Renault / Other Renault / crankshaft-camshaft-piston-flywheel

4CV/Dauphine/Floride, spur gear of 31 teeth (Aluminium). Diameter: 98mm. Inside diameter: 20mm. Width of the teeth: 17mm. Suitable for Renault 4CV, starting from year of construction 1952. Renault Dauphine, Floride. Very good reproduction.

Quality: 3

4CV/Dauphine/Floride/Juvaquatre, camshafts drive wheel (Novotex). 42 teeth. Outside diameter: 132mm. Inside diameter: 24mm. Original from Ferrozell!

Quality: 0

4CV/Dauphine/Floride/Juvaquatre. Crankshaft gear wheel (steel). 16 teeth. Inside diameter: 25mm. Outside diameter: 53,5mm. Wide one: 19mm.

Quality: 0

Alpine110, R12 Gordini, R17TS, piston + liner (4 pieces). Suitable for Renault alpine one 110, R12 Gordini, R17TS (R1313, R1323). Engine: 807 12/20. Engine capacity: 1564cc. Bore: 77mm. Piston pin: 21 x 65mm. Piston rings: 1,75 + 2 + 4,0mm. Outside diameter down: 82,50mm. Outside diameter above: 96,0mm. Height totally: 143,50mm.

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

A310, piston (per piece). Suitable for Renault Alpine A310 V6. Engine: 112.7.30. Bore: 88,0mm. Piston pin: 23.5 x 72,0mm. Piston rings: 1,5 + 2.0 + 4,0mm.

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €
• A310, liner (per piece) Renault Alpine A310 V6. Engine: 112.7.30. Bore: 88mm.
  67,46 €

A310, liner (per piece) Renault Alpine A310 V6. Engine: 112.7.30. Bore: 88mm.

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €
• A310, piston (per piece). Suitable for Renault Alpine A310 V6. Engine: 112.7.30. Bore: 88,0mm.
  217,18 €

Juvaquatre, piston (4 fittings). Suitable for Renault Juvaquatre, of year of construction 1938 to 1953. Version: AEB1 1938, AEB2/B3 1939, BFK2 1940, HG1 1040, BFK4 1045 to year of construction 1948, AHG2, of year of construction 1946 to 1953. Bore: 58mm. Piston pin: 15 x 49mm. Piston rings: 2,5 + 2,5 + 3,5mm.

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

Piston ring set, per piston. Suitable for Renault engine: 1289cc. Bore: 73,0mm. Piston rings: 1,75 + 2.0 + 4,0mm. Renault R5, R12, R15 (R1224, R1330, R1337).

Quality: 2

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

Piston ring set, per piston. Suitable for Renault engine: 1289cc. Bore: 73,0mm. Piston rings: 1,75mm + 2,0mm + 4,0mm. Renault R5, R6, R10, R12 (R1192, R1170, R1171, R1337, R2126, R2136, R2137).

Quality: 2

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

Piston ring set, per piston. Suitable for Renault engine: 841-843-C7-D7 (1647ccm). Bore: 79mm. Piston rings: 1,75mm + 2,0mm + 4,0mm. Renault R16, R18, Alpine A310.

Quality: 2

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

Liner gasket bottom (1 set). For V6 Euro engine (PRV) with 2664cc. Suitable for Peugeot 504 V6, 604 V6. Renault R30, R25 V6, Alpine A310.

Quality: 2

Liner gasket bottom (1 set). For V6 Euro engine (PRV) with 2849cc. Suitable for Peugeot 604 V6. Renault R30, R25 V6, Alpine A310.

Quality: 2

P 504V6, chain for the oil pump. Suitable for Peugeot 504 V6. Renault R30, Alpine V6. Wide one: 1 chain link, length: 44 chain links.

Quality: 2

P 504 V6, piston ring set (for 1 piston), for 6 liners. Engine: ZNJK. Engine capacity: 2849cc. Bore: 91mm. Piston rings: 1,5mm + 2,0mm + 4,0mm. Suitable for Peugeot 505 V6, 604 V6. Renault 30, Alpine V6.

Quality: 2

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

Piston rings for V6 engine. 2,7L. 88mm bore. Suitable for Peugeot 504 V6 Cabrio + Coupe. Peugeot 604 V6. Renault R30 + Alpine A310 V6. Complete set for 6 pistons! Dimension of piston rings: 1,5mm + 2,0mm + 4,0mm.

Quality: 2

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

P 504 V6/604 V6/R30/Alpinen 310 V6, connecting rod bearing set (bimetal), standard measurement of 60 mm, with stroke offset. Engines 2,7L + 2,85L.

