Peugeot / 504 + 604 / brake lines + accessories, yard goods, universal

Flange screw 3/8x24UNF for 5mm line. Length + wide ones over everything: 10 x 18mm

Quality: 3

Flange screw 3/8x24UNF for 5mm line. Length + wide ones over everything: 14 x 17,5mm

Quality: 3

Flange screw M10x1 for 5mm line. Length + wide ones over everything: 11 x 16,7mm

Quality: 3

Clinch screw. F-flange. Thread: 3/8 x 24UNF. Wrench: 11mm. Suitable for Renault 4, R8, R10, Floride. Peugeot etc.

Quality: 3

Brake + hydraulic line. Diameter: 4,75mm (3/16 inch). Length: 5m. Material: Kunifer (copper - nickel alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!

Quality: 3 Pdf

• Suitable for this article
• Hydraulic line Brake line flaring tools for use at the vehicle (to use at the car). For all fla
  524,59 €
• Pipe cutting equipment for brake hoses!
  8,83 €
• Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and aluminum lines.
  24,40 €

Brake + hydraulic line. Diameter: 6mm. Length: 5,0 meter. Material: Kunifer (copper - nickel alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!

Quality: 3 Pdf

• Suitable for this article
• Hydraulic line Brake line flaring tools for use at the vehicle (to use at the car). For all fla
  524,59 €
• Pipe cutting equipment for brake hoses!
  8,83 €

Brake + hydraulic line. Diameter: 6,35mm. Length: 5,0 meter. Material: Kunifer (copper - nickel alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!

Quality: 3 Pdf

• Suitable for this article
• Hydraulic line Brake line flaring tools for use at the vehicle (to use at the car). For all fla
  524,59 €
• Pipe cutting equipment for brake hoses!
  8,83 €
• Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and aluminum lines.
  24,40 €
• Brake line + hydraulic line connector, for lines with 6,35mm diameter. Suitable for Citroen 2CV
  9,18 €
• Clinch screw, for 6.35mm hydraulic pipe. Thread: 12x1,25mm.
  2,88 €

Brake + hydraulic line. Diameter: 7,95mm (5/16 inch). Length: 5 meter. Material: Kunifer (copper - nickel alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!

Quality: 3 Pdf

• Suitable for this article
• Hydraulic line Brake line flaring tools for use at the vehicle (to use at the car). For all fla
  524,59 €
• Pipe cutting equipment for brake hoses!
  8,83 €

Brake fluid DOT4. 1 liter. Manufacturer ATE. Suitable for all Citroen 2CV to year of construction 1981 (vehicles with drum brake in front). Citroen 11CV, HY. All Peugeot and Renault models.

Quality: 2

Brake fluid DOT4. 1/2 liter. Manufacturer TOTAL. Suitable for all Citroen 2CV to year of construction 1981 (vehicles with drum brake in front). Citroen 11CV, HY. All Peugeot and Renault models.

Quality: 2

Brake fluid DOT4. 5,0 liter can. Manufacturer TOTAL. Suitable for all Citroen 2CV to year of construction 1981 (vehicles with drum brake in front). Citroen 11CV, HY. All Peugeot and Renault models.

Quality: 2

Brake line wrench. 10mm + 11mm. Workshop quality.

Quality: 3

• Suitable for this article
• Brake line wrench. 8mm + 9mm. Workshop quality.
  8,88 €

Brake line wrench. 8mm + 9mm. Workshop quality.

Quality: 3

• Suitable for this article
• Brake line wrench. 10mm + 11mm. Workshop quality.
  8,88 €

Tap drill M10x1. (M10x1 was very often used with brake hoses). Manual cut tap drill!

Quality: 3

• Suitable for this article

Manual cut tap drill M11x1

Quality: 3

• Suitable for this article

Hook set 135mm long. 4 fittings, optimally for O-rings, seals, Citroen brake hose seals etc. Contents: 1x straight line hook, 1x 90° hook, 1x hook point, 1x awl.

Quality: 3

Hydraulic + brake pipe handle made of metal. The fixture has a rubber lining and is to attach. Suitable for 3,5mm line.

Quality: 3

Hydraulic + brake pipe handle made of metal. The fixture has a rubber lining and is to attach. Suitable for 4,5mm line.

Quality: 3

Hydraulic + brake pipe handle made of metal. The fixture has a rubber lining and is to attach. Suitable for 6,35mm line.

Quality: 3

Hydraulic + brake pipe handle made of metal. The fixture has a rubber lining and is to attach. Suitable for 8,0mm line.

Quality: 3

Hydraulic + brake pipe handle to attach, from synthetic. Suitable for 3,75mm line.

Quality: 3

Hydraulic + brake pipe handle to attach, from synthetic. Suitable for 4,5mm line.

Quality: 3

Hydraulic + brake pipe handle to attach, from synthetic. Suitable for 6,35mm line.

Quality: 3

Hydraulic line Brake line flaring tools for use at the vehicle (to use at the car). For all flanging! For all Citroen lines with 3,5mm, 4,5mm + 6,35mm (1/4 "). For all lines after DIN/CSAE, for flanges of the types CD, E, F, F180 in the usual quantities 4,75mm, 6mm, 8mm, 9mm and 10mm.

Quality: 1 Pdf

• Suitable for this article
• Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and aluminum lines.
  24,40 €

Pipe cutting equipment for brake hoses!

Quality: 3