Renault / Other Renault / engine block

Exhausting filter for engine exhausting. Suitable for Renault R16, R15, R17. Citroen CX 2400, etc. Dimension: Diameter above: 30mm. High of filter: 28mm. Overall height: 46mm. Connection diameter: 18mm. Or. No. 7700550429 + 96072385

Quality: 0

Felt strips for sealing crankshafts, wheel bearings, rear axles, etc. (especially for car applications). Dimension: 5,0 x 4,0 x 110mm. Manufacturer: SKF

Quality: 2

Felt strips for sealing crankshafts, wheel bearings, rear axles, etc. (especially for car applications). Dimension: 5,0 x 4,0 x 170mm. Manufacturer: SKF

Quality: 2

Felt strips for sealing crankshafts, wheel bearings, rear axles, etc. (especially for car applications). Dimension: 6,0 x 5,0 x 300mm. Manufacturer: SKF

Quality: 2

Felt strips for sealing crankshafts, wheel bearings, rear axles, etc. (especially for car applications). Dimension: 9.0 x 7.5 x 330mm. Manufacturer: SKF

Quality: 2

Frost threaded plug. Diameter: 27mm. Suitable for Peugeot 504 V6. Alpina A310, Renault R30, R5. Or. No. 0232.12

Quality: 3

Crank house exhausting 3 path link. Suitable for various Renault. E.G.R16, R4, R15, R17 etc. Or. No. 7701502675

Quality: 0

Crank house exhausting link (with grain sieve). Suitable for various Renault. E.G.R16, R4, R15, R17 etc. Or. No. 0824505800

Quality: 0

Lotus Europa, piston + cylinder (4 pieces) for Renault engine 697 (high compression special design). This design was only used in the Lotus Europa Special!

Quality: 3

Lotus Europa, piston + cylinder (4 pieces) for Renault engine 821 (high compression special design). This design was only used in the Lotus Europa Special!

Quality: 3

Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil pans, valve cap, valve timing cover. Very good quality. Made in Germany.

Quality: 3

• Suitable for this article
• Scrapers professional version, to remove of labels on disks, engine sealing remainders scrape
  16,76 €
• Scraper spare blades for 20484 (5 St)
  6,84 €

HYLOMAR engine sealing material, permanent elastic engine sealing, indispensable with engine overhaul, 80ml. Hylomar M is temperature resistant between -50°C and +250°C and can be applied for sealing sealing surfaces and threaded pieces.

Quality: 2

Reinzosil engine sealant from Reinz. Extremely high stability at high temperatures. Reinzosil is a fast curing silicone sealant for flat joints with sealing gap (even without component disassembly). Very practical. Temperature resistant up to 300°C. Content: 200ml

Quality: 1

Oil drain screw without magnet (interior square 8x8). Thread: M16 x 1,5. Suitable for Peugeot 204, 304, 404, 504, 604, 505, J5, J7, J9. Renault. Citroen CX, BX, ZX, C15. Or. No. 0163.93

Quality: 3

• Suitable for this article
• Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw, mea
  0,48 €
• Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of the original oil
  31,14 €
• Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €
• Special tool for the oil drain screw. Square 8 + 10mm. Suitable for Peugeot + Renault.
  10,81 €
• Copper seal type A, (full copper). 16x22x1,5mm.
  0,48 €

Oil drain screw seal 18 x 24 x 2mm (for M18 thread). Suitable for Peugeot 203, 403, 404, 504, 505, J7 (all engines). Renault R4. Citroen HY. Oil cooler screwed joint 2CV with 16HP!

Quality: 4

Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw, measure: 16,3x22x2mm. Version C, curved with a seal inside. (PTFE)

Quality: 3

Oil pressure switch (Diesel). Thread M18 x 1,5. Suitable for Peugeot 204D, 304D, 305D, 404D, 504D, 505D, 604D. Citroen HY Diesel. Renault Diesel: R9, R11, R18, R20, R25, R30. Talbot Tagora Diesel. Response pressure: 0,8 bar. Or. No. 1131.10 . Due to the design, there is always a drop of oil at the electrical connection. Alternatively, the modern oil pressure switch 70733 can be installed.