Quality: 2

P 504 V6/604/Alpine A310 V6/R30, connecting rod bearing kit small (trimetal). 0,30 oversize. For 52mm crankshaft. Suitable for Peugeot 504 V6, 604 V6. Renault Alpine A310 V6, Renault R30.

Quality: 3

P 504 V6/604/Alpine A310 V6/R30, connecting rod bearing set small (trimetal). Standard dimensions. For 52mm diameter. Suitable for Peugeot 504 V6, 604 V6. Renault Alpine A310 V6, Renault R30.

Quality: 3 360°

P 504 V6/604/Alpine A310 V6/R30, crankshaft bearing set (V6 BRV). 0,30 oversize. Suitable for Peugeot 504 V6, 604 V6. Renault Alpine A310 V6, Renault R30. Made in France

Quality: 3

P 504 V6/604/Alpine A310 V6/R30, crankshaft bearing set (V6 BRV). Standard dimensions. Suitable for Peugeot 504 V6, 604 V6. Renault Alpine A310 V6, Renault R30. Made in France

Quality: 3

P 504V6/604/R30, liners sealing rings down (6 fittings). Suitable for Peugeot 504 V6 + Peugeot 604 V6. Renault R30. Talbot Tagora 2.6. 2664cc. Inside diameter: 91mm. Outside diameter: 100mm.

Quality: 2

P 504V6/R30, camshafts shaft seal (left-hand rotation). Suitable for Peugeot 504 V6, 604 V6. Renault R30 V6, Citroen XM. Dimension: 32 x 45 x 8mm.

Quality: 2

Primaquatre, camshafts drive wheel (Novotex). 52 teeth. Outside diameter: 161mm. Inside diameter: 22mm. Original from Ferrozell

Quality: 0

Primaquatre, camshafts drive wheel (Novotex). Suitable for Renault Primaquatre, starting from year of construction 1946 (R2160, R2060, R2062). Engine: 603. 52 teeth. Outside diameter: 161mm. Inside diameter: 38mm.

Quality: 0

R16/Alpine, camshaft with distributer propulsion. For Renault engine 807-841 + 843. Suitable for Renault R16 TS + R16 TX. R17 + R12 Gordini. Renault Alpine A110. New part.

Quality: 3

R16/R12/R16, piston ring set (for 1 piston). Suitable for Renault R16, R12, R17. Bore: 77mm. Engine: 821 + 807 (1565cc). Piston ring thickness: 1,75 + 2.0 + 4,0mm.

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

R16/R12Gordini/R17/R20. Camshaft drive chains set, consisting of camshaft drive chain duplex - 72 chain links, gear crankshaft of 18 teeth, chain tensioners. Suitable for 1565cc, 1647cc, 1605cc. Original supplier.

Quality: 2

R16/R15/R12/Alpine, safety sheet for the fly wheel. Suitable for Renault, with 1600ccm engine. Or. No. 0608395100

Quality: 0

R16/R15/R17, thrust washer (thrust bearing) crankshaft. Standard size. Suitable for Renault R16, R15, R17. Renault Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.

Quality: 3

R16/R17/R18/R20, piston + liner (4 item). Renault engine 841 01 /04/02/05/06/15/16/10/11/99(1647cc). Suitable for Renault R16TX, TA. R17TL. R18TS, GTS. R20TL. Fuego. R12. Bore: 79mm. Piston pin: 21 x 69mm. Piston rings: 1,75 + 2 + 4,0mm. Outside diameter down: 84,0mm. Outside diameter above: 96,0mm. Height totally: 143,50mm.

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

R16/R18/R20, bottom liner gasket (foot gasket. Suitable for Renault R16 TA (01/1973 to 08/1980) + R16 TX (06/74 to 09/80. Engine code 843.01). R18 + R20 (engines: 843-05, 843 723/20, 807 727, 841 705/717/725/726). Or. No. 7701348226

Quality: 3

R16R15/R17, crankshaft bearing set. 0,25 oversize. Suitable for Renault R16, R15, R17. Renault Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.

Quality: 3

R16R15/R17, crankshaft bearing set. Standard size. Suitable for Renault R16, R15, R17. Renault Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. diameter: 54,8mm, width: 20,50mm. Reproduction from the EU.

Quality: 3

R16R15/R17, connecting rod bearing set. 0,25 oversize. Suitable for Renault R16, R15, R17. Renault Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.

Quality: 3

R16R15/R17, connecting rod bearing set. Standard size. Suitable for Renault R16, R15, R17. Renault Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.

