Renault / R4 / front axle

4CV, rubber stop above, front axle (old version). Suitable for Renault 4CV. Or. Nr. 6052126

Quality: 3

4CV, rubber stop down, front axle (old version). Suitable for Renault 4CV.

Quality: 3

Multi-purpose grease, cartridge 400g, suitable for our lubricating gun.

Quality: 2

• Suitable for this article
• Grease gun, for lubricating grease cartridge. Hobby quality!
  23,71 €
• Lubricating gun small, 120cc. Optimally for on the way and difficult attainable lubrication nip
  18,74 €

Molybdenum universal grease in tube, 230g. High performance rolling bearing grease for lubricating wheel bearings, cardan joints etc.

Quality: 3

• Suitable for this article
• Lubricating gun small, 120cc. Optimally for on the way and difficult attainable lubrication nip
  18,74 €

Molykote grease in cartouche for lubricating gun. 400g (graphite grease). Heavy duty roller bearing grease for lubricating universal joints etc.. By the high proportion of Molykote is this grease also outstanding suitable for lubricating sliding fits from cardan shaft`s, ... Water-rejecting! Caution not for high-speed bearings (wheel bearings).

Quality: 3

• Suitable for this article
• Grease gun, for lubricating grease cartridge. Hobby quality!
  23,71 €
• Lubricating gun small, 120cc. Optimally for on the way and difficult attainable lubrication nip
  18,74 €

Grease cap for 160mm brake drum. Suitable for Renault R4, Caravelle, Floride, Dauphine and many other Renault. Front axle and rear axle. Overall height: 27mm. Outside diameter: 42mm. Or. No. 0607035200

Quality: 3

Grease gun, for lubricating grease cartridge. Hobby quality!

Quality: 4

• Suitable for this article
• Multi-purpose grease, cartridge 400g, suitable for our lubricating gun.
  6,34 €
• Molykote grease in cartouche for lubricating gun. 400g (graphite grease). Heavy duty roller bea
  8,32 €
• Lubricating grease, color red, 400g cartouche. Original one by TOTAL! Red lubricating grease wa
  7,93 €

Grease gun, for lubricating grease cartridge. Workshop quality from Liqui Moly!

Quality: 2

• Suitable for this article
• Multi-purpose grease, cartridge 400g, suitable for our lubricating gun.
  6,34 €
• Molykote grease in cartouche for lubricating gun. 400g (graphite grease). Heavy duty roller bea
  8,32 €
• Lubricating grease, color red, 400g cartouche. Original one by TOTAL! Red lubricating grease wa
  7,93 €

Crown nut M18x1,5. Low design. E.G. for ball pin Citroen HY. Or. No. ZC9441 178U

Quality: 3

Nut selflocking M10 x 1,25. Suitable for most ball joints at the front axle. Renault R4, R5, R6, R8, R10 etc.

Quality: 3

Nut selflocking M12 x 1,25. Suitable for most ball joints at the front axle. Renault R4, R5, R6, R8, R10 etc.

Quality: 3

R4, A-arm bush set, for both sides. Suitable for Renault R4.

Quality: 3

R4, fixture for the thrust strut bearing front on the left. Suitable for Renault R4. (Sheet metal holder to weld, substitute for defective plate)

Quality: 4

R4, fixture for the thrust strut bearing front on the right. Suitable for Renault R4. (Sheet metal holder to weld, substitute for defective plate)

Quality: 4

R4, wheel stud wheel hub, front + rear. Dimension: M10 x 1.25mm. Length: 31.50mm. Suitable for Renault R4, R5, R6. Or. No. 7700628765

Quality: 3

R4, wheel hub (wheel plate) front. Suitable for Renault R4, with front drum brake. Diameter: 180mm.

Quality: 3

Anti roll bar repair set, for 12mm metal sleeve. Suitable for Renault R4, R5. Includes: 2x clip, 2x rubber bush for clip, 2x suspension rubber outside (Metal sleeve = 51mm). Note: The rubber bush for fixture anti roll bar at the body has always about 15-16mm diameter

Quality: 3

R4, anti roll bar repair set, for 10mm anti roll bar. Suitable for Renault R4 + R5. Contents: 2x clip, 2x rubber bush for clip, 2x suspending rubber outside (metal sleeve length: 51mm). Note: The rubber bush for fixture anti roll bat at the body has always about 15-16mm diameter

Quality: 3

Quality: 3

• Suitable for this article
• Anti roll bar repair set, for 12mm anti roll bar. Suitable for Renault R4 + R5. includes: 2x cl
  27,67 €
• Anti roll bar repair set, for 12mm metal sleeve. Suitable for Renault R4, R5. Includes: 2x clip
  27,67 €

R4, anti roll bar rubber (per piece). Suitable for Remault R4. Securement the anti roll bar at the body! Have caution, the rubbers have 12mm inside diameters.

