Citroen-2CV / Mehari / Cylinder head

2CV, plate for the valve spring. Suitable for Citroen 2CV. Diameter: 30mm. Height over everything: 7,50mm. Or. No. AM124-11C

Quality: 3

2CV6, valve spring outside (large spring), for inlet + exhaust valve Citroen 2CV6. Outside diameter: 31,5mm. Height: 47,5mm. Or. No. AM124-25A

Quality: 3

2CV6, centering plate for the valve spring. Suitable for Citroen 2CV6. Or.Nr.AZ1241

Quality: 3

2CV6, nut for the rocker arm. (Securement). Suitable for Citroen 2CV6. Or.Nr.AM11298

Quality: 3

Rocker lever axle check disk, suitable for Citroen 2CV4 + 2CV6. Measurement: 19 x 14,5 x 1mm. Or.Nr. AM124-85

Quality: 4

Rocker lever axle fixing bolt (special bolt head). Suitable for Citroen 2CV6, Dyane, Mehari. Dimension: M8x44. Or. No. ZC9622812U

Quality: 3

• Suitable for this article
• Tool 1677-T, for the nuts (6x9mm) the rocker arm and at the gearbox (Citroen 2CV). Clutch housi
  16,76 €

Rocker lever axle spring washer, suitable for Citroen 2CV6. Measurements: 14.9 x 18.8 x 0,23mm.

Quality: 3

Rocker lever axle spring washer, suitable for Citroen 2CV6. Measurements: 14.9 x 18.8 x 1,05mm. Or.Nr.ZC9624021U

Quality: 3

Exhaust manifold gasket made of copper 2CV6 (pure copper, 1.5mm thick!). Suitable for all 597/602cc engines. Citroen 2CV6, Dyane 6, ACDY, Mehari, AMI8. Made in Germany

Quality: 1

Manifold seal exhaust, for 602cc engine. 2CV6. Or.Nr. 96177786.

Quality: 3

• Suitable for this article
• Manifold seal inlet, for 602cc engine. Citroen 2CV6. Or.Nr. 96177787. Measurement: 28,3x43,75mm
  1,54 €
• copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copp
  1,46 €

Elbow seal inlet 2CV6, improved version. The seal is made of most significant seal material. Preparation of Reinz Germany. Measurement: 28,3x43,75. Or.Nr.: 96177787

Quality: 2

• Suitable for this article
• Elbow seal exhaust 2CV6, improved version. The seal is made of most significant seal material.
  7,33 €
• copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copp
  1,46 €

Manifold seal inlet, for 602cc engine. Citroen 2CV6. Or.Nr. 96177787. Measurement: 28,3x43,75mm

Quality: 3

• Suitable for this article
• Manifold seal exhaust, for 602cc engine. 2CV6. Or.Nr. 96177786.
  1,54 €
• copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copp
  1,46 €

M7, stud bolt for 2CV, DS, R4. Measurement: 38mm. (e.g. elbow spider on cylinder head 2CV).

Quality: 3

• Suitable for this article
• copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copp
  1,46 €

Oil line for 2CV6, significant reproduction from the European Union. Produced from cuprous nickel! (Oil line from the engine block to the cylinder heads)

Quality: 1

• Suitable for this article
• Oil line double seal M7 for the hollow bolt. (Connector of the oil line at the cylinder head).
  0,95 €
• Oil line hollow bolt 2CV6, M7, for the connector at the cylinder head. (small bore 0,4mm). Leng
  4,95 €
• Oil line hollow bolt 2CV6, M7, for connector at the engine block. (large bore 2,0mm). Significa
  4,95 €

Stud bolt short, for 2CV6, engine block to the cylinder head. For engines with 602ccm (598ccm). Length: 210 mm.

Quality: 3

Stud bolt M7 on M8. 45mm lengths. Special production!

Quality: 2

• Suitable for this article
• copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copp
  1,46 €

Stud bolt M8 on M10. 38mm lengths. Special production!

Quality: 2

• Suitable for this article
• M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €
• M8, copper nut M8, for 13mm tool. Universal suitable e.g. for exhausts + exhaust manifolds.
  0,88 €

Valve push rod tube spring for Citroen 2CV4+6. Or.Nr.: 75516419

Quality: 3

• Suitable for this article
• Follower tubing seal - sheet metal plates, for Citroen 2CV6 starting from year of construction
  7,89 €

Valve push rod tube for 2CV6 (602ccm engine), first version. Length: 190mm. The valve push rod tube has an outer diameter of 18mm. The fit (offset on the valve push rod tube) on the cylinder head is 17x34mm. Suitable for all 2CV engines with 602ccm. High quality reproduction from the EU.

Quality: 3 360°

• Suitable for this article
• Valve push rod tube seal, for Citroen 2CV6 starting from year of construction 07/1978. Per piec
  1,67 €

Valve push rod tube for 2CV6 (602ccm engine), first version. Length: 190mm. The valve push rod tube has an outer diameter of 18mm. The fit (offset on the valve push rod tube) on the cylinder head is 17x34mm. Suitable for all 2CV engines with 602ccm. Reproduction

Quality: 4 360°

• Suitable for this article
• Valve push rod tube seal, for Citroen 2CV6 starting from year of construction 07/1978. Per piec
  1,67 €

Follower tubing seal - sheet metal plates, for Citroen 2CV6 starting from year of construction 10/1972. Suitable for the follower tubing seal with narrow connecting post. Per piece!

Quality: 2

• Suitable for this article
• Valve push rod tube seal, for Citroen 2CV6 starting from year of construction 07/1978. Per piec
  1,67 €
• Valve push rod tube spring for Citroen 2CV4+6. Or.Nr.: 75516419
  3,71 €
• Valve push rod tube seal for Citroen 2CV6, starting from year of construction 07/1978. The seal
  11,81 €

Valve push rod tube seal for Citroen 2CV4 + 2CV6, of year of construction 1970 to 1978. Per piece.

Quality: 3

• Suitable for this article
• Follower tubing seal - sheet metal plates, for Citroen 2CV6 starting from year of construction
  7,89 €

Valve push rod tube seal for Citroen 2CV6, starting from year of construction 07/1978. The seals are produced from silicone!

Quality: 1

• Suitable for this article
• Follower tubing seal - sheet metal plates, for Citroen 2CV6 starting from year of construction
  7,89 €

Valve push rod tube seal, for Citroen 2CV6 starting from year of construction 07/1978. Per piece! Manufacturer original "GLASER".

Quality: 2

• Suitable for this article
• Follower tubing seal - sheet metal plates, for Citroen 2CV6 starting from year of construction
  7,89 €

Outlet valve for 2CV6, per unit. 34 x 87,1 x 8,5mm. Or.no.: 95536027

Quality: 3

• Suitable for this article
• Inlet valve for 2CV6, 40 x 88,4 x 8 mm. Or.no.: 95536026
  8,88 €
• Valve spring cotter for Citroen 2CV6, final version. The valve stem has 3 grooves. Suitable for
  1,94 €
• universal valve spring cpmpressor, for the development of the valves + valve springs.
  44,53 €

Inlet valve for 2CV6, 40 x 88,4 x 8 mm. Or.no.: 95536026

Quality: 3

• Suitable for this article
• Outlet valve for 2CV6, per unit. 34 x 87,1 x 8,5mm. Or.no.: 95536027
  10,81 €
• Valve spring cotter for Citroen 2CV6, final version. The valve stem has 3 grooves. Suitable for
  1,94 €
• universal valve spring cpmpressor, for the development of the valves + valve springs.
  44,53 €

Valve clearance adjustment screw, suitable for Citroen 2CV6 + 4. Measurement: 7x17,5mm, overall length 25mm. Or.Nr. A124-4

Quality: 3

Valve cap reproduction, galvanizes, for Citroen 2CV4 + 2CV6. Or.Nr. 75478957. The valve cap is tightened frequently too strongly, and licks then oil.

Quality: 3

• Suitable for this article
• Valve cover gasket for Citoen 2CV6 + 2CV4. Material rubber. Manufacturer: Original GLASER. Made
  1,64 €
• Valve cap nut, suitable for Citroen 2CV6 + 2CV4. Reproduction.
  3,07 €

2CV starting from 1971, stud bolt M7x76mm, for the mounting the valve cap on the cylinder head! Suitable for Citroen 2CV starting from year of construction 1971.

Quality: 3

2CV until 1971, stud bolt M7x83,5mm, for the mounting the valve cap on the cylinder head! Suitable for Citroen 2CV to year of construction 1971.

Quality: 3

Valve cap nut, suitable for Citroen 2CV6 + 2CV4. Reproduction.

Quality: 4

• Suitable for this article
• Valve cover gasket for Citoen 2CV6 + 2CV4. Material rubber. Manufacturer: Original GLASER. Made
  1,64 €

Valve cover gasket for Citoen 2CV6 + 2CV4. Material rubber. Manufacturer: Original GLASER. Made in Germany.

Quality: 2 Video

• Suitable for this article
• Valve cap nut, suitable for Citroen 2CV6 + 2CV4. Reproduction.
  3,07 €

Valve cover gasket for Citoen 2CV6 + 2CV4. Material cork.

Quality: 3

Valve clearance gauge. 0,05 > 1,00mm. Precision - feeler gage with conical lamellas

Quality: 3

valve spring inside (small spring), for inlet + exhaust valve Citroen 2CV6 + 2CV4. Outside diameter: 22,5mm. Height: 31,5mm. Or.Nr. AM124-9A

Quality: 3

Valve guide exhaust for 2CV6. Length: 42mm, diameter: 8,5mm.

Quality: 3

Valve guide inlet valve for Citroen 2CV6. Length: 47mm, outside diameter 12,5mm, inside diameter 8,00mm, fit above 10,5/11mm.

Quality: 3

Valve spring cotter for Citroen 2CV6, final version. The valve stem has 3 grooves. Suitable for inlet + exhaust valve. You need 2 pieces per ventil.

Quality: 2

Valve stem seals, set (4 fittings), for Citroen 2CV6. Original Glaser. Inside diameter: 7,9 + 7,4mm.

Quality: 3