Renault / R16 / intake and exhaust manifold

Seal intake manifold (per piece). Suitable for Renault R16 (R1151, 1154). R12 (1.6 Gordini). R15 + R17. Fuego (1,6L). Or. No. 0857720900

Quality: 2

Seal intake manifold (per piece). Suitable for Renault R16 1,6/TS/TX. Renault R15 + R17 (1.6 L engine). Fuego (1,6L). Or. No. 0857720800

Quality: 2

Seal exhaust elbow. Suitable for Renault R16 (R1151, 1154). R12 (1.6 Gordini). R15 + R17. Fuego (1,6). Or. No. 7700501840

Quality: 2

Seal Y-pipe. Suitable for Renault R16 (R1151, 1154). R12 (1.6 Gordini). R15 + R17. Fuego (1,6L). Peugeot 505,2.0 TI/STI + 2.2 GTI. Or. No. 7700657683 + 7701036761

Quality: 2

Seal manifold for inlet + exhaust. Suitable for Renault R16 (R1152, 1153, 1157). R12 (1.6 Gordini R1173).

Quality: 2

copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copper nuts: no rust, no sticking!

Quality: 2

M8, copper nut M8, for 13mm tool. Universal suitable e.g. for exhausts + exhaust manifolds.

Quality: 3

M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.

Quality: 3

M8, nut for 12mm wrenche. (Metal) (e.g. carburetor on intake manifold 2CV).

Quality: 3

Stud bolt M7 on M8. 45mm lengths. Special production!

Quality: 2

• Suitable for this article
• copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copp
  1,46 €

M7, stud bolt M7x28. (e.g. screening plate on manifold Citroen DS). Or. No. ZC9616135W

Quality: 3

• Suitable for this article
• copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copp
  1,46 €

Stud bolt M7x43mm (thread M7x1). This stud bolt are installed, for example, at the exhaust elbow with Citroen 15CV. Elbow pipe Citroen DS, etc. Universally fitting!

Quality: 3

• Suitable for this article
• copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copp
  1,46 €

Stud bolt M8 on M10. 38mm lengths. Special production!

Quality: 2

• Suitable for this article
• M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €
• M8, copper nut M8, for 13mm tool. Universal suitable e.g. for exhausts + exhaust manifolds.
  0,88 €

stud bolt M8x35

Quality: 3

• Suitable for this article
• M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €

Stud bolt M8x45, e.g. elbow securement Citroen DS.

Quality: 3

• Suitable for this article
• M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €

stud bolt M8x55

Quality: 3

• Suitable for this article
• M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €

stud bolt M8x62

Quality: 3

Seal under carburetor (insulating plate between carburetor and intake manifold). Suitable for Renault R12, R15, R16. Diameter: 20,5mm. Attachment holes: 50mm.

Quality: 3