Quality: 3

R4, ball and socket joint down on the right. Suitable for Renault R4, of year of construction 1962 to 1968. Or. No. 0981724600 Made in Italy. Thread dimension: M12. The cone tapers from 12.5mm to 14mm. Overall length to the inside of the screw flat: 47mm. Overall length to outside of the screw flat: 52mm.

Quality: 3

• Suitable for this article
• R4/R5, ball and socket joint: Screw M6X1, length 20mm. Tensile strength 10.9 (as original) for
  0,79 €

R4, front axle mounting plate, front on the left. Suitable for Renault R4, starting from year of construction 1969. Or. No. 7700525702

Quality: 3

• Suitable for this article
• R4, front axle mounting plate, front on the right. Suitable for Renault R4, starting from year
  63,28 €

R4, front axle mounting plate, front on the right. Suitable for Renault R4, starting from year of construction 1969. Or. No. 7700525703

Quality: 3

• Suitable for this article
• R4, front axle mounting plate, front on the left. Suitable for Renault R4, starting from year o
  63,28 €

R4, front axle rubber set, for one side. Suitable for Renault R4. Contents: 3x bonded-rubber bushing, stabilizer bearing + bearing flange for thrust strut under the wishbone.

Quality: 3

R4/F4/F6, front axle stabiliser. Diameter: 16mm. Without fixing material. Suitable for Renault R4, R4 F4, R4 F6, R6. The 16mm stabilizer was originally only used for R4 F4 + R4 F6. However, it can be fitted to the saloons without any problems. The thicker stabiliser gives a slightly firmer ride. Mady in Europe

Quality: 3

R4/R5, wheel hub front (fine-tooths). Suitable for Renault R4 + R5, with front disc brake.

Quality: 3

R4/R5, thrust strut bearing. Suitable for Renault R4. Note: Only suitable for thrust strut with fork mounting. (Support of lower wishbones). Per piece. Or. No. 7700500113

Quality: 3

R4/R5, anti roll bar suspension point outside. Suitable for Renault R4 + R5. Diameter metal sleeve: 10,1mm. Metal sleeve lengthens: 32mm. Or. No. 7702003408

Quality: 3

R4/R5, anti roll bar suspension point outside. Suitable for Renault R4 + R5. Diameter metal sleeve: 10,1mm. Metal sleeve lengthens: 51mm. Or. No. 7702107984

Quality: 3

R4/R5, anti roll bar suspension point outside. Suitable for Renault R4 + R5. Diameter metal sleeve: 12,1mm. Metal sleeve lengthens: 32mm.

Quality: 3

R4/R5, anti roll bar suspension point outside. Suitable for Renault R4 + R5. Diameter metal sleeve: 12mm. Metal sleeve lengthens: 51mm. Or. No. 7702107985

Quality: 3 360°

R4/R5, Anti roll bar repair set, for 10mm anti roll bar. Suitable for Renault R4 + R5. Contents: 2x clip, 2x rubber bush for clip, 2x hanging up rubber outside. Metal sleeve length = 32 mm. Note: The rubber bush for fixture anti roll bar at the body has always about 15-16mm diameter

Quality: 3

Anti roll bar repair set, for 12mm anti roll bar. Suitable for Renault R4 + R5. includes: 2x clip, 2x rubber bush for clip, 2x suspension rubber outside (Metal sleeve = 32mm). Note: The rubber bush for fixture anti roll bar at the body has always about 15-16mm diameter

Quality: 3

R4/R5, anti roll bar fixture front (metal clip, without rubbers). Suitable for Renault R4 + R5. Per piece! Made in Germany.

Quality: 3

R4/R5, ball and socket joint lower on the left. Suitable for Renault R4 + R5. Installed from year of construction 1979 to 1992. Pin amount to area for screwing: 62mm. Thread height: 19mm. Thread measurement: M12 x 1,25.

