Peugeot / 205 / screws + nuts

Soft top hood, push-button completely, for riveting. Universal fitting.

Quality: 2

Sheet metal nut, 2,9. For sheet metal driving screw with 2,9mm core diameter. Dimension: 12.0 x 11,0mm.

Quality: 3

Sheet metal nut, 3,5. For sheet metal driving screw with 3,5mm core diameter. Dimension: 16,50 x 11,0mm.

Quality: 3

• Suitable for this article
• Soft top hood, sheet metal driving screw from high-grade steel. For the push-button lower part
  0,42 €
• Sheet metal driving screw with large head, black galvanizes. Measurements: 3,5 x 16mm.
  0,45 €

Sheet metal nut, 3,9. For sheet metal driving screw with 3,9mm core diameter. Dimension: 16,50 x 11,30mm.

Quality: 3

Sheet metal nut, 4,2. For sheet metal driving screw with 4,2mm core diameter. Dimension: 16,50 x 11,20mm.

Quality: 3

• Suitable for this article
• Sheet metal driving screw with large head, black galvanizes. Measurements: 4.2 x 19 mm.
  0,38 €

Sheet metal nut, 4,8. For sheet metal driving screw with 4,8mm core diameter. Dimension: 16,50 x 14,50mm.

Quality: 3

• Suitable for this article
• Rosette nickel plated. For 5mm screw. Outside diameter: 13mm. Height: 3,0mm. These rosettes we
  0,94 €
• Screw cross lens head (4.8x22) in stainless steel. Per piece.
  0,38 €
• Screw cross lens head (4.8x32) in stainless steel. Per piece.
  0,39 €
• Screw chrome, for mounting the indicators. Suitable for Citroen DS, starting from year of const
  0,56 €

Clamp made of metal, for up to 10mm lines. (Cable harness, gasoline line, water hose etc.). The clip can be inserted on each sheet metal seam up to the maximum strength by 2mm.

Quality: 3

Spring Assortment, 200 pcs. Compression and extension springs, popular sizes

Quality: 3

R-Clip Assortment, 150 pcs. 6 popular sizes, 2.4 x 31 mm, 2.0 x 33 mm, 2.0 x 40 mm, 2.8 x 42 mm, 3.5 x 45 mm, 4.0 x 75 mm.

Quality: 3

Screw gauge metric + Whitworth. Angle of pressure 60° with 24 upward gradients 0,25-6mm. Angle of pressure 55° with upward gradients 4-62 gear on 1 ".

Quality: 3

Rubber silent block M10. Diameter: 40mm. Overall height: 28mm. Suitable for Renault R16 and many different.

Quality: 3

• Suitable for this article
• Nut M10, galvanized
  0,38 €

Silent block M8. Diameter: 40mm. Overall height: about 28mm. Thread: M8

Quality: 3 360°

• Suitable for this article
• M8, nut for 12mm wrenche. (Metal) (e.g. carburetor on intake manifold 2CV).
  0,75 €

Exhaust silent rubber. Thread: M6. Height: 21mm. Suitable for Peugeot 205, 309, 504, 505, 604. Or. No. 1439.10

Quality: 3

Heli coil application M7. Length: 10,5mm (Thread repair)

Quality: 2

Heli coil application M7. Length: 14,0mm (Thread repair)

Quality: 2

Heli coil application M7. Length: 7,0mm (Thread repair)

Quality: 2

Helicoil repair set for M7. Consisting of: Twist drill (to M12), hand taps from HSS, mounting spindle, insertion pin breaker (to M12). In each case, 10 theaded inserts M7 in the lengths: 7,0mm, 10,5mm, 14,0mm. Original Helicoil, no reproduction.

Quality: 2

Roll Pin Assortment, 450 pcs. Diameter from 2 > 10mm, lenght 5>50mm.

Quality: 3

Cable tie assortment (black). 75 pieces. Content: 25 cable ties 3.0 x 100 mm, 25 cable ties 3.0 x 120 mm, 25 cable ties 3.6 x 200 mm

Quality: 3

Box nut M5 (casing nut). External dimension: 13.5 x 13,5mm. Suitable for Citroen DS, 2CV, HY ......

Quality: 3

Castle nut, M14X1,5. Low version

Quality: 3

Crown nut M18x1,5. Low design. E.G. for ball pin Citroen HY. Or. No. ZC9441 178U

Quality: 3

Copper sealing ring, diameter inside 14,3mm. (14,3x19x1,5)

Quality: 3

Copper seal type A, (full copper). 16x22x1,5mm.

Quality: 3

LOCTITE 243, liquid screw protection, middle sttrong, indispensable for all car work

Quality: 2

spring washer M10, galvanized

Quality: 3

Nut M10, galvanized

Quality: 3

Nut M10x1. Flat design. For fastening brake hoses.

Quality: 3

Srew M10x70

Quality: 3

Spring washer M12

Quality: 1

Washer Stainless steel M12

Quality: 3

Nut selflocking M12 x 1,5.

Quality: 3

Nut M12x1,5. Flat design. For fastening brake hoses.

Quality: 3

Nut M3 galvanized (chrome trim ventilation shutter)

Quality: 3

Nut M4 galvanized

Quality: 3

screw M4x12, galvanized (machine screw)

Quality: 3

Nut M5, galvanized

Quality: 3

M5x10, screw galvanizes.

Quality: 3

M5x16/screw from high-grade steel (1 piece)

Quality: 1

Screw M5x16, galvanized

Quality: 3

M5x20, screw galvanizes.

Quality: 3

M5x20, pitch 0,75! Screw yellow chromated. Note: This screw has a 0.75 pitch, as it was originally installed from Citroen, at the beginning of the seventies (S.i.m). Today's screws have 0,80 pitch! (ISO)

Quality: 3

spring washer M6 galvanized

Quality: 3

Nut M6, galvanized

Quality: 3

washer M6, galvanized

Quality: 3

M6x10 / screw galvanizes. For the securement of wheel brake cylinder.

Quality: 3

Screw M6x20, galvanized

Quality: 3

Screw galvanized M6x30

Quality: 3

M7 welding nut (DIN929). Per piece

Quality: 3

Spring washer M7 high-grade steel

Quality: 3