Quality: 3

R4/4CV/Dauphine/R5, crankshaft thrust washer (axial clearance), 1 oversize 0,10mm. Dimension: Inner diameter 44mm, outer diameter 55,6mm, 2mm thick. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800,B1B, 800 70. Capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride

Quality: 3

R4/4CV/Dauphine/R5, crankshaft thrust washer (axial clearance), standard dimension. Dimension: Inner diameter 44mm, outer diameter 55,6mm, 2mm thick. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800,B1B, 800 70. Capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride

Quality: 2

R4/4CV/Dauphine/R5, crankshaft bearing set (3 bearing, B = Billancourt). 1 oversize (+0,25). Wide one: 1x 27,10mm, 1x 30,10mm, 1x 32,84mm. Crankshaft: 39,975 to 39,990mm. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800, B1B, 800 70. Engine capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride

Quality: 2

R4/4CV/Dauphine/R5, crankshaft bearing set (3 bearing, B = Billancourt). 2 oversize (+0,50). Wide one: 1x 27,10mm, 1x 30,10mm, 1x 32,84mm. Crankshaft: 39,975 to 39,990mm. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800, B1B, 800 70. Engine capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride

Quality: 2

R4/4CV/Dauphine/R5, crankshaft bearing set (3 bearing, B = Billancourt). Standard dimension. Wide one: 1x 27,10mm, 1x 30,10mm, 1x 32,84mm. Crankshaft: 39,975 to 39,990mm. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800, B1B, 800 70. Engine capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride

Quality: 2

R4/4CV/Dauphine, connecting rod bearing (complete set). Dimension: Standard dimension. (41.128 to 41,138mm). Wide one: 21,16mm. Suitable for Renault engines: 662, 690, 680 702, 839 706, 670, 800 710, B1B. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride, Estafette (747cm³). For piston rod pins: 38,00mm.

Quality: 2

R4/4CV/Dauphine/R5, connecting rod bearing set. Wide 21,16mm. 1 oversize (+0,25). Suitable for Renault engines: 662, 690, 680,702, 839 706, 670, 800 710. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. For piston rod pins: 37,75mm. Suitable fpr R4, R5, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride, Estafette (747cm³)

Quality: 2

R4/4CV/Dauphine, connecting rod bearing set. Wide 21,16mm. 2 oversize (+0,50). Suitable for Renault engines: 662, 690, 680,702, 839 706, 670, 800 710. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. For piston rod pins: 37,50mm.

Quality: 2

R4/Estafette/Dauphine/Floride, piston + liner (4 pieces). Engine: Ventoux 670, 670-1, 670-5, 800-02. Engine capacity: 845ccm. Suitable for Renault R4 (5CV), Estafette (R1090, 1091, 1092, 1092, 1095, 2101 2130, 2131), Dauphine + Ondine + Gordini, Floride, Fourgonette, R6 (R1180 09/1968 to 04/1969). Bore: 58,0mm. Piston pin: 14 x 48mm. Piston rings: 1,75 + 2 + 3,5mm. Outside diameter down: 62,50mm. Outside diameter above: 73,0mm. Height totally: 126,0mm. Attention: It is importand that the liners are mounted with copper rings at the bottom. Our article number 80182

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €
• Liners sealing rings down, made of copper. Diameter: 62,5x70x1mm. Suitable for the following Re
  9,82 €

R4/R3, spur gear (idler gear) Novotex. Suitable for Renault R3 + R4. 35 teeth. Inside diameter: 35,75mm. Outside diameter: 100,06mm.

Quality: 0

R4/R3, spur gear (idler gear) Novotex. Suitable for Renault R3 + R4. 6/100mm oversize. 35 teeth. Inside diameter: 35,69mm. Outside diameter: 100,06mm.

Quality: 0

R4/R5/R12, gear rim fly wheel. 117 teeth. Suitable for Renault R4, R5, R12. Inside diameter: 22,2cm. Outside diameter: 24,7cm. Thickness: 0,8cm.

Quality: 3

R4/R5/R6/Caravelle, piston rings (engine 1108cc), for 1 piston. Bore: 70mm. Suitable for Renault R4, R5, R6, Caravelle. Piston rings: 2,0 + 2.0 + 3,5mm.

Quality: 2

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

R4/R5/R6/Caravelle, piston rings 70,0mm, for 4 pistons. Suitable for Renault R4, R5, R6, Caravelle. Engine capacity: 1108cc. Bore: 70,0mm. Piston rings: 1,75 + 2.0 + 3,5mm.

Quality: 2

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

R4/R5/R6/Floride/Dauphine, piston rings (engine 845cc, B1B), for 1 piston. Bore: 58mm. Suitable for Renault R4, R5, R6, Floride + Dauphine. Piston rings: 1,75 + 2.0 + 3,5mm.

Quality: 2

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €