Citroen-2CV / 2CValt / oil feed + oil cooling + oil filter

Copper sealing ring, diameter inside 14,3mm. (14,3x19x1,5)

Quality: 3

Oil drain screw magnetically, suitable for Citroen 2CV, HY, DS, 11CV (with oil pan out of sheet metal). Interior square. The suitable tool has our number 20221. Or. No. A1321M, thread M16x1,5x20

Quality: 3

• Suitable for this article
• Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw, mea
  0,48 €
• Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of the original oil
  31,14 €
• Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €
• Special tool for the oil drain screw. Square 8 + 10mm. Suitable for Peugeot + Renault.
  10,81 €

Oil drain screw (engine + gearbox) suitable for Citroen 2CV, DS, HY, GS. Thread M16.

Quality: 4

• Suitable for this article
• Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw, mea
  0,48 €
• Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of the original oil
  31,14 €
• Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €

Oil drain screw seal 18 x 24 x 2mm (for M18 thread). Suitable for Peugeot 203, 403, 404, 504, 505, J7 (all engines). Renault R4. Citroen HY. Oil cooler screwed joint 2CV with 16HP!

Quality: 4

Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw, measure: 16,3x22x2mm. Version C, curved with a seal inside. (PTFE)

Quality: 3

Oil pressure switch, suitable for Citroen ID19, DS19, HY petrol. Citroen 2CV + AMI6 without oil filters! Thread: M14x1,5.

Quality: 2 360°

• Suitable for this article
• Cable connector set, 160 pieces.
  19,73 €

Oil pressure valve repair set for Citroen 2CV (375, 425, 435cc³). Consisting of spring, ball, ball fixture, slip piece (12,20mm long).

Quality: 3

Oil pressure valve repair set for Citroen 2CV (375, 425, 435cc³). Consisting of spring, ball, ball fixture, slip piece (16,30mm long).

Quality: 3

Oil filler neck seal down, old version. For 2CV with 16 HP engines. Center in the middle about 30mm, hole spacing connector ca.46mm. Or. No. A221 92

Quality: 3

Oil filler neck ventilator rubber (sniffer valve), suitable for Citroen 2CV with 16 HP engine.

Quality: 4

Oil filler neck for 2CV with 18 HP engine. Reproduction, Or.Nr.: A 221.03

Quality: 4 360°

Oil filler neck rubber cap, suitable for Citroen 2CV (12HP), to year of construction 1963. Or.Nr.: A17199

Quality: 3

Oil filler neck. Suitable for Citroen 2CV (also A-type), to year of construction 3/1963. Short overall height.

Quality: 4

Oil filter tool (76mm inside diameter) , particularly for PURFLUX oil filter with 6 or 12 slots. (Citroen 2CV)

Quality: 2

Tool universal for oil filtre, fits for all oil filter, also to remove spheres!

Quality: 2

Oil cooler. Suitable for Citroen 2CV, to year of construction 03/1963. Engine: 425cm ³. Reproduction. Or. No. A2251.

Quality: 4

Oil cooler for Citroen 2CV4. Or. no.: 5440575

Quality: 4

• Suitable for this article
• Oil cooler line seal, from rubber. Per piece! The rubber seals the oil cooler line in the conne
  0,48 €
• Oil cooler tool (to release the connector nut of the oil line, which goes into the engine block
  14,86 €

Oil cooler pipe, old version. Suitable for Citroen 2CV, from the fifties and sixties. Or. No. AZ22588

Quality: 4

Engine oil dipstick rubber application above in the guide tube. (Fixture + guide rubber engine oil dipstick). Suitable for Citroen 2CV old + 2CV4. Lenght: 40mm. Or.Nr. A221-95a

Quality: 4

Engine oil dipstick for Citroen 2CV (12 HP).

Quality: 4

Suction screen engine oil, mounts in the oil pan. Angular version, suitable for 2CV4. Or.Nr.: AZ221.1

Quality: 4 360°

Oil pump for Citroen 2CV to year of construction 01/1963. 5 teeth. Outside diameter: 42mm, strength: 10,9mm. Without case. Or.Nr.: AZ222-8

Quality: 4