Citroen-2CV / 2CV6 / floor panels

2CV RHD, pedal floor pan double. Strengthened version. For all Citroen 2CV RHD (right hand steering) with hanging brake + clutch pedal (installed from about 1977 to 1987). The pedal floor plate is electrolytically coated (very good rust protection). Made in Europe.

Quality: 3

2CV, Sheet metal behind the seat bench box, transition to the wheel housings. Suitable for Citroen 2CV.

Quality: 4

2CV, sheet metal behind the seat bench box, between the wheel housings. Suitable for Citroen 2CV, all years of construction. Very good reproduction, better than original! Made in Europe.

Quality: 3

Floor pan 1/3 in front, on the left. The sheet metal is about 31cm long. Suitable for Citroen 2CV. Made in Europe.

Quality: 3

• Suitable for this article
• Floor pan 1/3 in front, on the right. The sheet metal is about 31cm long. Suitable for Citroen
  19,68 €

Floor pan 1/3 in front, on the right. The sheet metal is about 31cm long. Suitable for Citroen 2CV. Made in Europe.

Quality: 3

2CV, Cross-beam under floor pan rear crosswise (long cross-beam), suitable for Citroen 2CV4 + 2CV6. The cross-beam fits on the left + on the right. 360mm lengthens. Made in Europe.

Quality: 3

2CV, Cross-beam under floor pan in longitudinal direction, suitable for Citroen 2CV4 + 2CV6. The cross-beam joins the two cross bars of the floor pan. On the left + on the right fitting. Made in Europe.

Quality: 4

2CV, cross-beam under floor pan in front crosswise (short cross-beam), suitable for Citroen 2CV4 + 2CV6. The cross-beam fits on the left + on the right. 325mm lengthens. Made in Europe.

Quality: 4

2CV, floor pan on the left. For Citroen 2CV after year of construction 1970 to production end. (Mounting of the seats on seat tracks!). Very good reproduction. Optically and technically the Orignal accordingly. The floor pans are supplied with all flanges, reinforcement and threads The sheet metal goes from the pedal floor plate to the seat bench box. Made in Europe.

Quality: 3

• Suitable for this article
• 2CV, Floor pan, plastic plug, to plug from 44 - 45mm openings. (Connector from the floor pans o
  2,37 €
• M7, chassis nut (securement of the body). Suitable for Citroen 2CV (newer version with in-punch
  0,98 €
• Screw M9x25, gold chromate, FVP Bolts
  2,88 €

2CV, floor pan on the left. Reinforce version (1,1mm sheet metal instead of 0.7mm). For Citroen 2CV after year of construction 1963 to production end. (Mounting of the seats on seat tracks!). Very good reproduction. Optically and technically the Orignal accordingly. The floor pans are supplied with all flanges, reinforcement and threads The sheet metal goes from the pedal floor plate to the seat bench box. Made in Europe.

Quality: 1

• Suitable for this article
• 2CV, Floor pan, plastic plug, to plug from 44 - 45mm openings. (Connector from the floor pans o
  2,37 €
• M7, chassis nut (securement of the body). Suitable for Citroen 2CV (newer version with in-punch
  0,98 €
• Screw M9x25, gold chromate, FVP Bolts
  2,88 €

2CV, floor pan on the right. For Citroen 2CV after year of construction 1963 to production end. (Mounting of the seats on seat tracks!). Very good reproduction. Optically and technically the Orignal accordingly. The floor pans are supplied with all flanges, reinforcement and threads The sheet metal goes from the pedal floor plate to the seat bench box. Made in Europe.

Quality: 3

• Suitable for this article
• 2CV, Floor pan, plastic plug, to plug from 44 - 45mm openings. (Connector from the floor pans o
  2,37 €
• M7, chassis nut (securement of the body). Suitable for Citroen 2CV (newer version with in-punch
  0,98 €
• Screw M9x25, gold chromate, FVP Bolts
  2,88 €

2CV, floor pan on the right. Reinforce version (1,1mm sheet metal instead of 0.7mm). For Citroen 2CV after year of construction 1963 to production end. (Mounting of the seats on seat tracks!). Very good reproduction. Optically and technically the Orignal accordingly. The floor pans are supplied with all flanges, reinforcement and threads The sheet metal goes from the pedal floor plate to the seat bench box. Made in Europe.