Quality: 3

• Suitable for this article
• R4/R5, ball and socket joint lower on the right. Suitable for Renault R4 + R5. Installed from y
  23,71 €
• R4/R5, ball and socket joint: Screw M6X1, length 20mm. Tensile strength 10.9 (as original) for
  0,79 €

R4/R5, ball and socket joint lower on the right. Suitable for Renault R4 + R5. Installed from year of construction 1979 to 1992. Pin amount to area for screwing: 62mm. Thread height: 19mm. Thread measurement: M12 x 1,25. Or. No. 7701463687

Quality: 3

• Suitable for this article
• R4/R5, ball and socket joint lower on the left. Suitable for Renault R4 + R5. Installed from ye
  23,71 €
• R4/R5, ball and socket joint: Screw M6X1, length 20mm. Tensile strength 10.9 (as original) for
  0,79 €

R4/R5, ball and socket joint: Screw M6X1, length 20mm. Tensile strength 10.9 (as original) for the bolting of the suspension and guide joints on the front axle. Per piece.

Quality: 2

R4/R5/R6, wishbone (A-arm) on the left above. Suitable for Renault 4, from year of manufacture 1969. Renault R6. R5. Completely with ball pins + bonded-rubber bushings. Or. No. 832139900

Quality: 4

• Suitable for this article
• R4/R5/R6, wishbone (A-arm) on the right above. Suitable for Renault 4, from year of manufacture
  49,48 €

R4/R5/R6, wishbone (A-arm) on the right above. Suitable for Renault 4, from year of manufacture 1969. Renault R6. R5. Completely with ball pins + bonded-rubber bushings. Or. No. 832140000

Quality: 4

• Suitable for this article
• R4/R5/R6, wishbone (A-arm) on the left above. Suitable for Renault 4, from year of manufacture
  49,48 €

R4/R5/R6, bonded-rubber bushing front axle, for the inferior A-arm. Suitable for Renault R4, R5, R6. Internal dimension: 14 x 27mm. External dimensions: 45 x 40mm.

Quality: 3

R4/R5/R6, bonded-rubber bushing front axle. Suitable for Renault R4, R5, R6. Internal dimension: 12 x 26mm. Outside diameter 36,2mm. Construction length outside: 23mm.

Quality: 3

R4/R5/R6, ball and socket joint down on the left, for Renault R4 + R5, R6. Installed from year of construction 1968 to 1979. Pin height to area for screwing: 58mm. Thread height: 19mm. Thread measurement: M12 x 1,25. Or. No. 7701450635

Quality: 3

• Suitable for this article
• R4/R5/R6, ball and socket joint down on the right, for Renault R4 + R5, R6. Installed from year
  19,73 €
• R4/R5, ball and socket joint: Screw M6X1, length 20mm. Tensile strength 10.9 (as original) for
  0,79 €

R4/R5/R6, ball and socket joint down on the right, for Renault R4 + R5, R6. Installed from year of construction 1968 to 1979. Pin height to area for screwing: 58mm. Thread height: 19mm. Thread measurement: M12 x 1,25. Or. No.: 7701450637

Quality: 3

• Suitable for this article
• R4/R5/R6, ball and socket joint down on the left, for Renault R4 + R5, R6. Installed from year
  20,73 €
• R4/R5, ball and socket joint: Screw M6X1, length 20mm. Tensile strength 10.9 (as original) for
  0,79 €

R4/R5/R6/R16, ball and socket joint above, for Renault R4, R5, R6. On the left + on the right fitting. Installed starting from year of construction 1969. Renault R16 Installed of year of construction 9/1965 to 8/1980. Renault R12 starting from year of construction 1969. Original quality. Pin height to area for screwing: 55mm. Thread measurement: M10 x 1,25. Or. No. Or. Nr. 0996064400

Quality: 3

• Suitable for this article
• R4/R5, ball and socket joint: Screw M6X1, length 20mm. Tensile strength 10.9 (as original) for
  0,79 €

R4/R6, A-arm bush set, for one side! Suitable for Renault R4 + R6. Suitable left or on the right. Contents: 3 bonded-rubber bushing, nuts, disks.

Quality: 3

Wishbone on the right above. Suitable for Renault R4 + R6. Installed from year of construction 1969 to 1984. Completely with ball joint (ball pin) and bonded-rubber bushings. Original Renault, no reproduction! Or. No. 0832140000

Quality: 0 360°

R4/R6, thrust struts bearing, suitable for Renault R4. Note: Only suitable for thrust strut with unilateral securement. (Support of lower wishbones). Per piece. Or. No. 7702108305

Quality: 3

R4/R6, bonded-rubber bushing front axle, for the upper A-arm. Suitable for Renault R4 + R6. Internal dimension 12 x 27. External dimensions: 26 x 23mm.

Quality: 3

Wheel bearing spacer sleeve front. Suitable for Renault R4 (disc brake + front drum brake). Or. No. 7705001169.

Quality: 3

Lubrication nipple cap from synthetic. Color: Red.

Quality: 1