Citroen-DS-11CV-HY / 11CV+ 15CV / carburetor + carburetor gasket sets

Adapter ring from aluminum, in order to mount the original air filter on a new carburetor Solex 34 (Zenith to Solex). Suitable for Citroen 11CV with D engine.

Quality: 3

CO adjusting screw, M 5x0,75 mm, (idle mixture adjusting screw), for Solex carburetor. Suitable for Citroen 2CV (round carburetor). Citroen 11CV, HY, DS. Renault 4CV, Dauphine, R4, Caravelle, Floride. Peugeot 203, 403, 404, 504.

Quality: 3

CO tester (exhaust tester). Digitally. Optimally for the experienced mechanician, in order to adjust the carburetor. We use it since years for our classic cars! English operating instructions are attached. For the language German, Dutch, Spanish, Italian, French can be down-load the operating instructions of our homepage.

Quality: 3 Pdf

Ball valve for Solex carburetor 30/32/34 PICS. Suitable for Citroen 2CV4 + 2CV6 with single carburetor (round carburetor). Also suitable for Peugeot + Renault.

Quality: 4

Float from copper, in the carburetor, for Solex carburetor 30/32/34-PICS/PCIS. Diameter above: 37mm, down: 25mm, float height: 27mm. Installed one e.g. in 2CV4+6, Peugeot, Dauphine etc.

Quality: 4

Solex, carburetor nozzle set, for Solex 32 PBIC. Suitable for Peugeot 203 + Citroen 11CV. Consisting of: 1x main jet 190. Hollow bolt with external 135 nozzle. 1x slow-running jet 60. 1x mixing tube. 1x hollow bolt with internally 125 nozzle + 1x 50 nozzle.

Quality: 3

Carburetor sealing set, for Solex PBICA. Suitable for Citroen 2CV, DS, 11CV, HY. Peugeot 403, 404, 504 L, J7. Renault Dauphine + Floride. The diaphragm has a diameter of 20mm.

Quality: 3

Carburetor ring spanner, for the 12mm nut. Suitable for Citroen 11CV, HY, DS

Quality: 3

Carburetor, Solex 34 PBIC. Reproduction. Suitable for Citroen 11CV D.

Quality: 4 360°

Carburetor, type Solex 32PBIC. Reproduction. Suitable for Citroen 11CV, with PERFO engine. The carburetor can be used also for Peugeot 203, 403, P60.

Quality: 4 360°

Carburetor sealing set small, Solex PBICA. Suitable for Peugeot 203, 403, 404. Citroen 11CV, HY, DS (early years of construction).

Quality: 3

Seal under carburetor oval (2 fittings). Suitable for Citroen ID19, HY, 11CV. Peugeot. Inside diameter: 34mm. Spacer bolt center to spacer bolt center: about 61mm. Or. No. 481717. This seal fits almost to all Solex 34 carburetors.

Quality: 3

• Suitable for this article
• Seal under carburetor, distance plate between intake manifold and carburetor. Suitable for Citr
  5,62 €

Seal under carburetor, distance plate between intake manifold + carburetor (Solex carburetor). Suitable for Citroen 11CV. Inside diameter: about 33mm. Outside diameter: about 77mm. Wide one: 50mm. Overall height: 5mm. Or. No. 481481

Quality: 3

Seal under carburetor. Suitable for Citroen 15CV. Or No. 456879

Quality: 3