Quality: 1

• Suitable for this article
• 2CV, Floor pan, plastic plug, to plug from 44 - 45mm openings. (Connector from the floor pans o
  2,37 €
• M7, chassis nut (securement of the body). Suitable for Citroen 2CV (newer version with in-punch
  0,98 €
• Screw M9x25, gold chromate, FVP Bolts
  2,88 €

2CV, Floor pan, plastic plug, to plug from 44 - 45mm openings. (Connector from the floor pans on the chassis).

Quality: 3

2CV, Floor pan, reinforcement bracket at the transition from the pedal base floor plate to the floor pan. Suitable for Citroen 2CV. Made in Germany.

Quality: 3

Floor pan, reinforcement bracket from the floor pan to the seat bench box. Suitable for Citroen 2CV. Made in Germany.

Quality: 3

Floor pan - box sill, mounting bracket for the seat belt attachment. Suitable for Citroen 2CV. 1 set on the left + on the right. Made in Germany.

Quality: 3

• Suitable for this article
• Screw M9x25, gold chromate, FVP Bolts
  2,88 €

2CV, Floor pan in front, interior of 2CV. It is only a simple repair sheet metal with box sill inner edges (floor pan + pedal base). Made in Europe.

Quality: 4

Pedal floor plate outside, strengthened version. Suitable for Citroen 2CV. Made in Germany by Franzose.

Quality: 1

• Suitable for this article
• Pedal floor plate inside, strengthened, without flanges, for Citroen 2CV with hanging pedals. M
  19,73 €

2CV, pedal floor plate double. Original, no replica. For all Citroen 2CV with hanging brake + clutch pedals (used approx. 1977 to 1990). Made in France

Quality: 2

2CV, pedal floor pan double. Strengthened version. For all Citroen 2CV with hanging brake + clutch pedal (installed from about 1977 to 1990). The pedal floor plate is electrolytically coated (very good rust protection). Made in Europe.

Quality: 1

2CV, Pedal floor plate doubles. Strenghened version. For all Citroen 2CV with standing foot throttle and hanging brake pedal + clutch pedal. (Installed about 1970 to 1977.) The pedal floor plate is electrolytically coated (very good rust protection). Made in Europe.

Quality: 3

2CV, Pedal floor plate inside, with all flanges (Repair sheet metal). Very good reproduction, for Citroen 2CV with hanging pedals. Made in Europe.

Quality: 3

• Suitable for this article

Pedal floor plate inside, strengthened, without flanges, for Citroen 2CV with hanging pedals. Made in Germany.

Quality: 0

• Suitable for this article
• Pedal floor plate outside, strengthened version. Suitable for Citroen 2CV. Made in Germany by F
  24,69 €

2CV, Seat bench box complete for Citroen 2CV. This is a very good reproduction and in view of the quality better than the original seat bench box. Additionally, it is electrolytically galvanized. Made in Europe.

Quality: 3

• Suitable for this article
• Seat bench box, connection sheet metal for the bottom surface, on the left. The sheet metal fix
  7,83 €
• Seat bench box, connection sheet metal for the bottom surface, on the right. The sheet metal fi
  7,83 €

Seat bench box on the left, sheet metal for the transition from the wheel housing to the box sill. The sheet metal is at the bottom surface of the seat bench box. Made in Germany.

Quality: 2

• Suitable for this article
• Seat bench box, connection sheet metal for the bottom surface, on the left. The sheet metal fix
  7,83 €

Seat bench box on the right, sheet metal for the transition from the wheel housing to the box sill. The sheet metal is at the bottom surface of the seat bench box. Made in Germany.

