Renault / Alpine / tools generally

Torque wrench largely, 40-200Nm. 1/2 " mounting. Professional quality

Quality: 3

Torque wrench small, 5-25Nm. 1/4 " mounting. Only for screws with right-hand thread suitably (torsion in in the clockwise direction).

Quality: 3

Tap drill M10x1. (M10x1 was very often used with brake hoses). Manual cut tap drill!

Quality: 3

• Suitable for this article

Manual cut tap drill M11x1

Quality: 3

• Suitable for this article

Thread tap M7 x 1,00. Hobby quality

Quality: 4

thread tap M7x1.00 DIN 352 HSS, top quality

Quality: 3

• Suitable for this article

thread drilling M9 x 1,00

Quality: 3

• Suitable for this article

Thread tap M9 x 1,25. Hobby quality

Quality: 4

Screw gauge metric + Whitworth. Angle of pressure 60° with 24 upward gradients 0,25-6mm. Angle of pressure 55° with upward gradients 4-62 gear on 1 ".

Quality: 3

Hook set 135mm long. 4 fittings, optimally for O-rings, seals, Citroen brake hose seals etc. Contents: 1x straight line hook, 1x 90° hook, 1x hook point, 1x awl.

Quality: 3

Ratchet adapter (enlargement). From 1/4 ratchet to 3/8 socket wrench.

Quality: 3

• Suitable for this article
• Ratchet adapter (enlargement). From 3/8 ratchet to 1/2 socket wrench.
  22,71 €

Ratchet adapter (enlargement). From 3/8 ratchet to 1/2 socket wrench.

Quality: 3

• Suitable for this article
• Ratchet adapter (enlargement). From 1/4 ratchet to 3/8 socket wrench.
  18,74 €

M7 die nut (male thread cutter). Lead of thread 0,75. Workshop quality

Quality: 3

M7 x 1,00 male thread cutter (die nut M9x1,25)

Quality: 4

M9 x 1,25 male thread cutter (die nut M9x1,25)

Quality: 4

Open-end spanner - ring spanner set (8 pieces) for inch thread (1/8 - 9/16 Withworth). Many brake parts on French classic cars often have an inch thread!

Quality: 3

Multimeter digital. Dimension: 74x145x40mm. Measuring range: Volt direct current + alternating current. Ampere, resistance, continuity tester. Everything what you need, for car electrical connection.

Quality: 1

Oil can with pump, made of sheet metal, blue painted, optic like in former times, 125 ccm content,

Quality: 3

Test lamp for car, 6-24 V.

Quality: 3

Scraper spare blades for 20484 (5 St)

Quality: 3

• Suitable for this article
• Scrapers professional version, to remove of labels on disks, engine sealing remainders scrape
  16,76 €

Scrapers professional version, to remove of labels on disks, engine sealing remainders scrape etc. off.

Quality: 3 360°

• Suitable for this article
• Scraper spare blades for 20484 (5 St)
  6,84 €

Soda, blasting abrasive, 5KG jerrycan, suitable for our mineralic blast gun 21155.

Quality: 3

• Suitable for this article
• Sodium carbonate ( Soda) blast gun. Washing soda is an effectiv procedure to remove paint and
  89,16 €

Sodium carbonate ( Soda) blast gun. Washing soda is an effectiv procedure to remove paint and surface rust without harming the support material. It don`t cause any damage of rubber , glas or plastic, so a complicated covering is not neccessary. In opposite to sandblast, Soda protects the cleaned material against rust at once. Enviroment friendly and gently removal from different coatings on boats, wooden furniture, glas and window frames is possible. This blast gun is not suitable for sandblast usage. Operating pressure is 87-174 lbs. Minimum air consumption is 180 liter/minute at 120 lbs.

Quality: 3

• Suitable for this article
• Soda, blasting abrasive, 5KG jerrycan, suitable for our mineralic blast gun 21155.
  42,54 €

Mirror flexibly, with joint. 360mm lengthens. Mirror diameter 30mm.

Quality: 3

Steering rod separating fork, workshop quality

Quality: 3

Underbody coating nozzle (gun) + cavity preservation nozzle (gun), for 1 liter of doses, very high quality.

Quality: 3

• Suitable for this article
• Cavity preservation on wax basis, for cavity pistol, 1 litre.
  19,73 €
• Underbody coating + stone guard to squirt, for underbody protection pistol. 1000ml
  13,78 €
• stone guard MOTIP, colour grey for spray gun, 1000ml
  15,77 €

Spark gap measurement (testing) tool. With the help of this small, inexpensive tool, the spark gap of the spark plug can be checked very easily and safely. So, if the engine does not start: Is the spark plug sparking at all! And if so, how strong! Then exclusion procedure: Ignition OK? It is not getting any petrol!

Quality: 3

Tap drill M14x1,25. (Spark plug threads).

Quality: 3

• Suitable for this article