Renault / R4 / Cylinder head

Label with 3 devil. Suitable for Renault R3 (R3 with 3CV). This label was mounted on the valve cap.

Quality: 3

Exhaust valve. Diameter: 29,0mm. Shank: 7,0mm. Construction length: 89,0mm. Suitable for Renault R4 (1.0 + 1,1L). Renault R5 + R8. Or. No. 770068247

Quality: 3

• Suitable for this article
• Inlet valve. Diameter: 33,5mm. Shank: 7,0mm. Construction length: 89,8mm. Suitable for Renault
  9,32 €
• Valve stem seal, suitable for inlet and exhaust (8 fittings). For engine: 852ccm, 955ccm, 956cc
  13,78 €

Exhaust valve. Suitable for Renault R4, Dauphine, Floride. Engines: B1A + B1B, 845cc. Diameter: 25,0mm. Overall height: 73,8mm. Valve stem: 7,0mm.

Quality: 3

• Suitable for this article
• Inlet valve. Suitable for Renault R4, Dauphine, Floride. Engines: B1A + B1B, 845cc. Diameter: 2
  9,21 €
• Valve stem seal, suitable for inlet and exhaust (8 fittings). For engine: 852ccm, 955ccm, 956cc
  13,78 €

Inlet valve. Diameter: 33,5mm. Shank: 7,0mm. Construction length: 89,8mm. Suitable for Renault R4 (1.0 + 1,1L). Renault R5 + Twingo. Or. No. 7701458180

Quality: 3

• Suitable for this article
• Exhaust valve. Diameter: 29,0mm. Shank: 7,0mm. Construction length: 89,0mm. Suitable for Renaul
  10,81 €
• Valve stem seal, suitable for inlet and exhaust (8 fittings). For engine: 852ccm, 955ccm, 956cc
  13,78 €

Inlet valve. Suitable for Renault R4, Dauphine, Floride. Engines: B1A + B1B, 845cc. Diameter: 28,2mm. Overall height: 73mm. Valve stem: 7,0mm. Suitable valve spring cotter = 81064

Quality: 3

• Suitable for this article
• Exhaust valve. Suitable for Renault R4, Dauphine, Floride. Engines: B1A + B1B, 845cc. Diameter:
  10,81 €
• Valve stem seal, suitable for inlet and exhaust (8 fittings). For engine: 852ccm, 955ccm, 956cc
  13,78 €
• Valve spring cotter inlet valve (1 slot). Suitable for Renault R4.
  2,36 €

Fiber washer seal for the connector of the valve cap. Suitable for Renault R4, Renault with rear engine, Estafette, R5, R16. M8x12x1,0mm.

Quality: 3

M7, stud bolt for 2CV, DS, R4. Measurement: 38mm. (e.g. elbow spider on cylinder head 2CV).

Quality: 3

• Suitable for this article
• copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copp
  1,46 €

Stud bolt M7 on M8. 45mm lengths. Special production!

Quality: 2

• Suitable for this article
• copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copp
  1,46 €

Stud bolt M8 on M10. 38mm lengths. Special production!

Quality: 2

• Suitable for this article
• M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €
• M8, copper nut M8, for 13mm tool. Universal suitable e.g. for exhausts + exhaust manifolds.
  0,88 €

Push rod (per piece), suitable for Renault R4, Dauphine, 4CV. Length: 129mm. Shank diameter: 6,9mm.

Quality: 4

Valve cover gasket, suitable for Renault R4, R5. For engines with 747 + 782 + 845cc. Dimension: About 345 x 93mm.

Quality: 2

• Suitable for this article
• Fiber washer seal for the connector of the valve cap. Suitable for Renault R4, Renault with rea
  0,40 €

Valve cover gasket. For engines with 852cc, 955cc, 956cc, 1108cc. Suitable for Renault R4, R5, R6, R8, R10, R12, Estafette. Material: Rubber.

Quality: 2

• Suitable for this article
• Fiber washer seal for the connector of the valve cap. Suitable for Renault R4, Renault with rea
  0,40 €

Valve clearance gauge. 0,05 > 1,00mm. Precision - feeler gage with conical lamellas

Quality: 3

Valve spring set (8 item). Suitable for Renault 4CV, Dauphine, R4 small engine (to 845ccm). Diameter: 22mm. Length: 38mm

Quality: 3

Valve guide inlet + exhaust. Suitable for Renault with rear engine (Dauphine, Floride). Renault R4. Inside diameter: 7,00mm. Outside diameter: 11,12mm. Length: 35mm.

Quality: 3

Valve guide inlet + exhaust. Suitable for Renault R4, R5, R6, R8, R10. Inside diameter: 7,0mm. Outside diameter: 11,15mm. Length: 41,4mm.

Quality: 2

Valve guide for inlet + exhaust. Suitable for Renault R4, Dauphine, Floride. Engine: 782 + 845cc. Length: 34,0mm. Inside diameter: 7,0mm.

Quality: 3

Valve spring cotter inlet valve (1 slot). Suitable for Renault R4.

Quality: 3

Valve stem seal, suitable for inlet and exhaust (8 fittings). For engine: 852ccm, 955ccm, 956ccm, 1108ccm. Suitable for Renault R4, R5, R8, Estafette. Outside diameter: 13,2mm. Amount: 10mm. Inside diameter: 7,0mm.

Quality: 2

Valve stem seal, suitable for inlet and exhaust (per piece). For engine: 747ccm, 782ccm, 845ccm. Suitable for Renault R4, R5, Dauphine. Outside diameter: 14,2mm. Amount: 10mm. Inside diameter: 8,0mm.

Quality: 2

Cylinder head screw set (10 fittings). Thread: M10 x 100. Suitable for Renault R4 (1,0+1,1L). R5, Estafette (1,3L), Twingo.

Quality: 2