Quality: 2

• Suitable for this article
• Seat bench box, connection sheet metal for the bottom surface, on the right. The sheet metal fi
  7,83 €

Seat bench box, connection sheet metal for the bottom surface, on the left. The sheet metal fixed between box sills and the sheet metal 15180. Made in Germany.

Quality: 3

• Suitable for this article
• Seat bench box on the left, sheet metal for the transition from the wheel housing to the box si
  15,82 €

Seat bench box, connection sheet metal for the bottom surface, on the right. The sheet metal fixed between box sills and the sheet metal 15181. Made in Germany.

Quality: 3

• Suitable for this article
• Seat bench box on the right, sheet metal for the transition from the wheel housing to the box s
  15,82 €

2CV, seat bench box, sheet metal centrically, for the bottom surface of the seat bench box. Suitable for Citroen 2CV. On the left + on the right of this sheet metal, connect the sheet metals 15180 + 15181. Made in Germany.

Quality: 3

2CV, seat bench box, sheet metal bottom surface, centrically, like original with all flanges and indentations. On the left + right connect sheet metals 15180 + 15181. Made in Europe.

Quality: 3

Seat box corner at the rear left. Suitable for Citroen 2CV. That is the diagonal corner plate which you can see, if one opens the rear door. Made in Germany.

Quality: 2

Seat box corner at the rear right. Suitable for Citroen 2CV. That is the diagonal corner plate which you can see, if one opens the rear door. Made in Germany.

Quality: 3

2CV, floorpan plate centrically for the original chassis of Citroen 2CV, Dyane. (semicircular recess). Made in Europe.

Quality: 5

2CV, Reinforcement cross-beam under the seat bench, for Citroen 2CV. This cross-beam is welded crosswise and the transition to the sheet metal between the wheel housings and the luggage compartment. Made in Germany.

Quality: 3

2CV6, exhaust fixture 2CV6, rear, from high-grade steel! That is the upper, rear handle, which is locked under the floor pan. Suitable for Citroen 2CV6 + 2CV4. Made in Germany.

Quality: 1

• Suitable for this article
• 2CV6, exhaust fixture 2CV6, rear, from high-grade steel! That is the lower, rear handle, which
  10,32 €

2CV6, exhaust fixture 2CV6, rear, galvanizes! That is the upper, rear handle, which is locked under the floor pan. Suitable for Citroen 2CV6 + 2CV4. Dyane, AK

Quality: 3

• Suitable for this article
• M7, chassis nut (securement of the body). Suitable for Citroen 2CV (newer version with in-punch
  0,98 €

2CV6, exhaust fixture 2CV6, in front, from high-grade steel! The handle is locked under the floor pan. Suitable for Citroen 2CV6 + 2CV4. Made in Germany.

Quality: 1

2CV6, exhaust fixture 2CV6, in front, galvanizes. The handle is locked under the floor pan. Suitable for Citroen 2CV6 + 2CV4.

Quality: 4

• Suitable for this article
• M7, chassis nut (securement of the body). Suitable for Citroen 2CV (newer version with in-punch
  0,98 €

2CV6, exhaust fixture 2CV6, rear, from high-grade steel! That is the lower, rear handle, which is locked under the floor pan. Note: Connector with 6mm screws! Suitable for Citroen 2CV6 + 2CV4. Made in Germany.

Quality: 1

• Suitable for this article
• 2CV6, exhaust fixture 2CV6, rear, from high-grade steel! That is the upper, rear handle, which
  11,85 €

2CV6, exhaust fixture rear, galvanizes! That is the lower, rear handle, which is locked under the floor pan. Suitable for Citroen 2CV6 + 2CV4.

Quality: 3

AZAM, floor pan on the left, for Citroen 2CV AZAM. (De luxe model from Belgium.) The floor pan has the high curvature for the large suspension pot of the Ami6. Made in Europe.

Quality: 4

AZAM, floor pan on the right, for Citroen 2CV AZAM. (De luxe model from Belgium.) The floor pan has the high curvature for the large suspension pot of the Ami6. Made in Europe.

Quality: 4