Other-Citroen / XM / special tools for motor vehicles

Exhaust pipe cutter, for 28 to 67mm diameter. The pipe cutter has a ratchet function. Cutting depth up to 3mm.

Quality: 3

• Suitable for this article
• Exhaust pipe cutter: Cutting wheel as replacement for pipe cutter 20940
  12,79 €

Exhaust pipe cutter: Cutting wheel as replacement for pipe cutter 20940

Quality: 3

Exhaust tubingfar tool. For diameter 29 - 44mm. Only for tubing strengths upto max. 1,5mm. Not for high-grade steel pipes suitable. The exhaust pipe must be heated before processing! The tool must be introduced completely!

Quality: 3 360°

Exhaust tubingfar tool. For diameter 38 - 64mm. Only for tubing strengths upto max. 1,5mm. Not for high-grade steel pipes suitable. The exhaust pipe must be heated before processing! The tool must be introduced completely!

Quality: 3 360°

Autoskop, for the search for abnomal vibrations or liquid leakage. Delivery with one sensing head

Quality: 3

Battery Service Screwdriver (for the caps of the battery cells). Indispensable! Finally a tool that fits and not always a too narrow screwdriver that destroys the caps. Length: approx. 100mm.

Quality: 1

Battery terminals cleaning + milling cross. Indispensable for vintage cars! Trim once, and the electrical contact is back in order.

Quality: 3

Mini Dent Puller. This mini suction puller its strong pulling power is ideal for minor car panel dents. 55mm diameter suction disc. Can be used in pairs if necessary provides strong pulling power.

Quality: 1

Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and aluminum lines. Bends up to 90°. Suitable for pipe Ø: 3/16 " (4,75mm), 1/4 " (6,35mm), 5/16 " (7,93mm), 3/8 (9.52mm).

Quality: 3

Accelerator and Brake Pedal depressor. Convenient tool for one-man operations. For depressing the brake pedal, e.g. wheel alignment jobs, checking brake lights or trailor brakes. For depressing the accelerator, e.g. setting the engine spped or measuring omissions. 1 men operation. Finely adjustable, with high-speed release function!

Quality: 3

Brake line wrench. 10mm + 11mm. Workshop quality.

Quality: 3

• Suitable for this article
• Brake line wrench. 8mm + 9mm. Workshop quality.
  8,88 €

Brake line wrench. 8mm + 9mm. Workshop quality.

Quality: 3

• Suitable for this article
• Brake line wrench. 10mm + 11mm. Workshop quality.
  8,88 €

Drum spring draw hook from HAZET. Extremely helpfully.

Quality: 2

CO tester (exhaust tester). Digitally. Optimally for the experienced mechanician, in order to adjust the carburetor. We use it since years for our classic cars! English operating instructions are attached. For the language German, Dutch, Spanish, Italian, French can be down-load the operating instructions of our homepage.

Quality: 3 Pdf

Roundings/minute-Indicator (laser).Very easy to use: just select a level and confirm to . Ideal for engine adjustment!

Quality: 3

pressure spray gun cavity with hook and cavity nozzle, incl. pre-heating device for Mike Sander grease

Quality: 3

• Suitable for this article
• Semi-fluid grease 4kg, for preserving the cavity, Mike Sander - corrosion inhibitor !
  72,29 €
• Semi-fluid grease 750g, for preventing the cavity, Mike Sanker - corrosion inhibitor
  18,79 €
• Cavity preservation on wax basis, for cavity pistol, 1 litre.
  19,73 €
• Fertan rust converter, 1 litre, Fertan the market leader with rust-converting primer!
  42,54 €

Rivet nut assortment made of aluminium. Consisting of: 40x M3, 35x M4, 25x M5, 25x M6, 15x M8, 10x M10. Rivet nuts are ideal for creating a thread in sheet metal. A typical example is the mirror assembly on the doors or on the fenders (often the old threads are worn out or torn out). You will find the suitable riveting pliers under the number 21082.

Quality: 3

• Suitable for this article
• Rivet nut pliers for M3, M4, M6, M8. With 2 lever arms (2 hand operation) for relatively easy i
  69,32 €

Rivet nut pliers for M3, M4, M6, M8. With 2 lever arms (2 hand operation) for relatively easy insertion of rivets with optimum force transmission. You will find a suitable range of aluminium rivet nuts under our number 21083. Rivet nuts are ideally suited for creating a thread in sheet metal. A typical example is the mirror assembly on the doors or on the fenders (often the old threads are worn out or torn out).

Quality: 3

• Suitable for this article
• Rivet nut assortment made of aluminium. Consisting of: 40x M3, 35x M4, 25x M5, 25x M6, 15x M8,
  19,73 €

Lubricating gun small, 120cc. Optimally for on the way and difficult attainable lubrication nipples!

Quality: 3

Grease gun, for lubricating grease cartridge. Hobby quality!

Quality: 4

• Suitable for this article
• Multi-purpose grease, cartridge 400g, suitable for our lubricating gun.
  6,34 €
• Molykote grease in cartouche for lubricating gun. 400g (graphite grease). Heavy duty roller bea
  8,32 €
• Lubricating grease, color red, 400g cartouche. Original one by TOTAL! Red lubricating grease wa
  7,93 €

Grease gun, for lubricating grease cartridge. Workshop quality from Liqui Moly!