Quality: 3

• Suitable for this article
• Oil pressure switch Peugeot. Suitable for Peugeot 104. 203, 204, 304, 305, 403, 404, 504. Citro
  12,79 €

Oil pan seal euro engine (PRV). Suitable for Peugeot 504 V6, Peugeot 604 V6. Renault Alpine A310 V6 (not for engines with aluminum oil pan), R30 V6.

Quality: 2

P 504V6, chain for the oil pump. Suitable for Peugeot 504 V6. Renault R30, Alpine V6. Wide one: 1 chain link, length: 44 chain links.

Quality: 2

R4/R5/R6/R8/R12, camshaft drive chain, 58 chain links, for Renault R4 R5/R6 R8/R12/TWINGO. Engines: C, C1C, C1E, 680, 688, 810, 813, 839, 899, 810-02, C3G700. Wide one: 1 chain link. (Simplex)

Quality: 2

• Suitable for this article
• Camshaft drive chain tensioner. For camshaft drive chain, with 58 links. Engine: C, C1C, C1E, 6
  29,66 €

R4, R8, Alpine, camshaft drive chain set, 58 chain links (simple - simplex chain), suitable for Renault R4, R8, Alpine 1300. Consisting of: Camshaft drive chain, chain pinion for crankshaft + camshaft, gear seal cap.

Quality: 3

• Suitable for this article
• Camshaft drive chain tensioner. For camshaft drive chain, with 58 links. Engine: C, C1C, C1E, 6
  29,66 €

Camshaft drive chain. Suitable for Peugeot 504 V6. Renault R30, Alpine V6. Wide one: 1 link (simplex). Length: 94 links. Per piece! For one car, you need 2 pieces!

Quality: 2

Timing chain set, old version. Suitable for Renault R4 (854cc³). R5, R10, R12, Estafette, Twingo. Engine: 800, 840, 847, C1J. Consisting of: Or. No. 7701460489, 7700722758, 7700655335, 7700564398. Made in Spain. Attention: Different gears are included (but have the same number of teeth). Please install the version you find in your engine!

Quality: 3

Camshaft drive chain guide at the camshaft drive chain tensioner. Suitable for Peugeot 504 V6, 604 V6. Renault R30, Alpine V6. Per piece! You need 2 pieces.

Quality: 3

Camshaft drive chain guide, for V6 engine. Suitable for Peugeot 504 V6, 604 V6. Renault R30, Alpine V6. The camshaft drive chain guide is mounted opposite of the camshaft drive chain tensioner. Per piece.

Quality: 3

Camshaft drive chain tensioner, old version. Suitable for Renault R4 (854cc ³). R5, R10, R12, Estafette, Twingo. Engine: Motor: 800, 840, 847, C1J. Or. No. 7701460489, 7700860495, 6000547142

Quality: 3

Camshaft drive chain tensioner. For camshaft drive chain, with 58 links. Engine: C, C1C, C1E, 680, 688, 810, 813, 839, 899, 810-02, C3G700. Suitable for Renault R4, R5, R6, R9, R11, R12.

Quality: 3

• Suitable for this article
• R4/R5/R6/R8/R12, camshaft drive chain, 58 chain links, for Renault R4 R5/R6 R8/R12/TWINGO. Engi
  49,48 €
• R4, R8, Alpine, camshaft drive chain set, 58 chain links (simple - simplex chain), suitable for
  52,55 €

Tappet cup set (8 pcs) for Renault engines 697/807/821/841/843/845. The tappet cup have been used in historic racing for years. They are made of chilled cast iron >52 HR C Scale. The nitrided thickness is 0,040-0,045mm, which gives a wear resistance of >60 HR C-Scale! Suitable for the following cars: R16, R16TS, R16TL, R16L, R15TS, R17TL, R16TS, R12 Gordini, R18 Turbo, Alpine A110 1600S, Alpine A310 (4 cylinders). Lotus Europa 1600. Or. no. 7700640248 + 0556057900

Quality: 1