Renault / Estafette / Cylinder head

Exhaust valve. Suitable for Renault R4, Dauphine, Floride. Engines: B1A + B1B, 845cc. Diameter: 25,0mm. Overall height: 73,8mm. Valve stem: 7,0mm.

Quality: 3

• Suitable for this article
• Inlet valve. Suitable for Renault R4, Dauphine, Floride. Engines: B1A + B1B, 845cc. Diameter: 2
  9,21 €
• Valve stem seal, suitable for inlet and exhaust (8 fittings). For engine: 852ccm, 955ccm, 956cc
  13,78 €

Inlet valve. Suitable for Renault R4, Dauphine, Floride. Engines: B1A + B1B, 845cc. Diameter: 28,2mm. Overall height: 73mm. Valve stem: 7,0mm. Suitable valve spring cotter = 81064

Quality: 3

• Suitable for this article
• Exhaust valve. Suitable for Renault R4, Dauphine, Floride. Engines: B1A + B1B, 845cc. Diameter:
  10,81 €
• Valve stem seal, suitable for inlet and exhaust (8 fittings). For engine: 852ccm, 955ccm, 956cc
  13,78 €
• Valve spring cotter inlet valve (1 slot). Suitable for Renault R4.
  2,36 €

Fiber washer seal for the connector of the valve cap. Suitable for Renault R4, Renault with rear engine, Estafette, R5, R16. M8x12x1,0mm.

Quality: 3

Stud bolt M7 on M8. 45mm lengths. Special production!

Quality: 2

• Suitable for this article
• copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copp
  1,46 €

Stud bolt M8 on M10. 38mm lengths. Special production!

Quality: 2

• Suitable for this article
• M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €
• M8, copper nut M8, for 13mm tool. Universal suitable e.g. for exhausts + exhaust manifolds.
  0,88 €

Valve cover gasket. For engines with 852cc, 955cc, 956cc, 1108cc. Suitable for Renault R4, R5, R6, R8, R10, R12, Estafette. Material: Rubber.

Quality: 2

• Suitable for this article
• Fiber washer seal for the connector of the valve cap. Suitable for Renault R4, Renault with rea
  0,40 €

Valve cover gasket. Suitable for Renault R5 (1289cc + 1397cc). Renault 6 (1108cc). R5 Super (1237cc + 1397cc). Estafette (1289cc).

Quality: 2

Valve clearance gauge. 0,05 > 1,00mm. Precision - feeler gage with conical lamellas

Quality: 3

Valve guide for inlet + exhaust. Suitable for Renault R4, Dauphine, Floride. Engine: 782 + 845cc. Length: 34,0mm. Inside diameter: 7,0mm.

Quality: 3

Valve stem seal, suitable for inlet and exhaust (8 fittings). For engine: 852ccm, 955ccm, 956ccm, 1108ccm. Suitable for Renault R4, R5, R8, Estafette. Outside diameter: 13,2mm. Amount: 10mm. Inside diameter: 7,0mm.

Quality: 2

Cylinder head screw set (10 fittings). Thread: M10 x 100. Suitable for Renault R4 (1,0+1,1L). R5, Estafette (1,3L), Twingo.

Quality: 2