Peugeot / 404 / brake hoses

Brake hose adapter from 7/16x24 UNF on 3/8x24UNF. Made in France

Quality: 3 Pdf

Brake hose copper sealing ring. Dimension: 10 x 16 x 1mm.

Quality: 3

Brake hose copper sealing ring. Dimension: 12 x 18 x 1,5mm.

Quality: 3

Brake hose copper sealing ring. Dimension: 13 x 19 x 1,5mm. Peugeot Or. No. 461001

Quality: 3

Brake hose copper sealing ring. Dimension: 14 x 18 x 1,5mm.

Quality: 3

Brake hose copper sealing ring. Dimension: 15 x 20 x 1,5mm. Peugeot Or. No. 444201

Quality: 3

Tap UNF 3/8 x 24 (single-cut tap). The thread is often found on brake parts such as wheel brake cylinders, master brake cylinders, brake hoses.

Quality: 3

Nut M10x1. Flat design. For fastening brake hoses.

Quality: 3

Nut M12x1,5. Flat design. For fastening brake hoses.

Quality: 3

Nut 1/2 -20 UNF, (thin nut). For the securement of brake hoses. Wrench: 3/4 x 5/16.

Quality: 3

Nut 3/8 -24 UNF, (thin nut). For the securement of brake hoses.

Quality: 3

Nut 5/8 x 18 UNF. For the securement of brake hoses.

Quality: 3

P 204, Rear brake hose. Fits Peugeot 204, probably up to 1966. Length: 287mm. Thread inside: 3/8 x 24 UNF (both sides). Thread outside: 5/8 x 18 UNF (both sides). Attention: These brake hoses are for brake line flare bolts with thread offset at the bottom! From approx. year of manufacture 1966 onwards, the flare screws have been replaced by a full thread! Or. No. 4816.09. Made in Europe.

Quality: 3

P 204/304/404/202, front brake hose. Fits Peugeot 204 + 304, from probably 1966 to 1969. Length: 376mm. Thread inside: 3/8 x 24 UNF (both sides). Thread outside: 5/8 x 18 UNF (both sides). Attention: These brake hoses are for brake line flare bolts through thread! Up to approx. year of manufacture 1966 the flare screws have a thread offet at the bottom! Made in Europe.

Quality: 3

P 204/404/202, brake hose front, suitable for Peugeot 204 + 404, up to presumably year of construction 1966. Peugeot 202 rear. Length: 376mm. Thread inside: 3/8 x 24 UNF (both sides). Thread outside: 5/8 x 18 UNF (both sides). Attention: These brake hoses are for brake line flare bolts with thread offset at the bottom! From approx. year of manufacture 1966 the flare screws have been replaced by a full thread! Made in Europe.

Quality: 3

• Suitable for this article
• Nut 5/8 x 18 UNF. For the securement of brake hoses.
  1,64 €

brake hose Peugeot 504 front 09/75-10/82, P 304, P305,P404,P604, length 401mm, connections male thread M10 + female thread 1x M10. Made in Europe.

Quality: 3

• Suitable for this article
• clip for brake hoses, Peugeot 304, 404, 504
  2,88 €

clip for brake hoses, Peugeot 304, 404, 504

Quality: 2

brake hose Peugeot 404, P305 front left 72-80, length 351mm, connection 1x M10 outside + 1x M10 inside. Made in Europe.

Quality: 3

P 403/404, brake hose rear. Length: 495mm. Suitable for Peugeot 404, first years of construction. Peugeot 403. Simca Aronde. Thread: 1 side male thread 5/8-18H + female thread 7/16-20H. Other side: Male thread 7/16-20H. Made in Spain.

Quality: 2

P 403/404, brake hose in front Peugeot 403 first model, Peugeot 404 first model, Simca Aronde. Overall length 410mm. Male thread 7/16 x 20 UNF, other side 7/16 x 20 UNF female threads, about 16mm male thread. Or. N0. 4806.05. Made in Spain.

Quality: 2

P 403/404/504/J7, brake hose rear, suitable for Peugeot 403, 404, 504, J7. Overall length 480mm. Connections both sides: Male thread 5/8 x 24UNF, female thread 3/8 x 24 UNF. Or.Nr. 445116 + 481607. Made in Europe.

Quality: 3

brake hose rear Peugeot 404 >1966 5/8 ca 16mm male thread, 7/16 ca 11mm female thread length 485mm.403 second model. J7 first model. Made in Spain.

Quality: 3

brake hose rear Peugeot 404U, length 270mm, both side threat 3/8-24h Made in Spain.

Quality: 2

brake hose Peugeot 404 rear, length 399mm, 3/8x24+5/8x18, 3/8x24 + 5/8x18. Made in Spain.

Quality: 3

brake hose Peugeot 404. rear 72-80, length 205mm, C15, Peugeot 305. connection male thread 2x M10

Quality: 3

P 404, brake hose in front, suitable for Peuegot 404 with brake assistance to year of construction 1966. Length: 354mm. Thread: 3/8 x of 24 male threads, 3/8 x of 24 female threads + 5/8 x of 18 male threads. Suitable for vehicles with 4,5mm brake hose. Made in Spain. Note : 404 without Hydrovac all had 7/16" until about 1966. The new lines with 3/8" thread appeared with the Hydrovac.

Quality: 2

P 404, brake hose in front, suitable for Peugeot 404 to year of construction 1966. Length: 354mm. Thread: 7/16x20 + 5/8x18 + 7/16x20. Suitable for vehicles with 6,35mm brake hose. Or. No. 480607. Made in Spain.

Quality: 3

P 404/504, brake hose in front + rear. Suitable for Peugeot 404, of year of construction 1969 to 1975. Peugeot 504, from 1968 to 08/1975. Peugeot 204, from 1968 to 1970. Length: 375mm. Connection: 1x male thread 3/8x24UNF. 1x male thread 5/8x18UNF with female thread 3/8x24UNF. Or. No. 4816.11 + 4816.12 . Made in Europe.

Quality: 3

• Suitable for this article
• Clinch screw. F-flange. Thread: 3/8 x 24UNF. Wrench: 11mm. Suitable for Renault 4, R8, R10, Flo
  1,24 €