Der Franzose Automobiltechnik GmbH - www.franzose.de
Cart
Deutsch Englisch Französisch
Sichere Zahlöungen mit mollie

Renault / rear-engined vehicle / engine cooling

73 Articles | Page 1 of 2
Shipping country Shipping country
Water pump Renault Caravelle, Floride S, R8, R10. Or. No. 7701457447. Caution: The Renault have an open cooling system. It is essential to check if the radiator cap is the right one ! The water pump can evacuate some cooling water through a small opening. New water pumps need approx. 500 km to 1000 km to get at 99,5 % leakproof. It is just normal to see some drops of water on the water pump!

Quality: 3

Water pump Renault Floride, Dauphine. New part. Or.Nr.9806440. Caution: The Floride + Dauphine has an open cooling system. It is essential to check if the radiator cap is the right one ! The water pump can evacuate some cooling water through a small opening. New water pumps need approx. 500 km to 1000 km to get at 99,5 % leakproof. It is just normal to see some drops of water on the water pump!

Quality: 3

Freeze protection "GLACELF PLUS" concentrate from Total (must be mixed with distilled water). Suitable for classical engines, which have also aluminum and or copper components (radiator, cylinder head..). Reliable protection against rust, corrosion, foam formation and cavitation. This freeze protection is on basis of monoethylglycol with silicates. Mixing ratio: 50% freeze protection + 50% distilled water. Attention: This is a new antifreeze from TOTAL, which replaces the antifreeze "GLACEELF Plus" (CLACELF contains borates, which is no longer permitted in the EU). The two antifreezes cannot be mixed. It is necessary to refill and rinse with "ECO BS"!

Quality: 2

Degreaser for radiator. For cleaning and degreasing of copper and aluminium radiators. Use: mix 1 kg degreaser in 10 liters warm water. After draining of cooling water fill in radiator with degreasing water: After driving (1-2 days)please drain degreasing water and flush the cooling system with hot water before refilling it. Caution: the cleaning process may uncover some leakages!

Quality: 1

Descaling agent for radiators. For decalcifying of copper and aluminium radiators. Use: mix 1 kg softening agent in 10 liters warm water. After Draining of cooling water fill in radiator with decalcifying: After driving (1-2 days)please drain softening agent water and flush the cooling system with hot water before refilling it. Caution: the cleaning process may uncover some leakages!

Quality: 1

Radiator Fin Straightener. Designed for straightening fins and removing debris from vehicles radiators and air conditioning condensers. One tool with 6 different combs works on any vent or grill. The use of this tool allows the radiator or air conditioning grill to work correctly. Also use on air conditioning grills. Also suitable for oil and water radiators/condensers and evaporators

Quality: 1 360°

Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band with raised edges. This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

Quality: 1

Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band with raised edges. This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

Quality: 1

Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band with raised edges. This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

Quality: 1

Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band with raised edges. This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

Quality: 1

Hose clamp 22-32mm, especially for radiator hose. Vintage look. Embossed band with raised edges. This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

Quality: 1

73 Articles | Page 1 of 2
Shipping country Shipping country