /05.05, TCI

Quality: 1 Pdf

Brake line from high-grade steel. Connection of that 3 path link to the left rear wheel brake cylinder (spiral in the rear axle tube). Brake system LHM. Suitable for Citroen 2CV6 starting from year of construction 1981 (vehicles with disc brake in front). Corresponds to DIN EN 10217 /05.05, TCI

Quality: 1 Pdf

Brake line from high-grade steel. Connection of that 3 path link to the right rear wheel brake cylinder (spiral in the rear axle tube). Brake system LHM. Suitable for Citroen 2CV6 starting from year of construction 1981 (vehicles with disc brake in front). Corresponds to DIN EN 10217 /05.05, TCI

Quality: 1 Pdf

Brake line from high-grade steel. Connection from the master brake cylinder to the rear axle, on the 3 path links. Brake system LHM. Suitable for Citroen 2CV6 starting from year of construction 1981 (vehicles with disc brake in front). Corresponds to DIN EN 10217 /05.05, TCI

Quality: 1 Pdf

Brake line from high-grade steel. From the master brake cylinder to the brake caliper on the right. Brake system LHM. Suitable for Citroen 2CV6 starting from year of construction 1981 (vehicles with disc brake in front). Corresponds to DIN EN 10217 /05.05, TCI

Quality: 1 Pdf

3 way connector for the brake pipe`s, centrically at the rear axle (screwed joint 8mm). Suitable for Citroen 2CV, Dyane, Mehari.

Quality: 4

• Suitable for this article
• Brake pipe seal + hydraulic line seal (socket) green. For LHM (green hydraulic fluid), 3,75mm l
  0,49 €
• Brake line seal + hydraulic line seal (socket) red. For DOT brake fluid + LHS (red hydraulic fl
  0,49 €

Brake line, suitable for Citroen 2CV, to year of construction 06/1970. Citroen Mehari to year of construction 01/1972. Connection from the T-link to the front right wheel brake cylinder. Brake line diameter: 4,5mm. Connector: M9x1,25. Or. No. AY45331

Quality: 4

• Suitable for this article
• Brake hose seal DOT (red). For DOT brake system (normal brake fluid DOT4). 4,5mm line (connecto
  0,70 €

Brake line, suitable for Citroen 2CV, to year of construction 06/1970. Citroen Mehari to year of construction 01/1972. Connection between the brake hose and the T-link. Brake line diameter: 4,5mm. Connector: M9x1,25. Or. No. AY45360A

Quality: 4

• Suitable for this article
• Brake hose seal DOT (red). For DOT brake system (normal brake fluid DOT4). 4,5mm line (connecto
  0,70 €

Brake line, suitable for Citroen 2CV, to year of construction 06/1970. Connection of the master brake cylinder (front side) to the brake hose. Brake line diameter: 4,5mm. Connector: M9x1,25. Length: about 345mm. Or. No. AY453353A

Quality: 3

• Suitable for this article
• Brake hose seal DOT (red). For DOT brake system (normal brake fluid DOT4). 4,5mm line (connecto
  0,70 €

Brake line, suitable for Citroen 2CV, of year of construction 07/1964 to 02/1970. Connection at that rear wheel-radius arm, from the brake hose to the wheel brake cylinder. On the left + on the right fitting! Brake line diameter: 4,5mm. Connector: M9x1,25. Length: 630mm. Or. No. AY453-34B + AY453-34C.

Quality: 3

• Suitable for this article
• Brake hose seal DOT (red). For DOT brake system (normal brake fluid DOT4). 4,5mm line (connecto
  0,70 €

Brake line, suitable for Citroen 2CV, of year of construction 1964 to 1972. Connection of the master brake cylinder on the T-link at the rear axle. Brake line diameter: 4,5mm. Connector: M9x1,25. Length: 1950mm. Or.Nr.: AY 453-32B

Quality: 3

• Suitable for this article
• Brake hose seal DOT (red). For DOT brake system (normal brake fluid DOT4). 4,5mm line (connecto
  0,70 €

Brake lines + hydraulic line connectors, for lines with 3.5 - 3.75 mm diameter. Thread on both sides: M8x1.25. Optimal if 2 lines are to be connected to each other.

Quality: 3

• Suitable for this article
• Brake line seal + hydraulic line seal (socket) red. For DOT brake fluid + LHS (red hydraulic fl
  0,49 €
• Clinch screw, for 3,5mm - 3,75mm braking or hydraulic line. Thread: M8. Suitable wrench likewis
  0,75 €

Brake pipe seal + hydraulic line seal (socket) green. For LHM (green hydraulic fluid), 3,75mm line (connector 8mm). Suitable for Citroen 2CV6 (for the brake hoses), Installed starting from year of construction 1981 (2CV with disc brake). Citroen DS, GS, CX, etc. for hydraulic lines.

Quality: 3

Brake tube protection (scoring protector)rear axle, for Citroen 2CV4+6. For vehicles with rear brake tubes on rear axle. This protector has to be put around the brake tube on rear axle in front of 3 path link.

Quality: 3

Brake hose seal + hydraulic line seal (socket) green. For LHM (hydraulic fluid green), 4,5mm line (connector 9mm). Suitable for Citroen DS, HY with hydraulics, GS, CX etc.

Quality: 3