Quality: 2

• Suitable for this article
• Multi-purpose grease, cartridge 400g, suitable for our lubricating gun.
  6,34 €
• Molykote grease in cartouche for lubricating gun. 400g (graphite grease). Heavy duty roller bea
  8,32 €
• Lubricating grease, color red, 400g cartouche. Original one by TOTAL! Red lubricating grease wa
  7,93 €

Antifreeze Coolant Tester Dial Type

Quality: 3

• Suitable for this article

szction pump (hand pump) for eG fuel, hydraulic liquid

Quality: 3

Thread Repair Kit M7x1, for repairing damaged threads. For plating threads in materials with low shearing strength 1 twist drill, 1 tap, 1 installation tool, 1 tang breaker, 25 x M7x1 coil.

Quality: 3

Heli coil spark plug thread repair set. For all M14 spark plugs. Contents: 1 bore + cutting tool, installation spindle. 10x heli coil insert M14x1,25x17,5. (Spark plugs with long threads). 10x heli coil insert M14x1,25x12,7. (Spark plugs with short threads, 2CV, R4).

Quality: 2

Hone segment 100x10mm (3 fittings) for engine cylinder hone 20918.

Quality: 2

Hone segment 30x4mm (2 fittings) for brake cylinder hone 20916.

Quality: 3

Hydraulic line and Brake line flaring tool for use at the vehicle! For all lines with 3,5mm, 4,5mm + 6,35mm (1/4 "). (Citroen)

Quality: 1 Pdf

• Suitable for this article
• Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and aluminum lines.
  24,40 €

Hydraulic line Brake line flaring tools for use at the vehicle (to use at the car). For all flanging! For all Citroen lines with 3,5mm, 4,5mm + 6,35mm (1/4 "). For all lines after DIN/CSAE, for flanges of the types CD, E, F, F180 in the usual quantities 4,75mm, 6mm, 8mm, 9mm and 10mm.

Quality: 1 Pdf

• Suitable for this article
• Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and aluminum lines.
  24,40 €

Brake line flaring tool, for brake and hydraulic lines. Particularly for Citroen connectors. With thrust pieces for 3,5mm + 4,5mm lines (8,0mm + 9,0mm Clinch screws).

Quality: 3 360°

• Suitable for this article
• Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and aluminum lines.
  24,40 €

piston ring presenting pliers for diameter 40-100.

Quality: 3

Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).

Quality: 3 360°

piston ring compressor from 60 up to 125mm, workshop quality (HAZET)

Quality: 2

Clutch Alignment Tool, Universal. For single plate clutches. Suitable for flywheels with or without pilot bearing. Fast to fit and remove. Universal applications. Size of collets: 14mm to 28mm across 3 adaptors. Cone size range from 35mm < 67mm (for almost all classical french cars)

Quality: 1

Box for clip band (Ligarex)

Quality: 2 Video

• Suitable for this article
• Ligarex strap, bellows clip strap of 25 meters, 5mm wide one.
  18,79 €

Ligarex strap, bellows clip strap of 50 meters. 5mm wide one.

Quality: 2 Video

• Suitable for this article
• Ligarex strap, locks for the clip strap (100 fittings).
  9,87 €
• Box for clip band (Ligarex)
  39,57 €

Ligarex strap, locks for the clip strap (100 fittings).

Quality: 2 Video

• Suitable for this article
• Ligarex, specially pliers for clip strap (bellow straps). This securement was used at many Fren
  79,23 €
• Ligarex strap, bellows clip strap of 25 meters, 5mm wide one.
  18,79 €

Ligarex, specially pliers for clip strap (bellow straps). This securement was used at many French classic cars, for all kind of hose securement, like radiator hoses, collars, rubber bellows of the heating etc. With Ligarex you re-establish the original optics and you have always the suitable length in the workshop!

Quality: 2 Video

• Suitable for this article
• Ligarex strap, locks for the clip strap (100 fittings).
  9,87 €
• Ligarex strap, bellows clip strap of 25 meters, 5mm wide one.
  18,79 €

Ligarex strap, bellows clip strap of 25 meters, 5mm wide one.

Quality: 2 Video

• Suitable for this article
• Ligarex, specially pliers for clip strap (bellow straps). This securement was used at many Fren
  79,23 €
• Ligarex strap, locks for the clip strap (100 fittings).
  9,87 €

Drilling tool set in the wood stand. Equipped with ever drilling tools a 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm.

Quality: 3

Release lever set from synthetic for door linings, trim etc., 5 pieces

Quality: 3

Magnetic lifter flexible + washing nozzles adjustment tool. This magnet lifter can be extended up to 592mm and is flexible at the end. Also the nut in the intake tract far behind is brought out with it again! Additionally it has a steel needle in the handle, with which washing nozzles can be adjusted.

Quality: 1

Magnetic bowl, stainless steel bowl with magnetic base and soft rubber shell. Very useful to collect small parts! 150 mm diameter

Quality: 3

Oil absorbent pad. Extremely absorbent. Dimension: 51x38cm. For oils and brake fluids. Attention, the pads do not suck and absorb water! Your wife will be grateful!

Quality: 1

Oil filter tool (76mm inside diameter) , particularly for PURFLUX oil filter with 6 or 12 slots. (Citroen 2CV)

Quality: 2

Tool universal for oil filtre, fits for all oil filter, also to remove spheres!

Quality: 2

Wheel Stud Restorer Kit. For repairing damaged wheel stud threads using a reverse action to ensure the alignment of the thread. Includes adaptor sizes: M12 x 1.25mm. M12 x 1.5mm. M14 x 1.5mm.

Quality: 1

Pipe cutting equipment for brake hoses!

Quality: 3

Discs (windscreen) Pull-in tool (cord with handle). This is used to pull the rubber lip of the seal over the sheet metal fold. Very helpful!

Quality: 3

Windscreens (windscreen) piping assembly tool - bracket inserts. For small piping. There are 5 brackets in different widths so that narrow and wide piping can be fitted (e.g. for the 2CV, R4....). Suitable for tool with item number 20134.

Quality: 3